Theoretical study of the local structure and Raman spectra of CaO-SiO2 binary melts

A procedure for the Raman spectra calculation of vitreous and molten silicates was presented in this paper. It includes molecular dynamics MD simulation for the generation of equilibrium configurations, Wilson's GF matrix method for the calculations of eigenfrequencies and corresponding vectors, electro-optical parameters method (EOPM) for the Raman intensity calculations, and the bond polarizability model (BPM) for the determination of polarizability and polarizability derivative. One of the most important characteristics of this procedure is the achievement of the partial Raman spectra of five tetrahedral units, as well as the total spectral envelope. In this paper, the calculation was carried out for the vitreous and molten calcium silicates with different compositions and at various temperatures. It is worthwhile to note that the calculation is based on statistical configurations distribution in the space and so it is not needed to artificially adjust the full width at half maximum (FWHM) of spectra. It was also tested through the good agreement of the calculated spectra with the experimental, including some regularity of spectral properties. According to the calculation, the symmetrical stretching of whole tetrahedral units, to which the stretching of Si-O(nb) bond gives the main contribution to intensity, is proven to be the dominance in the high-frequency range (800-1200 cm(-1)) and the symmetrical bending of Si-O(b)-Si, to which the stretching of Si-O(b) bond exhibits the main contribution, is the dominance in the medium-frequency range (400-700 cm(-1)). As the first theoretical results, the Raman scattering coefficient of each Q(i) was found little change along with the variation of composition and temperature.     

Effect of amphiphilic molecules upon chromatic transitions of polydiacetylene vesicles in aqueous solutions

Effect of amphiphilic molecules upon the chromatic transitions of polymerized 10,12-pentacosadiynoic acid (PCDA) vesicles in aqueous solutions was reported. The colorimetric response of polymerized PCDA vesicles for 1-pentanol is higher than that for ethanol due to more hydrophobic property of 1-pentanol. The colorimetric response of polymerized PCDA vesicles for sodium dodecyl sulfate (SDS) and Triton X-100 is lower than that for cetyltrimethylammonium bromide (CTAB). The strong ability of CTAB to induce chromatic transition of the vesicles is related to the positively charged headgroups of CTAB, which favors approach of CTAB to the negatively charged carboxylate groups at the vesicle surface. The insertion of alkyl chain of CTAB into the hydrophobic domain perturbs the conformation of the conjugated polymer backbone and induces color change of polydiacetylene vesicles. For a series of alkylamine hydrochloric salts, the longer the alkyl chain, the stronger the ability of alkylamine to induce chromatic transition of polydiacetylene vesicles.     

Large-scale fabrication of wafer-size colloidal crystals, macroporous polymers and nanocomposites by spin-coating

This paper reports a simple spin-coating technique for rapidly fabricating three types of technologically important materials--colloidal crystal, macroporous polymer, and polymeric nanocomposite, each with high crystalline qualities and wafer-scale sizes. Dispersion of monodisperse silica colloids in triacrylate monomers is spin-coated onto a variety of substrates. Shear-induced ordering and subsequent polymerization lead to the formation of three-dimensionally (3D) ordered colloidal crystals trapped inside a polymer matrix. The thickness of as-synthesized colloidal crystal-polymer nanocomposite is highly uniform and can be controlled simply by changing the spin speed and time. Selective removal of the polymer matrix and silica spheres lead to the formation of large-area colloidal crystals and macroporous polymers, respectively. The wafer-scale process is compatible with standard semiconductor microfabrication, as multiple micrometer-sized patterns can be created simultaneously for potential device applications. Normal-incidence transmission spectra in the visible and near-infrared regions show distinct peaks due to Bragg diffraction from 3D ordered structures. The spin-coating process opens a new route to the fundamental studies of shear-induced crystallization, melting and relaxation.     

Synthesis, structure, spectroscopic properties, and electrochemistry of (1,8,15,22-tetrasubstituted phthalocyaninato)lead complexes

Three (1,8,15,22-tetrasubstituted phthalocyaninato)lead complexes Pb[Pc(alpha-OR)(4)] [H(2)Pc(alpha-OC(5)H(11))(4) = 1,8,15,22-tetrakis(3-pentyloxy)phthalocyanine; H(2)Pc(alpha-OC(7)H(15))(4) = 1,8,15,22-tetrakis(2,4-dimethyl-3-pentyloxy)phthalocyanine; H(2)Pc(alpha-OC(10)H(7))(4) = 1,8,15,22-tetrakis(2-naphthyloxy)phthalocyanine] (1-3) have been prepared as racemic mixtures by treating the corresponding metal-free phthalocyanines H(2)Pc(alpha-OR)(4) (4-6) with Pb(OAc)(2).3H(2)O in refluxing n-pentanol. The molecular structure of Pb[Pc(alpha-OC(5)H(11))(4)] (1) in the solid state has been determined by single-crystal X-ray diffraction analysis. This compound, having a nonplanar structure, crystallizes in the monoclinic system with a P2(1)/c space group. Each unit cell contains two pairs of enantiomeric molecules, which are linked by weak coordination of the Pb atom of one molecule with an aza nitrogen atom and its neighboring oxygen atom from the alkoxy substituent of another molecule, forming a pseudo-double-decker supramolecular structure in the crystals with a short ring-to-ring separation, 2.726 A, and thus a strong ring-ring pi-pi interaction. The decreased molecular symmetry for these complexes has also been revealed by the NMR spectra of 1 and 2. The methyl protons of the 3-pentyloxy and 2,4-dimethyl-3-pentyloxy side chains of 1 and 2, respectively, are chemically inequivalent. In addition to the elemental analysis and various spectroscopic characterizations, these compounds have also been electrochemically studied. Two one-electron oxidations and up to five one-electron reductions have been revealed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods.     

Collective and individual plasmon resonances in nanoparticle films obtained by spin-assisted layer-by-layer assembly

Nanoscale uniform films containing gold nanoparticle and polyelectrolyte multilayer structures were fabricated by the using spin-assembly or spin-assisted layer-by-layer (SA-LbL) deposition technique. These SA-LbL films with a general formula [Au/(PAH-PSS)nPAH]m possessed a well-organized microstructure with uniform surface morphology and high surface quality at a large scale (tens of micrometers across). Plasmon resonance peaks from isolated nanoparticles and interparticle interactions were revealed in the UV-visible extinction spectra of the SA-LbL films. All films showed the strong extinction peak in the region of 510-550 nm, which is due to the plasmon resonance of the individual gold nanoparticles redshifted because of a local dielectric environment. For films with sufficient density of gold nanoparticles within the layers, the second strong peak was consistently observed between 620 and 660 nm, which is the collective plasmon resonance from intralayer interparticle coupling. Finally, we suggested that, for certain film designs, interlayer interparticle resonance might be revealed as an independent contribution at 800 nm in UV-visible spectra. The observation of independent and concurrent individual, intralayer, and interlayer plasmon resonances can be critical for sensing applications, which involve monitoring of optomechanical properties of ultrathin optically active compliant membranes.     

Development of a miniature simultaneous MPT spectrometer

An unique miniature simultaneous microwave plasma torch (MPT) atomic emission spectrometer employing linear UV intensified charge-coupled device (ICCD) array detector has been developed and studied preliminarily. The detection limits and precisions of the spectrometer for Ag, Al, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Sr and V by using different CCD exposure times have been determined. An analysis of a practical sample has been carried out. The preliminary results demonstrate that such simultaneous spectrometer has advantages of saving sample and time, especially suitable for use as detector for chromatography and in combination with flow injection systems. Taking analytical figures of merit and portability into accounts, the miniature simultaneous MPT system will have extended application areas and greater competition potential as compared with commercialized scanning MPT spectrometers.     

The effect of micro-morphology of Bi2O3 on catalytic properties of Co/Bi catalyst for wet air oxidation of acetic acid

The novel phase transfer catalysts S-8 [4-(dimethyloctylammonium) propansultan] and DB-X [1,4-bis(triethylmethylammonium)benzene dibromide] were synthesized and employed for high conversion synthesis of dichlorocyclopropane from various olefins.This revised version was published online in December 2005 with corrections to the Cover Date.     

在SO42-/ZrO2 上苯与丙烯的烷基化反应

Super acidic catalyst SO42-/ZrO2 was prepared and characterized by XRD,IR,and Py-IR. Selectively catalytic gas phase flow reactions of benzene and propene over the catalyst were carried out in a made-to-measure high pressure flow reactor with a thermometer and a condenser. The benzene and propene were kept in pressure tanks at 8 : 1 ratio with N2 gas at 4. 0 MPa. The reactants were pumped into the quantifier where the pressure was maintained by N2 gas at 8. 0 MPa. They were then pumped into the reaction reactor using catalytic synthesis of isopropyl benzene. The collected liquid phase products were analyzed using GC-MS. Product analyses were carried out on SE-54. The effect of the preparative condition on the catalytic synthesis of isopropyl benzene over the catalysts has been tested. The result shows that the SO42-/ZrO2 can be used as a catalyst for the title reaction,and shows higher conversion（99.2%）for the propene and higher selectivity（93.3%）for the isopropyl benzene when the catalyst is preparated in some condition.     

(6aR,11aR)-3-羟基-4,9-二甲氧基紫檀烷分子的晶体结构

(6aR,11aR)-4,9-dimethoxy-3-hydroxypterocarpan was isolated from the natural plant of Caragana spinifera Kom (Leguminosae). The structure was elucidated by infrared spectra(IR), mass spectrometry(MS), 1H-Nuclear magnetic resonance(1H-NMR),13C-Nuclear Magnetic Resonance(13C-NMR), 1H-1H correlation spectroscopy(1H-1H COSY), heteronuclear multiple quantum coherence(HMQC) and heteronuclear multiple bond coherence(HMBC). In addition, its crystal structure was determined by the single-crystal X-ray diffraction analysis. It crystalized in monoclinic, space group P21 with a=6.4778(13), b=12.631(3), c=8.8368(18)(A), β= 95.8(3)o, C17H16O5, Mr=300.30, V=719.3(3)(A)3, Z=2, Dc=1.386 Mg/m3, F(000)=316, μ=0.102 mm-1, the final R=0.0332 and wR=0.0862 for 1533 observed reflections (I>2σ(I)). The molecular backone of the compound includes a benzofuro and a benzopyran. The X-ray analysis shows that the absolute configuration of the compound is cis-pterocarpan.     

The First New Hydrogen-Bonded Heterohexanuclear Complex [(salen)Cu]4[(salen)Fe(H2O)2]2(ClO4)2: Molecular and Crystal Structure and Magnetic Properties

The preparation, magnetic properties, and crystal structure of [(salen)Cu]₄[(salen)Fe(H₂O)₂]₂(ClO₄)₂ via hydrogen bonding are described [salen=N,N-ethylenebis (salicylideneiminate)]. Crystals are triclinic, of space group , with cell constants a=12.853(3), b=13.921(3), c=14.251(3) Å, =68.68(3)°, =87.86(3)°, =86.82(3)°, and Z=1. The structure was solved and refined to R=0.064 and R=0.068. The structure comprises the hexanuclear units which result from the linking of four mononuclear fragments [(salen)Cu] and two mononuclear fragment [(salen)Fe(H₂O)]⁺, through Cu -O H -O -Fe -O -H O -Cu hydrogen bonds of coordinating H₂O. In this complex, Fe^III ions are in almost square-planar surroundings. The temperature dependences of the magnetic susceptibilities of the complex have been studied in the 4.2–300 K range, indicating the presence of an antiferromagnetic interactions between metal ions.