Synthesis of In<Subscript>2</Subscript>O<Subscript>3</Subscript>nanoparticles by thermal decomposition of a citrate gel precursor

This paper describes the synthesis of indium oxide by a modified sol–gel method, and the study of thermal decomposition of the metal complex in air. The characterization of the intermediate as well as the final compounds was carried out by thermogravimetry, differential thermal analysis, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and small angle X-ray scattering. The results show that the indium complex decomposes to In₂O₃ with the formation of an intermediate compound. Nanoparticles of cubic In₂O₃ with crystallite sizes in the nanosize range were formed after calcination at temperatures up to 900°C. Calcined materials are characterized by a polydisperse distribution of spherical particles with sharp and smooth surfaces.This revised version was published online in August 2005 with a corrected issue number.     

Observation of upconversion fluorescence and stimulated emission based on three-photon absorption

The observations of three-photon-induced frequency-upconversion fluorescence and the highly directional stimulated visible emission in two dyes, 4-[p-(dicyanoethylamino) styryl]-N-methylpyridinium iodide (abbreviated as CEASP) and the complex of CEASP and Ce(NO₃) (abbreviated as CEASP-Ce), are reported. The photographs of the forward amplified spontaneous emissions spots, pumped by an optical parametric oscillator idler with a pulse width of 8 ns and a wavelength of 1.3 μ m, are shown. The upconversion fluorescence produced both in dimethyl formamide solution and 2-hydroxyethyl methacrylate (HEMA) polymer spans from green to red, with a cubic dependence on the pump light intensity. The experimental results imply that the existence of the lanthanide ion Ce^{3 +} sensitizes the nonlinear absorption and emission.     

A novel frame shift and integral technique for processing low-light-level moving image sequence

A new method for processing low-light-level moving image sequence is proposed, in which (1) a novel algorithm based on difference processing has been firstly developed to determine the motion parameters of moving image sequence, (2) the spatial relativity of the frames within moving image sequence can be then well established after frame shifting according to motion parameters obtained above, (3) finally, frame integration method can be applied to each processed frame, thereby increasing the signal-to-noise ratio of low-light-level moving image sequence. Experiments have been carried out to verify the validity of the proposed method, which show that the parameters obtained by the developed algorithm coincide well with the actual values, and the SNRs of the moving image sequences were effectively increased with the proposed method, indicating that the method offers significant advantages in the enhancement of low-light-level moving image sequence.     

Asymmetric molecular harmonic assisted generation of the attosecond X-ray pulse

In this paper, we theoretically investigate the asymmetric molecular high-order harmonic emission and the attosecond X-ray pulse generation when the asymmetric molecular HeH²⁺ ion is exposed to an intense chirped pulse. It is found that the molecular harmonics are strongly dependent on the internuclear distance R as well as the chirp parameter, showing a smooth and intense harmonic plateau at R = 8.0 a.u. and β = 0.4. Further, by adding a subharmonic controlling pulse with the optimised conditions, a supercontinuum with a bandwidth of 602 eV can be obtained. Finally, by properly superposing the selected harmonics in the supercontinuum region, a series of isolated X-ray pulses with durations of sub-80 as are directly generated.     

HT-7托卡马克slide-away放电充气对等离子体行为的影响

本文研究了slide-away放电条件下的等离子体约束性能;分析了充气对等离子体约束性能以及反常多普勒共振不稳定性的影响.研究了等离子体密度的提升对slide-away放电过程中逃逸电子辐射行为的影响.研究结果发现:slide-away放电充气可以抑制逃逸电子反常多普勒不稳定性,但是使得等离子体约束状态变差,逃逸电子辐射增强.     

Short-length microstructured phosphate glass fiber lasers with large mode areas

We report fabrication and testing of the first phosphate glass microstructured fiber lasers with large Er-Yb-codoped cores. For an 11-cm-long cladding-pumped fiber laser, more than 3 W of continuous wave output power is demonstrated, and near single-mode beam quality is obtained for an active core area larger than 400 microm2.     

Thermally switchable and discretely tunable comb filter with a linearly chirped fiber Bragg grating

We propose and experimentally demonstrate a novel switchable and discretely tunable comb filter based on a thermally induced linearly chirped fiber Bragg grating. Experimentally we achieved a thermally induced optical bandpass filter that has eight switchable passband peaks with peak separations of 1.6 and 3.2 nm, a very narrow bandwidth (as small as 10 pm) of each peak, a tunable range of 16.5 nm, and a greater than 25 dB rejection ratio. Two spectral peaks separated by only 0.8 nm were also obtained with this comb filter. This filter provides the unique advantages of an all-fiber structure, switchable spectral peaks, independent tuning of the center wavelength and wavelength spacing of the spectral peaks, low polarization sensitivity, simple structure, ease of fabrication, and low cost.     

Graphitization of activated carbon under high pressures and high temperatures

Activated carbon was treated at 5.0 GPa up to 1600 ^°C and the structural evolution in the graphitization process was investigated. The graphitization temperature is reduced to 1200 ^°C at 5 GPa, as reflected by x-ray diffraction patterns. Honeycomb-like structures come into being in the high-pressure sintering temperature range of 1000–1100 ^°C and slice-like structures appear after graphitization. Raman frequency and half width drop drastically near the graphitization temperature, and the appearance of D and D′ lines indicates there are still some disorder structures in the graphitized activated carbon.     

Orientation dependence of the electrocaloric effect of ferroelectric bilayer thin films

An analytical thermodynamic theory is applied to investigate the electrocaloric effect of ferroelectric BaTiO₃/SrTiO₃ bilayer thin films with different orientations at room temperature. Theoretical analysis indicates that the strong electrostatic coupling between the layers results in the suppression of ferroelectricity at a critical relative thickness which occurs approximately at 50%, 23%, and 12% of SrTiO₃ fraction in the (001), (110), and (111) bilayer thin films, respectively. The ferroelectric bilayer thin films are respected to have the largest electrocaloric effect at this critical relative thickness. Moreover, the electrocaloric effect strongly depends on the orientation and the (110) oriented bilayer thin films have the largest electrocaloric effect. Consequently, control of the orientation and the relative thickness of SrTiO₃ layer can be used to adjust the electrocaloric effect of ferroelectric bilayer thin films, which may provide the potential for practical application in refrigeration devices.