Novel monofunctional and bifunctional boronic acid‐functionalized squarylium dyes as precolumn and on‐column labels for protein analysis by capillary electrophoresis with laser‐induced fluorescence

This article presents a continuous capillary electrophoresis with laser‐induced fluorescence (CE‐LIF) following spectral studies of the noncovalent interactions between novel Squarylium Boronic Acid 4 (SQ‐BA4) & Squarylium Diboronic Acid 2 (SQ‐DBA2) squarylium dyes and human serum albumin (HSA). Two protocols were used wherein the on‐column‐labeling protocol was found to be more sensitive than the precolumn one by showing a better enhancement in the peak area of the HSA–dye complex besides lower limits of detection (LODs) for HSA. Also, stability studies were conducted with or without HSA using precolumn‐labeling mode over one week exhibiting the superiority of SQ‐BA4 to SQ‐DBA2. Then, a mixture containing three model proteins, HSA, β‐lactoglobulin B, and transferrin, was labeled on‐column with both dyes and completely resolved by CE‐LIF after optimization of several parameters. Both dyes provided lower LODs for HSA than those of β‐lactoglobulin B and transferrin with higher sensitivities. In addition, the SQ‐BA4 dye showed again greater sensitivities with all the three proteins than SQ‐DBA2.     

KF/clinoptilolite nanoparticles as a novel catalyst for the green synthesis of chromens using three component reactions of 4‐hydroxycoumarins: Study of antioxidant activity

In this research, the green synthesis of chromen derivatives in good yields is described via three‐component reactions of 4‐hydroxycumarine, aldehydes or ketones, and methyl ketones in the presence of KF/clinoptilolite nanoparticles (KF/CP‐NPs) under solvent‐free conditions at 50°C in low time. The present methodology suggests some advantages such as low reaction time, easy and simple procedure, green method, inexpensive catalyst, high yield of product, and existence of different substrates for performing these reactions. In addition, it should be mentioned that antioxidant activity was studied for some prepared compounds, such as 4a–4d, by DPPH radical trapping and reducing potential tests of ferric ion and then comparing results with TBHQ and BHT as synthetic antioxidants. In this study, compounds 4c was shown to have moderate DPPH radical trapping, and compounds 4b and 4d displayed good reducing power of ferric ion.     

Characterization and catalytic performance of basaltic dust as an efficient catalyst in the liquid‐phase esterification of acetic acid with n‐butanol

Three natural basaltic samples were collected and used as efficient catalysts for the liquid‐phase synthesis of n‐butyl acetate. The samples were characterized by X‐ray fluorescence analysis (XRF), X‐ray diffraction (XRD), thermogravimetry (TG), differential thermal analysis (DTA), Fourier transform infrared (FT‐IR), scanning electron microscopy (SEM), and N₂ sorption. The acidity of the samples was determined using isopropanol dehydration, and the strength of the acid sites was measured using chemisorption of basic probes. The catalytic activity of the samples towards the esterification of acetic acid with n‐butanol was extensively examined. The influence of different parameters, such as the reaction refluxing time, molar ratio, catalyst loading, reusability, and calcination temperature, on the esterification reaction was studied in detail. The results revealed that all samples had high catalytic activity with a selectivity of 100% to n‐butyl acetate formation. In addition, the sample obtained from the top hill of Volcano had the highest activity with a 80% yield of n‐butyl acetate. Moreover, the significant catalytic performances were well correlated with the acidity of the samples and to the reaction rate constants.     

Guest Exchange Mechanisms in Mono‐Metallic PdII/PtII‐Cages Based on a Tetra‐Pyridyl Calix[4]pyrrole Ligand

Planar pyridyl N‐oxides are encapsulated in mono‐metallic Pd^II/Pt^II‐cages based on a tetra‐pyridyl calix[4]pyrrole ligand. The exchange dynamics of the cage complexes are slow on both the NMR chemical shift and EXSY timescales, but encapsulation of the guests by the cages is fast on the human timescale. A “French doors” mechanism, involving the rotation of the meso‐phenyl walls of the cages, allows the passage of the planar guests. The encapsulation of quinuclidine N‐oxide, a sterically more demanding guest, is slower than pyridyl N‐oxides in the Pd^II‐cage, and does not take place in the Pt^II counterpart. A modification of the encapsulation mechanism for the quinuclidine N‐oxide is postulated that requires the partial dissociation of the Pd^II‐cage. The substrate binding selectivity featured by the cages is related to their different guest uptake/release mechanisms.     

Nanoporous Gold Embedded ZIF Composite for Enhanced Electrochemical Nitrogen Fixation

The electrochemical nitrogen reduction reaction (NRR) offers an energy‐saving and environmentally friendly approach to produce ammonia under ambient conditions. However, traditional catalysts have extremely poor NRR performances because of their low activity and the competitive hydrogen evolution reaction. The high catalytic activity of nanoporous gold (NPG) and the hydrophobicity and molecular concentrating effect of the zeolitic imidazolate framework‐8 (ZIF‐8) were incorporated in the NPG@ZIF‐8 nanocomposite so that the ZIF‐8 shell could weaken hydrogen evolution and retard reactant diffusion. A highest Faradaic efficiency of 44 % and an excellent rate of ammonia production of (28.7±0.9) μg h^?1 cm^?2 were achieved, which are superior to traditional gold nanoparticles and NPG. Moreover, the composite catalyst shows high electrochemical stability and selectivity (98 %). The superior NRR performance makes NPG@ZIF‐8 one of the most promising water‐based NRR electrocatalysts for ammonia production.     

Pt Nanoparticle‐modified Carbon Fiber Microelectrode for Selective Electrochemical Sensing of Hydrogen Peroxide

We report a simple approach to the production of carbon fiber‐based amperometric microbiosensors for selective detection of hydrogen peroxide (H₂O₂), which was achieved by electrometallization of carbon fiber microelectrodes (CFMs) by electrodeposition of Pt nanoparticles. The Pt‐carbon hybrid sensing interface provided a sensitivity of 7711±587 μA ? mM^?1 ? cm^?2, a detection limit of 0.53±0.16 μM (S/N=3), a linear range of 0.8 μM–8.6 mM, and a response time of <2 sec. The morphologies of the Pt nanoparticle‐modified CFMs were characterized by scanning electron microscopy. To achieve selectivity, permseletive layers, polyphenylenediamine (PPD) and Nafion, were deposited resulting in exclusion of the anionic and cationic interferents, ascorbic acid and dopamine, respectively, at their physiologically relevant concentrations. The resultant sensors displayed a sensitivity to hydrogen peroxide of 1381±72 μA ? mM^?1 ? cm^?2, and a detection limit of 0.86±0.19 μM (S/N=3). This simple and rapid metallization method converts carbon fiber microelectrodes, which are readily accessible, to microscale Pt electrodes in 2 min, providing a platform for oxidase‐based amperometric biosensors with improved spatial resolution over more commonly used platinum electrode array microprobes.     

Steigerung der Wasseroxidation durch In‐situ‐Elektrokonversion eines Mangangallids: Ein intermetallischer Vorläuferansatz

Erstmals wurden, in einen intermetallischen Vorläuferansatz, durch In‐situ‐Elektrokonversion von Mangangallid (MnGa₄) hochleistungsfähige und langzeitstabile MnO_x‐basierte Elektrokatalysatoren für die Wasseroxidation in alkalischem Medium hergestellt. Überraschend führt seine Elektrokorrosion, unter gleichzeitigem Verlust von Ga, gleichzeitig zu drei kristallinen Typen von MnO_x‐Mineralien mit verschiedenen Strukturen und induzierten Defekten: Birnessit δ‐MnO₂, Feitknechtit β‐MnOOH und Hausmannit α‐Mn₃O₄. Das Vorkommen und die intrinsische Stabilität von aktiven Mn^III/Mn^IV‐Zentren in den drei gebildeten MnO_x‐Phasen erklärt die hervorragende Effizienz und Stabilität des Systems für die elektrokatalytische Wasseroxidation. Nach der elektrophoretischen Abscheidung des MnGa₄‐Vorläufers auf elektrisch leitfähigem Nickelschaum wurde ein niedriges Überpotential von 291 mV bei der Stromdichte von 10 mA cm^?2 erreicht, das praktisch den Überpotentialen von edelmetallbasierten Katalysatoren entspricht und für mehr als fünf Tage beständig ist.     

Consecutive Intermolecular Reductive Amination/Asymmetric Hydrogenation: Facile Access to Sterically Tunable Chiral Vicinal Diamines and N‐Heterocyclic Carbenes

A highly enantioselective iridium‐ or ruthenium‐catalyzed intermolecular reductive amination/asymmetric hydrogenation relay with 2‐quinoline aldehydes and aromatic amines has been developed. A broad range of sterically tunable chiral N,N′‐diaryl vicinal diamines were obtained in high yields (up to 95 %) with excellent enantioselectivity (up to >99 % ee). The resulting chiral diamines could be readily transformed into sterically hindered chiral N‐heterocyclic carbene (NHC) precursors, which are otherwise difficult to access. The usefulness of this synthetic approach was further demonstrated by the successful application of one of the chiral vicinal diamines and chiral NHC ligands in a transition‐metal‐catalyzed asymmetric Suzuki–Miyaura cross‐coupling reaction and asymmetric ring‐opening cross‐metathesis, respectively.     

Solvent‐Induced Cluster‐to‐Cluster Transformation of Homoleptic Gold(I) Thiolates between Catenane and Ring‐in‐Ring Structures

Supramolecular ensembles adopting ring‐in‐ring structures are less developed compared with catenanes featuring interlocked rings. While catenanes with inter‐ring closed‐shell metallophilic interactions, such as d¹⁰–d¹⁰ Au^I–Au^I interactions, have been well‐documented, the ring‐in‐ring complexes featuring such metallophilic interactions remain underdeveloped. Herein is described an unprecedented ring‐in‐ring structure of a Au^I‐thiolate Au₁₂ cluster formed by recrystallization of a Au^I‐thiolate Au₁₀ [2]catenane from alkane solvents such as hexane, with use of a bulky dibutylfluorene‐2‐thiolate ligand. The ring‐in‐ring Au^I‐thiolate Au₁₂ cluster features inter‐ring Au^I–Au^I interactions and underwent cluster core change to form the thermodynamically more stable Au₁₀ [2]catenane structure upon dissolving in, or recrystallization from, other solvents such as CH₂Cl₂, CHCl₃, and CH₂Cl₂/MeCN. The cluster‐to‐cluster transformation process was monitored by ¹H NMR and ESI‐MS measurements. Density functional theory (DFT) calculations were performed to provide insight into the mechanism of the “ring‐in‐ring? [2]catenane” interconversions.     

Effectively controlled microfluidic trap for spatiotemporal analysis of the electrotaxis of Caenorhabditis elegans

C. elegans is a popular model organism with a well‐developed neural network. Approximately 60% of the genes in C. elegans have genomic counterparts in humans, including those involved in building neural circuits. Therefore, we can extend the study of human neural network mechanisms to C. elegans which is easy to genetically manipulate. C. elegans shows behavioural responses to various external physical and chemical stimuli. Electrotaxis is one of its distinct behavioural responses, which is defined as movement towards the cathode in an electric field. In this study, we developed an effective microfluidic trap system for analysing electrotaxis in C. elegans. In addition, two mutant strains (unc‐54(s74) and unc‐6(e78)) from wild‐type (N2) worms were screened using the system. Wild‐type (N2) worms and the two mutant strains clearly showed different behavioural responses to the applied electric field, thus enabling the effective screening of the mutant worms from the wild type (N2). This microfluidic system can be utilized as a platform for the study of behavioural responses, and for the sorting and mutant screening of C. elegans.