Stepwise addition of CuBr at [(dtc)2Mo2(S)2(μ-S)2] (dtc=diethyldithiocarbamate): syntheses and crystal structures of two Mo/Cu/S clusters [(dtc)2Mo2(μ3-S)(μ-S)3(CuBr)] and [(dtc)2Mo2(μ3-S)4(CuBr)2]

Reactions of [(dtc)₂Mo₂(S)₂(μ-S)₂] with one or two equivalents of CuBr in CH₂Cl₂ afforded two new heterobimetallic sulfide clusters, [(dtc)₂Mo₂(μ₃-S)(μ-S)₃(CuBr)] (1) and [(dtc)₂Mo₂(μ₃-S)₄(CuBr)₂] (2). Both compounds were characterized by elemental analysis, IR, UV-vis and X-ray analysis. Compound 1 contains a butterfly-shaped Mo₂S₄Cu core in which one CuBr unit is coordinated by one bridging S and two terminal S atoms of the [(dtc)₂Mo₂(S)₂(μ-S)₂] moiety. In the structure of 2, one [(dtc)₂Mo₂(S)₂(μ-S)₂] moiety and two CuBr units are held together by six Cu-μ₃-S bonds, forming a cubane-like Mo₂S₄Cu₂ core.     

On‐Line Determination of Arsenic Species in Sea Water by Selective Hydride Generation Coupled with Inductively Coupled Plasma — Mass Spectrometry

A method for direct de termination of total in organic arsenic (III+V), arsenic (III) and dimethylarsinate (DMA) in sea water was developed by combining continuous‐flow selective hydride generation and inductively coupled plasma mass spectrometry (ICP‐MS) is presented. The principle underlying selective hydride generation is based on proper control of the reaction conditions for achieving separation of the respective arsenic species. The effects of pH and composition of reaction media on mutual interference between the arsenic species were investigated in detail. The results indicate that the appropriate media for the selective determination of total in organic arsenic, DMA and As(III) are 6 M HNO₃, acetate buffer at pH = 4.63 and citrate buffer at pH = 6.54, respectively. The concentrations of total inorganic arsenic species, As(III+V), and As(III) were respectively deter mined and that of As(V) was obtained by the difference between them. As to the concentration of DMA, it was obtained after correction from the interference caused by As(III) and As(V). By following the established procedure, the detection lim its (as based on 3‐sigma criterion) for As(III+V), As(III) and DMA were 0.050, 0.009, and 0.002 ng/mL, respectively. There liability of the pro posed method was evaluated in terms of precision and spike addition. The results indicated that the precision of better than 3% and spike recovery of 95 to 105% for all the arsenic species tested in the natural sea water samples can be obtained.     

Evaluation of minimum detectable amounts of iodine in biological samples by neutron activation analysis

Evaluation of minimal detectable amounts (MDA) of iodine in various or specified irradiation and measurement conditions is described. Interfering contributions due to Na and Cl to the spectral background as well as the dead time of detection system were calculated in details based on an experimental approach. The MDA of iodine for some important biological samples with various Na and Cl concentrations can be evaluated and predicted according to the specified irradiation and measurement arrangements to meet the requirement of analytical purposes.     

Hybridized local and charge-transfer excited state fluorophores enabling organic light-emitting diodes with record high efficiencies close to 20%

Pure organic emitters with full utilization of triplet excitons are in high demand for organic light-emitting diodes (OLEDs). Herein, through modulation of electron donors and introduction of phenyl rings as π spacers, we present three pure organic fluorophores (BCz, BTCz and BPTCz) with the hybridized local and charge-transfer (HLCT) excited state feature for OLED fabrication. Importantly, the introduction of π spacers in BPTCz not only enhances locally excited character with a fast radiative decay but also promotes intermolecular interactions to suppress non-radiative decays, contributing to a high solid-state fluorescence efficiency over 90%. Significantly, BPTCz not only endows its doped OLEDs with an external quantum efficiency (EQE) up to 19.5%, but also its non-doped OLED with a high EQE of 17.8%, and these outstanding efficiencies are the state-of-the-art performances of HLCT-based OLEDs.

Three purely organic fluorophores with a hybridized local and charge-transfer excited state feature are presented and enabled organic light-emitting diodes with record high external quantum efficiencies close to 20%.     

Resistance properties of a macroporous silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide-impregnated polymeric adsorption material against nitric acid, temperature and γ-irradiation

The resistance of a novel silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide (TODGA) polymeric adsorption material (TODGA/SiO₂-P) against nitric acid, temperature and γ-irradiation had been investigated. The adsorption property of the treated TODGA/SiO₂-P was evaluated by a 3 M HNO₃ solution containing 0.01 M Nd(III). It was found that both 3 and 0.01 M HNO₃ concentrations did not decrease the stability of TODGA/SiO₂-P at 25°C. The quantity of TODGA leaked from TODGA/SiO₂-P was equivalent to its solubility in the corresponding HNO₃ aqueous solution. The effect of 3 M HNO₃ on the leakage of TODGA at 80°C was significantly higher than that in 0.01 M HNO₃ as well as in all cases at 25°C. The amount of Nd(III) adsorbed towards the treated TODGA/SiO₂-P was determined in the range of 0.143–0.148 mmol/g for the HNO₃ concentration effect and 0.142–0.0506 mmol/g for the temperature effect. γ-Irradiation showed a more noticeable destruction effect on TODGA/SiO₂-P. The content of TODGA leaked increased with an increase in the γ-irradiation dose (ID) from 1.06 to 3.72 MGy in terms of the linear equation [TODGA]=794.5ID+84.0. The amount of Nd(III) adsorbed onto the irradiated TODGA/SiO₂-P decreased rapidly from 0.134 to 0.0438 mmol/g, which was lower than 0.153 mmol/g, the adsorption of fresh TODGA/SiO₂-P for Nd(III), according to the equation Q_Nd(III)=−0.0301ID+0.160, showing that a large quantity of TODGA leaked from TODGA/SiO₂-P. The adsorbed amount of Nd(III) decreased obviously in this order: the HNO₃ concentration effect, temperature effect and γ-irradiation.     

PhI(OAc)2-mediated additions of 2,4-dinitrophenylsulfenamide with methylenecyclopropanes (MCPs) and a methylenecyclobutane (MCB)

We report herein stereoselective additions of a nitrene derived from PhI(OAc)₂ and 2,4-dinitrophenylsulfenamide with methylenecyclopropanes (MCPs) and a methylenecyclobutane (MCB) to give the corresponding ring enlargement products, (cyclobutylidene)amide or (cyclopentylidene)amide derivatives, in moderate to excellent yields. The reaction mechanism has been discussed on the basis of control experiments and previous investigation.     

Dysfunction of Shh signaling activates autophagy to inhibit trophoblast motility in recurrent miscarriage

In early pregnancy, the placenta anchors the conceptus and supports embryonic development and survival. This study aimed to investigate the underlying functions of Shh signaling in recurrent miscarriage (RM), a serious disorder of pregnancy. In the present study, Shh and Gli2 were mainly observed in cytotrophoblasts (CTBs), Ptch was mainly observed in syncytiotrophoblasts (STBs), and Smo and Gli3 were expressed in both CTBs and STBs. Shh signaling was significantly impaired in human placenta tissue from recurrent miscarriage patients compared to that of gestational age-matched normal controls. VEGF-A and CD31 protein levels were also significantly decreased in recurrent miscarriage patients. Furthermore, inhibition of Shh signaling impaired the motility of JAR cells by regulating the expression of Gli2 and Gli3. Intriguingly, inhibition of Shh signaling also triggered autophagy and autolysosome accumulation. Additionally, knockdown of BECN1 reversed Gant61-induced motility inhibition. In conclusion, our results showed that dysfunction of Shh signaling activated autophagy to inhibit trophoblast motility, which suggests the Shh pathway and autophagy as potential targets for RM therapy.Subject terms: Embryology, Endocrine reproductive disorders, Autophagosomes     

Heterometallic MIIRuIII2 compounds constructed from trans-[Ru(Salen)(CN)2]- and trans-[Ru(Acac)2(CN)2]-. Synthesis, structures, magnetic properties, and density functional theoretical study

The synthesis, structures, and magnetic properties of four cyano-bridged M(II)Ru(III)2 compounds prepared from the paramagnetic Ru(III) building blocks, trans-[Ru(salen)(CN)2]- 1 [H2salen = N,N'-ethylenebis(salicylideneimine)] and trans-[Ru(acac)2(CN)2]- (Hacac = acetylacetone), are described. Compound 2, {Mn(CH3OH)4[Ru(salen)(CN)2]2}.6CH3OH.2H2O, is a trinuclear complex that exhibits antiferromagnetic coupling between Mn(II) and Ru(III) centers. Compound 3, {Mn(H2O)2[Ru(salen)(CN)2]2.H2O}n, has a 2-D sheetlike structure that exhibits antiferromagnetic coupling between Mn and Ru, leading to ferrimagnetic-like behavior. Compound 4, {Ni(cyclam)[Ru(acac)2(CN)2]2}.2CH3OH.2H2O (cyclam = 1,4,8,11-tetraazacyclotetradecane), is a trinuclear complex that exhibits ferromagnetic coupling. Compound 5, {Co[Ru(acac)2(CN)2]2}n, has a 3-D diamond-like interpenetrating network that exhibits ferromagnetic ordering below 4.6 K. The density functional theory (DFT) method was used to calculate the molecular magnetic orbitals and the magnetic exchange interaction between Ru(III) and M(II) (Mn(II), Ni(II)) ions.     

Effect of concentration on surfactant micelle shapes —A molecular dynamics study

Many aspects of the behavior of surfactants have not been well understood due to the coupling of many different mechanisms. Computer simulation is, therefore, attractive in the sense that it can explore the effect of different mechanisms separately. In this paper, the shapes, structures and sizes of sodium dodecylbenzenesulfonate (SDBS) micelles under different concentrations in an oil/water mixture were studied via molecular dynamics (MD) simulations using a simplified atomistic model which basically maintains the hydrophile and lipophile properties of the surfactant molecules. Above the critical micellar concentration (cmc), surfactant molecules aggregate spontaneously to form a wide variety of assemblies, from spherical to rodlike, wormlike and bilayer micelles. Changes in their ratios of the principle moments of inertia (g₁/g₃, g₂/g₃) indicated the transition of micelle shapes at different concentrations. The aggregation number of micelle is found to have a power-law dependence on surfactant concentration.     

Studies of structural reorganization in Nylon 1010 during heating scanning

The process of structural reorganization and thermal history recurrence in Nylon 1010 were studied by using DSC through different heat treatments. The characteristics of both endothermic and exothermic peaks on DSC curve is explained reasonably. The viewpoint is advanced that crystallites assembly is characterized by premelting crystallisation peak. The temperature range sensitive to the crystal perfection is determined. The results provide theoretical basis for the processing and application of Nylon 1010.

---

Zusammenfassung Mittels DSC bei verschiedenen Wärmebehandlungen wurde der Vorgang der strukturellen Rückordnung und das thermische Vorleben von Nylon 1010 untersucht. Sowohl exotherme als auch endotherme Peaks an der DSC-Kurve konnten plausibel erklärt werden. Das Kristallitgefüge wird durch einen Premelting Kristallisationspeak bestimmt. Der für die Kristallvollkommenheit ausschlaggebende Temperaturbereich wurde bestimmt. Die Ergebnisse liefern eine theoretische Grundlage für den Umgang und die Anwendungen von Nylon 1010.