Particle sizing of colloidal suspensions by low-coherence fiber optic dynamic light scattering

A low-coherence fiber optic dynamic light scattering technique is used to measure the particle size distributions of colloidal suspensions with different volume fractions. We detect electric field autocorrelation function of the singly backscattered light from a sample and use the CONTIN algorithm to obtain the particle size distributions. As a result, in the range of volume fractions from 0.01 to 0.10 of monodispersive colloidal suspensions, the mean particle size with the deviation within 4% and the polydispersity approximate 5% can be determined for particles of different radii. The results demonstrate that the low-coherence fiber optic dynamic light scattering technique is effective in measuring particle size of colloidal suspensions.     

Zr（Ⅳ）／PVA功能膜的膜催化酯化反应研究

在催化与渗透汽化分离技术相偶合的渗透汽化型膜反应器中，研究了羧酸酯的液相合成反应．实验中制备了两类具有强酸催化活性的ｚｒ（Ⅳ）／ＰＶＡ（聚乙烯醇）功能膜，采用管式膜方式，以乙酸正丁酯的合成反应为探针，对这类新型的催化反应技术在催化活性、分离性能以及分离对反应转化的影响等方面进行了探索性研究。从得到的结果看，膜催化酯化反应过程的反应条件和缓，转化率可达到９８％，反应的选择性为１００％．     

Biotransformation of salvianolic acid B by Fusarium oxysporum f. sp. Cucumerinum and its two degradation routes

Resting cells of Fusarium oxysporum f. sp. Cucumerinum (F. oxsporum) were used for the biotransformation of salvianolic acid B (Sal B). Three transformed products, isolithospermic acid, prolithospermic acid and danshensu, were identified on the basis of chemical and spectroscopic data. The stability of the two ester bonds of Sal B was studied and two degradation routes were found. In the biotransformation system, Sal B was transformed into isolithospermic acid first which was then converted into prolithospermic acid. In alkaline solutions, Sal B was transformed into lithospermic acid first which was then converted into prolithospermic acid. This is the first reports of the NMR spectra of isolithospermic acid and this result may indicate the metabolic pathways of Sal B in vivo.     

The Jahn-Teller effect in CH3Cl+(X̃2E): a combined high-resolution experimental measurement and ab initio theoretical study

The energy levels of CH(3)Cl(+)X?(2)E showing strong spin-vibronic coupling effect (Jahn-Teller effect) have been measured up to 3500 cm(-1) above the ground vibrational state using one-photon zero-kinetic energy photoelectron and mass-analyzed threshold ionization spectroscopic method. Theoretical calculations have been also performed to calculate the spin-vibronic energy levels using a diabatic model and ab initio adiabatic potential energy surfaces (PESs). In the theoretical calculations the diabatic potential energy surfaces are expanded by the Taylor expansions up to the fourth-order including the multimode vibronic interactions. The calculated spin-orbit energy splitting (224.6 cm(-1)) for the ground vibrational state is in good agreement with the experimental data (219 ± 3 cm(-1)), which indicates that the Jahn-Teller and the spin-orbit coupling have been properly described in the theoretical model near the zero-point energy level. Based on the assignments predicted by the theoretical calculations, the experimentally measured energy levels were fitted to those from the diabatic model by optimizing the main spectroscopic parameters. The PESs from the ab initio calculations at the level of CASPT2/vq(t)z were thus compared with those calculated from the experimentally determined spectroscopic parameters. The theoretical diagonal elements in the diabatic potential matrix are in good agreement with those determined using the experimental data, however, the theoretical off-diagonal elements appreciably deviate from those determined using the experimental data for geometric points far away from the conical intersections. It is also concluded that the JT effect in CH(3)Cl(+) mainly arises from the linear coupling and the mode coupling between the CH(3) deform (υ(5)) and CH(3) rock (υ(6)) vibrations. The mode couplings between the symmetric C-Cl stretching vibration υ(3) with υ(5) and υ(6) are also important to understand the spin-vibronic structure of the molecule.     

A selective fluorescent turn-on NIR probe for cysteine

A selective and sensitive turn-on fluorescent NIR probe for cysteine has been developed. Cleavage of 2,4-dinitrobenzenesulfonyl (DNBS) with thiols switches the weakly fluorescent aza-BODIPY dye (λ(em) = 734 nm, Φ(f) = 0.03) to a strongly fluorescent species in the NIR region (λ(em) = 755 nm, Φ(f) = 0.14).     

Improved self-consistent and resolution-of-identity approximated Becke'05 density functional model of nondynamic electron correlation

In a recent letter [E. Proynov, Y. Shao, and J. Kong, Chem. Phys. Lett. 493, 381 (2010)], Becke's B05 model of nondynamic electron correlation in density functional theory was implemented self-consistently with computational efficiency (the "SCF-RI-B05" scheme). Important modifications of the algorithm were done in order to make the self-consistency feasible. In the present work, we give a complete account of the SCF-RI-B05 algorithm, including all the formulae for the analytical representation of the B05 functional and for its self-consistent field (SCF) potential. The average performance of the SCF-RI-B05 method reported in the above letter was somewhat less accurate, compared to the original B05 implementation, mainly because the parameters of the original B05 model were optimized with post-local-spin-density calculations. In this work, we report improved atomization energies with SCF-RI-B05, based on a SCF re-optimization of its four linear parameters. The re-optimized SCF-RI-B05 scheme is validated also on reaction barriers, and on the subtle energetics of NO dimer, an exemplary system of strong nondynamic correlation. It yields both the binding energy and the singlet-triplet splitting of the NO dimer correctly, and close to the benchmarks reported in the literature.     

A new organic-inorganic hybrid based on the crescent-shaped polyoxoanion [H6SiNb18O54]8- and copper-organic cations

A new organic-inorganic hybrid, [Cu(en)(2)](3){[Cu(en)(2)][H(6)SiNb(18)O(54)]}·22H(2)O (1, en = ethylenediamine) containing the crescent-shaped polyoxoanion [H(6)SiNb(18)O(54)](8-) and copper-organic cations has been successfully synthesized, and elemental analyses, IR spectra, thermogravimetric analyses and single-crystal X-ray diffraction were investigated.     

Organelle-specific detection of phosphatase activities with two-photon fluorogenic probes in cells and tissues

Two-photon fluorescence microscopy (TPFM) provides key advantages over conventional fluorescence imaging techniques, namely, increased penetration depth, lower tissue autofluorescence and self-absorption, and reduced photodamage and photobleaching and therefore is particularly useful for imaging deep tissues and animals. Enzyme-detecting, small molecule probes provide powerful alternatives over conventional fluorescent protein (FP)-based methods in bioimaging, primarily due to their favorable photophysical properties, cell permeability, and chemical tractability. In this article, we report the first fluorogenic, small molecule reporter system (Y2/Y1) capable of imaging endogenous phosphatase activities in both live mammalian cells and Drosophila brains. The one- and two-photon excited photophysical properties of the system were thoroughly investigated, thus confirming the system was indeed a suitable Turn-ON fluorescence pair for TPFM. To our knowledge, this is the first enzyme reporting two-photon fluorescence bioimaging system which was designed exclusively from a centrosymmetric dye possessing desirable two-photon properties. By conjugation of our reporter system to different cell-penetrating peptides (CPPs), we were able to achieve organelle- and tumor cell-specific imaging of phosphatase activities with good spatial and temporal resolution. The diffusion problem typically associated with most small molecule imaging probes was effectively abrogated. We further demonstrated this novel two-photon system could be used for imaging endogenous phosphatase activities in Drosophila brains with a detection depth of >100 μm.     

Synthesis of hydrothermally stable and long-range ordered Ce-MCM-48 and Fe-MCM-48 materials

The hydrothermally stable and long-range ordered Ce-MCM-48 and Fe-MCM-48 were conveniently synthesized at 393 K for 24 h by directly adding fluoride ions to the initial gel without posttreatment and pH adjustment. The Ce-MCM-48 with a Si/Ce of 200 and 100, which were prepared by directly adding fluoride ions, could still maintain their mesoporous structures after refluxing in boiling water for 3 days. The incorporation of Ce into MCM-48 could enhance the hydrothermal stability of MCM-48 in the absence of fluoride ions; however, the incorporation of Fe into MCM-48 materials barely improved the hydrothermal stability of MCM-48 materials. The effect of adding NaF was much more efficient in enhancement of hydrothermal stability than that of the incorporation of Ce. The addition of fluoride ions mainly improves the degree of polymerization of silicates. The Ce(4+) ions in Ce-MCM-48 appear to be present partly in tetrahedral coordination in the framework and partly as CeO(2) particles on the surface of framework. The Ce positioned on the surface of pore walls and in the framework both provide the protection against water attack.     

Facile synthesis of gemini surface-active ATRP initiator and its use in soap-free AGET ATRP mini-emulsion polymerisation

A novel cationic gemini surfactant has been readily synthesised in 70 % total yield. The functional gemini surfactant can act both as an emulsifier and an atom transfer radical polymerisation (ATRP) initiator in mini-emulsion polymerisation of methyl methacrylate (MMA), in which no other emulsifier was required. 1-(Dimethylamino)dodecane (N,N-dimethyldodecylamine, DMDA) was found to be a good ligand in the activator generated by electron transfer (AGET) ATRP reaction. Kinetic studies indicated that the polymerisation featured controlled/living radical polymerisation.