Preconcentrative separation of chromium(III) species from chromium(VI) by cloud point extraction and determination by flame atomic absorption spectrometry

Microchimica Acta - We describe a high-throughput technique for the determination of chromium species in water samples by flame atomic absorption spectrometry (FAAS) after preconcentrative...     

Synthesis and characterization of novel antimicrobial cationic polyelectrolytes

Cationic polyelectrolytes containing quaternary nitrogen atoms within the main chain were prepared via condensation polymerization of epichlorhydrin (ECH) with benzyl amine (BA). Polyelectrolytes having different molecular weights were obtained by varying the ECH/BA mole ratio. Cationic polymers were characterized by ¹H-NMR and gel permeation chromatography. The antimicrobial activity of the polymers was tested against bacteria, yeast, and fungi.     

Magnesium azaphthalocyanines: an emerging family of excellent red-emitting fluorophores

Magnesium(II), zinc(II), and metal-free phthalocyanines (Pcs) and azaphthalocyanines (AzaPcs) containing alkylsulfanyl, aryloxy, and dialkylamino peripheral substituents have been synthesized. The complexation of magnesium(II) by metal-free Pcs and AzaPcs has been studied in detail to determine the optimal reaction conditions necessary to ensure a complete conversion. Photophysical and photochemical measurements in tetrahydrofuran showed that magnesium(II) AzaPcs with aryloxy and alkylsulfanyl substituents have excellent fluorescent properties (Φ(F) up to 0.73) and that the corresponding zinc(II) Pcs are efficient singlet oxygen producers (Φ(Δ) up to 0.68). The presence of dialkylamino substituents causes intramolecular charge transfer within the molecule that competes with fluorescence and singlet oxygen formation. Alkylsulfanyl MgAzaPc and ZnAzaPc were the most photostable compounds among the series of studied derivatives. In addition, high molar absorption coefficients (ε ～ 300,000 M(-1) cm(-1)), absorption (λ(max) ～ 650 nm), and emission (λ(em) ～ 660 nm, high Φ(F)) in the red region suggest that these molecules are potential fluorescent probes that are superior to the commercial red cyanine dye Cy5. MgAzaPc, when incorporated into lipidic bilayers of liposomes, maintains excellent fluorescence properties (Φ(F) = 0.64). Water-soluble MgAzaPc with quaternary ammonium peripheral substituents retained a high fluorescence quantum yield even in water (Φ(F) = 0.25). The described properties show that magnesium(II) AzaPcs are excellent red-emitting fluorophores with potential applications as fluorescent probes in sensing or in vitro imaging applications.     

An X-ray and DFT Computational Study on 1-（Naphthalene-2-yl）-2-（1H-pyrazol-1-yl） ethanone O-butyl Oxime

The title compound, 1-(naphthalene-2-yl)-2-(1H-pyrazol-1-yl)ethanone O-butyl oxime, I, was synthesized. The crystal and molecular structures of I were determined by IR, 1H-NMR, mass spectrum, elemental analysis and X-ray single crystal diffraction. Molecular geometry from X-ray experiment of I in the ground state was compared using the Density Functional Theory (DFT) with B3LYP/6-311G(d,p) basis set. In addition, DFT calculation, molecular electrostatic potentials (MEP) and frontier molecular orbitals of I were performed at the B3LYP/6-311G(d,p) level of the theory.     

Biodegradation of Tetracycline Under Various Conditions and Effects on Microbial Community

Five hundred tons of antibiotics are consumed yearly in the world. In this study, the biodegradation characteristics of tetracycline (TET) under nitrate-reducing, sulfate-reducing, and methanogenic conditions were determined by batch tests. Also, effects of TET on mixed microbial cultures were revealed by microbiological analysis. In this scope, gas generation and composition, dissolved organic carbon, and electron acceptor concentrations were monitored during 120 days. Additionally, changes on quantities of specific microbial groups were determined by Q-PCR. TET showed non-biodegradable behavior under nitrate- and sulfate-reducing conditions, whereas slightly biodegradable behavior under methanogenic conditions approximately 46 % degradation. The effects of TET on the abundance of mixed culture varied according to taxonomic units. Sulfate-reducing bacteria were inhibited by TET, while archaeal, bacterial, and methanogenic populations were not affected significantly.     

苯并噻二唑与苯胺类聚合物的金属镍配合物催化法合成与表征

以1,3-二(二苯基膦)丙烷二氯化镍(Ⅱ)[Ni(dppp)Cl2]作催化剂,通过4,7-二溴-2,1,3-苯并噻二唑格氏(Grignard)试剂分别与3,3′-二甲基联苯二胺、对苯二胺共聚得到了两种新型主链含刚性和柔性链结构的苯并噻二唑类共轭聚合物。通过FT-IR、1H-NMR、UV-Vis、XRD、TGA等测试手段对聚合物的化学结构和性能进行了表征。结果表明:聚合物的紫外-可见最大吸收波长分别在306 nm和380 nm处出现,荧光激发峰分别出现在378 nm和463 nm,相应的荧光发射峰分别在493、562 nm处出现。共轭聚合物具有一定的结晶性和热稳定性。     

EPR and optical studies of vanadium doped potassium dihydrogen citrate (C6H7KO7) single crystal

An EPR and optical studies of VO2+ doped potassium dihydrogen citrate (PDHC) single crystals have been carried out at room temperature. It crystallizes in triclinic symmetry with the unit cell dimensions: a=11.343?, b=13.078?, c=6.272?, α=89.79°, β=94.36°, γ=104.2°. The angular variation of EPR spectra have shown that two different VO2+ complexes are located in different chemical environments and each environment contains one magnetically VO2+ site occupying substitutional position in the lattice and show very high angular dependence.     

Fouling behavior of microstructured hollow fiber membranes in dead-end filtrations: critical flux determination and NMR imaging of particle deposition

The fouling behavior of microstructured hollow fibers was investigated in constant flux filtrations of colloidal silica and sodium alginate. It was observed that the fouling resistance increases faster with structured fibers than with round fibers. Reversibility of structured fibers' fouling was similar during silica filtrations and better in sodium alginate filtrations when compared with round fibers. The deposition of two different silica sols on the membranes was observed by NMR imaging. The sols had different particle size and solution ionic strength and showed different deposition behaviors. For the smaller particle-sized sol in deionized solution (Ludox-TMA), there was more deposition within the grooves of the structured fibers and much less on the fins. For the alkali-stabilized sol Bindzil 9950, which had larger particles, the deposition was homogeneous across the surface of the structured fiber, and the thickness of the deposit was similar to that on the round fiber. This difference between the deposition behavior of the two sols is explained by differences in the back diffusion, which creates concentration polarization layers with different resistances. The Ludox sol formed a thick polarization layer with very low resistance. The Bindzil sol formed a slightly thinner polarization layer; however, its resistance was much higher, of similar magnitude as the intrinsic membrane resistance. This high resistance of the polarization layer during the Bindzil sol filtration is considered to lead to quick flow regulation toward equalizing the resistance along the fiber surface. The Ludox particles were trapped at the bottom of the grooves as a result of reduced back diffusion. The fouling behavior in sodium alginate filtrations was explained by considering the size-dependent deposition within the broad alginate size distribution. The better reversibility of fouling in the structured fibers is thought to be the result of a looser deposit within the grooves, which is more easily removed than a compressed deposit on the round fibers.     

An experimental and kinetic modeling study on the oxidation of 1,3-dioxolane

The modern catalytic or enzymatic advances allow the production of novel biofuel. Among them, 1,3-dioxolane can be produced from formaldehyde and ethylene glycol, both can be obtained from biomass. In this study, the oxidation of 1,3-dioxolane is studied at stoichiometric conditions. The ignition delay times of 1,3-dioxolane/O₂/inert mixtures were measured in a shock tube and in a rapid compression machine at pressures of 20 to 40 bar and temperatures ranging from 630 to 1300 K. The pressure profiles recorded in the rapid compression machine show a first stage of ignition enlightening the influence of the low temperature chemistry of combustion. Furthermore, mole fraction profiles of the stable intermediates produced during the oxidation of 1,3-dioxolane were measured in a jet-stirred reactor at 10 bar. Following these observations, a detailed kinetic model was developed with reaction rate coefficients and thermochemical data calculated by theoretical calculations or estimated by analogies to suitable molecules. In order to get an insight into the most important reaction pathways brute force sensitivity analysis and reaction pathway analysis were performed with the proposed model and discussed. It became clear that in the fuel-in-air case for the alkylhydroperoxide of 1,3-dioxolane the ring opening beta-scission pathway is favored against the further alkane-like second addition to molecular oxygen, which leads to a limited negative temperature coefficient.