Synthesis and Conformational Analysis of the Multidrug Resistance-Reversing Agent Hapalosin and Its Non-N-methyl Analog

Hapalosin was initially synthesized by macrolactonization, and a second synthesis was achieved by cycloamidation. In both syntheses, three of the five stereocenters in hapalosin were established by two Brown allylboration reactions. The synthesis of the non-N-Me analog of hapalosin involved chelation-controlled reduction of a gamma-amino-beta-keto ester and cycloamidation. In CDCl(3) at 25 degrees C, synthetic hapalosin exists as a 2.3:1 mixture of conformers, while its non-N-Me analog exists only as a single conformer. (1)H,(1)H-NOESY and computation reveal that the configuration of the amide bond is responsible for the conformations of the two compounds. The major conformer of hapalosin is found to be an s-cis amide, the minor conformer an s-trans amide, and the non-N-Me analog an s-trans amide. Applying distance constraints to protons that exhibit NOESY correlations, computation shows that the major conformer of hapalosin and the non-N-Me analog have very different conformations. By contrast, the minor conformer of hapalosin and the non-N-Me analog have very similar conformations.     

Subsolidus phase relations and crystal structure of compounds in the PrOx-CaO-CuO system

The subsolidus phase relations of the PrO_x-CaO-CuO pseudo-ternary system sintered at 950-1000°C have been investigated by X-ray powder diffraction. In this system, there exist one compound Ca₁₀Pr₄Cu₂₄O₄₁, one Ca₂Pr₂Cu₅O₁₀-based solid solution, seven three-phase regions and two two-phase regions. The crystal structures of Ca₁₀Pr₄Cu₂₄O₄₁ and Ca₂Pr₂Cu₅O₁₀-based solid solution have been determined. Compound Ca₁₀Pr₄Cu₂₄O₄₁ crystallizes in an orthorhombic cell with space group D_2h²⁰−Cccm, Z=4. Its lattice parameters are a=11.278(2) Å, b=12.448(3) Å and c=27.486(8) Å. The crystal structure of Ca₂Pr₂Cu₅O₁₀-based solid solution is an incommensurate phase based on the orthorhombic NaCuO₂ type subcell. The lattice parameters of the subcell of the Ca_2.4Pr_1.6Cu₅O₁₀ are a₀=2.8246(7) Å, b₀=6.3693(5) Å, c₀=10.679(1) Å, and those of the orthorhombic superstructure are with a=5a₀, b=b₀, c=5c₀. The Ca_2.4Pr_1.6Cu₅O₁₀ structure can also be determined by using a monoclinic supercell with space group C_2h⁵−P2₁/c, Z=4, a=5a₀, b=b₀, and β=104.79(1)° or 136.60(1)°, V=5a₀b₀c₀.     

Studies on the inactivation of bovine liver enoyl-CoA hydratase by (methylenecyclopropyl)formyl-CoA: elucidation of the inactivation mechanism and identification of cysteine-114 as the entrapped nucleophile

The inhibitory properties of (methylenecyclopropyl)formyl-CoA (MCPF-CoA), a metabolite derived from a natural amino acid, (methylenecyclopropyl)glycine, against bovine liver enoyl-CoA hydratase (ECH) were characterized. We have previously demonstrated that MCPF-CoA specifically targets ECHs, which catalyze the reversible hydration of alpha,beta-unsaturated enoyl-CoA substrates to the corresponding beta-hydroxyacyl-CoA products. Here, we synthesized (R)- and (S)-diastereomers of MCPF-CoA to examine the stereoselectivity of this inactivation. Both compounds were shown to be competent inhibitors for bovine liver ECH with nearly identical second-order inactivation rate constants (k(inact)/K(I)) and partition ratios (k(cat)/k(inact)), indicating that the inactivation is nonstereospecific with respect to ring cleavage. The inhibitor, upon incubation with bovine liver ECH, labels a tryptic peptide, ALGGGXEL, near the active site of the protein, where X is the amino acid that is covalently modified. Cloning and sequence analysis of bovine liver ECH gene revealed the identity of the amino acid residue entrapped by MCPF-CoA as Cys-114 (mature sequence numbering). On the basis of gHMQC (gradient heteronuclear multiple quantum coherence) analysis with [3-(13)C]-labeled MCPF-CoA, the ring cleavage is most likely induced by the nucleophilic attack at the terminal carbon of the exomethylene group (C(2)'). We propose a plausible inactivation mechanism that involves relief of ring strain and is consistent with examples found in the literature. In addition, these studies provide important clues for future design of more efficient and selective inhibitors to control and/or regulate fatty acid metabolism.     

Electron energy loss studies of room-temperature co adsorption on Cu(100) induced by electron or ion irradiation

A custom-built multi-technique portable spectrometer was used to study the vibrational (and electronic) excitations associated with the “anomalous” CO adsorption recently observed on clean and oxidized Cu(100) surfaces at room temperature. Results from the electron energy loss (and thermal desorption) experiments have provided strong evidence for in-situ CO production induced by low-energy electron or ion irradiation of CO or C₂H₄ on Cu(100). In particular, the C-O vibrational stretch frequency for the room-temperature CO adsorption was found to be red-shifted by 9 meV from its nominal position (259 meV) and could be observed even at temperature as high as 420 K. Several plausible mechanisms involving coadsorbate interactions with CO on metal surfaces have been discussed. A direct interaction model involving partial bonding between CO, adsorbed on an atop site, and a coadsorbed O atom in a four-fold hollow site was found to be adequate in explaining the observed red shift and the apparent stabilization of CO on Cu(100) at room temperature.     

Synthesis of N,N-diethyldithiocarbamate functionalized 1,4-polyisoprene, from natural rubber and synthetic 1,4-polyisoprene

N,N-Diethyldithiocarbamate functionnalized 1,4-polyisoprenes were prepared from 1,4-polyisoprenes (natural or synthetic). The syntheses were performed by nucleophilic addition of N,N-diethyldithiocarbamate salts upon oxirane rings of epoxidized units according to a SN2 mechanism with ring opening. Studies on model molecules of epoxidized 1,4-polyisoprene units (1,2-epoxy-1-methylcyclohexane and 4,5-epoxy-4-methyloctane) were previously achieved to develop the procedure. The best yields were obtained at low temperature in polar medium, and more especially in water with sodium N,N-diethyldithiocarbamate (DEDT-Na) as reagent. A diastereospecific addition was noted when reaction was performed in water with DEDT-Na. Afterwards, the developed procedure was successfully generalized to epoxidized synthetic polyisoprenes and epoxidized natural rubber (in THF, then in latex medium). Excellent results were obtained in latex medium with epoxidized natural rubber (ENR) latices. As with the models, a diastereospecific addition of sodium N,N-diethyldithiocarbamate trihydrate onto epoxidized 1,4-polyisoprene units of ENR was observed at the condition to bring the latex medium to pH 8 before introduction of DEDT-Na. Influence of temperature, drc, and DEDT-Na concentration were successively examined to determine the best conditions of the addition on ENR latices.     

A general approach to cyathin diterpenes. Total synthesis of allocyathin B(3)

[reaction: see text] The synthesis of allocyathin B(3) from an advanced intermediate possessing the ring system and relative stereochemistry but lacking the isopropyl and hydroxymethyl groups is reported. The isopropyl group was introduced by radical cyclization of a methyl propargyl acetal of an alpha-bromo ketone, and the hydroxymethyl group was generated by Pd-catalyzed carbonylation of a vinyl triflate. The route provides functionalized intermediates that could allow access to more complex members of the cyathin family of diterpenes.     

Voltammetry and electrocatalytic properties of cobalt (1,4,8,12-tetraazacyclopentadecane) in aqueous solution

Summary The spectrochemical, electrochemical and electrocatalytic properties of Co[15]aneN₄ ([15]aneN₄ = 1,4,8,12-tetraazacyclopentadecane) have been investigated. The results show that, in aqueous solution, this compound mainly exists as three species whose axial coordination positions are occupied by water and/or hydroxy ligands; it is marginal whether other substrates such as Cl^– and NO _inf3 ^sup– interact with the central ion in acid-base solutions. The approximate Pourbaix diagram of Co^III/II[15]ane N₄ was determined. There is an electrochemically-induced isomerization between two trans conformational isomers of the Co[15]aneN₄ complexes in acid and netural solutions. The Co[15]aneN₄ complex has electrocatalytic properties for reduction of nitrate and nitrite only in strong alkaline solution.     

Electrical activity of dislocations: Prospects for practical utilization

The electrical activity of interfacial misfit dislocations in silicon has been examined using the electron beam induced current technique (EBIC) in a scanning electron microscope. Clean misfit dislocations, i.e. no EBIC contrast, formed during high-temperature Si(Ge) chemical vapor epitaxy were studied. These defects were subsequently decorated with known metallic impurities (Au and Ni) by diffusion at 400° C to 1130° C from a back-side evaporated layer. Qualitative analysis of the electrical activity in relation to the energy levels anticipated for the clean or decorated dislocations is presented. Of particular interest is the case of defect-induced conductivity type inversion which occurred both at the top surface and at the buried dislocated interfaces of the multilayer. The prospects for using dislocations in a beneficial manner as active elements in electronic devices are discussed.     

New layered materials: syntheses, structures, and optical and magnetic properties of CsGdZnSe3, CsZrCuSe3, CsUCuSe3, and BaGdCuSe3

Four new quaternary selenides CsGdZnSe3, CsZrCuSe3, CsUCuSe3, and BaGdCuSe3 have been synthesized with the use of traditional high-temperature solid-state experimental methods. These compounds are isostructural with KZrCuS3, crystallizing with four formula units in the orthorhombic space group Cmcm. Cell constants (A) at 153 K are CsGdZnSe3 4.1684(7), 15.765(3), 11.0089(18); CsZrCuSe3 3.903(2), 15.841(10), 10.215(6); CsUCuSe3 4.1443(7), 15.786(3), 10.7188(18); and BaGdCuSe3 4.1839(6), 13.8935(19), 10.6692(15). The structure of these ALnMSe3 compounds (A = Cs, Ba; Ln = Zr, Gd, U; M = Cu, Zn) is composed of 2 to infinity [LnMSe3(n-)] (n = 1, 2) layers separated by A atoms. The Ln atom is octahedrally coordinated to six Se atoms, the M atom is tetrahedrally coordinated to four Se atoms, and the A atom is coordinated to a bicapped trigonal prism of eight Se atoms. Because there are no Se-Se bonds in the structure, the oxidation state of A is 1+ (Cs) or 2+ (Ba), that of Ln is 3+ (Gd) or 4+ (Zr, U), and that of M is 1+ (Cu) or 2+ (Zn). CsGdZnSe3 and BaGdCuSe3, which are paramagnetic, obey the Curie-Weiss law and have effective magnetic moments of 7.87(6) and 7.85(5) muB for Gd(3+), in good agreement with the theoretical value of 7.94 muB. Optical transitions at 1.88 and 2.92 eV for CsGdZnSe3 and 1.96 eV for BaGdCuSe3 were deduced from diffuse reflectance spectra.     

Spectrophotometric determination of trimethoprim by oxidation in drug formulations

A spectrophotometric determination of trimethoprim is described based on the reaction of its amine group with persulfate which acts as a strong oxidizing agent in alkaline media. The reaction produces a stable yellow colored compound after heating in a boiling water bath for 30 min. At λ_max 355 nm, Beer’s law is obeyed in the concentration range 10–60 μg ml^–1 with a molar absorptivity of 2.7 × 10³ l mol^–1cm^–1. The method is applied to formulations with sulfamethoxazole. Received: 30 July 1996 / Revised: 16 October 1996 / Accepted: 22 October 1996