纳米金颗粒增强信号的电化学生物传感器用于谷胱甘肽和半胱氨酸的检测

构建了一种高灵敏检测谷胱甘肽(GSH)和半胱氨酸(Cys)的新型电化学生物传感器. 先将富含T碱基的DNA1和DNA2探针分别修饰在金电极和纳米金颗粒(AuNPs)上, 再加入Hg²⁺, 通过形成T-Hg²⁺-T结构使AuNPs结合到金电极表面. 当加入GSH(或Cys)后, GSH(或Cys)可以竞争结合T-Hg²⁺-T结构中的Hg²⁺, 使AuNPs离开电极表面. 由于AuNPs上修饰的DNA探针能够静电吸附大量电活性物质六氨合钌(RuHex), 因此该过程可引起计时电量信号的显著变化, 据此实现了GSH(或Cys)的高灵敏检测. 该传感器的检出限达10 pmol/L, 比荧光法或比色法降低了2~3个数量级. 实验结果表明, 该传感器具有较好的选择性.     

Effects of atomic oxygen irradiation on structural and tribological properties of polyimide/Al2O3 composites

To understand the effects of atomic oxygen (AO) irradiation on the structural and tribological behaviors of polymer composites, polyimide/Al₂O₃ composites were irradiated with AO in a ground‐based simulation facility. The structural changes were characterized by X‐ray photoelectron spectroscopy and attenuated total‐reflection FTIR, whereas the tribological changes were evaluated by friction and wear tests as well as scanning electron microscopy analysis of the worn surfaces. It was found that AO irradiation induced the oxidation and degradation of polyimide molecular chains, which increased the O concentration and decreased the C concentration in the composite surfaces. The destruction action of AO changed the surface chemical structure and morphology of the samples. Friction and wear tests indicated that AO irradiation decreased the friction coefficient but increased the wear rate of both pure and Al₂O₃ filled polyimides. In terms of the tribological properties, appropriate content of Al₂O₃ might be favorable for the improvement of tribological properties in AO environment. Copyright © 2011 John Wiley & Sons, Ltd.     

硼氢化钠水解制氢的研究

采用置换镀的方法在泡沫镍基体上获得不同载钌量的NaBH4水解制氢催化剂。实验结果表明，NaBH4水解制氢反应为零级反应，氢气生成速率随载钌量的增加而变快；当泡沫镍表面完全被钌覆盖时，载钌量为6%，相应的催化能力最强。与离子交换树脂载钌催化剂相比，泡沫镍载钌催化剂更稳定、耐用。实验还证实，30%比35%的NaBH4水溶液在相同的催化剂作用下更易发生水解反应；NaBH4水溶液中加入少量的NaOH有助于提高钌催化剂的催化性能。通过对NaBH4储氢体系的能量计算，说明采用该氢源体系的微型燃料电池的能量密度有望达到甚至超过锂离子电池的比能量水平。     

量热法研究氯化铒与甘氨酸配合物的标准生成焓

量热法测定;量热法研究氯化铒与甘氨酸配合物的标准生成焓     

Monodentate AIEgen Anchored on Metal‐Organic Framework for Fast Fluorescence Sensing of Phosphate

Herein, a novel sensor (TPE‐UiO‐66) was designed via anchoring monodentate tetraphenylethylene (TPE) onto UiO‐66 framework. The combination of the distinct aggregation‐induced emission (AIE) of TPE and the easy replacement of monodentate linker by guest phosphate, makes TPE‐UiO‐66 an ideal platform for sensing HPO₄^2–. Experimental results indicate that TPE‐UiO‐66 can selectively sense HPO₄^2– from other common anions. The limit of detection (LOD) can reach to 5.56 μmol·L^–1 and more importantly, TPE‐UiO‐66 also exhibits an ultra‐fast equilibrium response of 2 min, far faster than those of other sensors especially for UiO‐66‐NH₂. The combination of experimental analysis and density functional theory (DFT) calculations demonstrates that the high selectivity, high sensitivity and fast response of HPO₄^2– detection by TPE‐UiO‐66 can be attributed to the stronger coordination interactions of HPO₄^2– with Zr‐O cluster of UiO‐66 than that of TPE molecule. This study not only provides a potential probe for phosphate, but also represents a novel strategy to design stimuli‐responsive fluorescent MOF‐based sensors via using monodentate AIEgens.     

贵金属钌基催化剂合成及应用研究进展

钌催化剂是近年来新兴的贵金属催化剂,其负载型催化剂具有节约成本、可回收利用、催化性能优异等优势,受到研究人员的广泛关注.本文对负载型钌基催化剂在氨合成反应、加氢反应、氧化反应的合成及应用进行了综述,主要阐述了反应过程中的载体与助剂、制备方法和催化性能,并对当前反应中存在的问题进行归纳和总结,最后提出负载型钌基催化剂现阶...     

Pt Nanoparticle‐modified Carbon Fiber Microelectrode for Selective Electrochemical Sensing of Hydrogen Peroxide

We report a simple approach to the production of carbon fiber‐based amperometric microbiosensors for selective detection of hydrogen peroxide (H₂O₂), which was achieved by electrometallization of carbon fiber microelectrodes (CFMs) by electrodeposition of Pt nanoparticles. The Pt‐carbon hybrid sensing interface provided a sensitivity of 7711±587 μA ? mM^?1 ? cm^?2, a detection limit of 0.53±0.16 μM (S/N=3), a linear range of 0.8 μM–8.6 mM, and a response time of <2 sec. The morphologies of the Pt nanoparticle‐modified CFMs were characterized by scanning electron microscopy. To achieve selectivity, permseletive layers, polyphenylenediamine (PPD) and Nafion, were deposited resulting in exclusion of the anionic and cationic interferents, ascorbic acid and dopamine, respectively, at their physiologically relevant concentrations. The resultant sensors displayed a sensitivity to hydrogen peroxide of 1381±72 μA ? mM^?1 ? cm^?2, and a detection limit of 0.86±0.19 μM (S/N=3). This simple and rapid metallization method converts carbon fiber microelectrodes, which are readily accessible, to microscale Pt electrodes in 2 min, providing a platform for oxidase‐based amperometric biosensors with improved spatial resolution over more commonly used platinum electrode array microprobes.     

Fabrication of Boron Nitride Nanosheets by Exfoliation

Nanomaterials with layered structures, with their intriguing properties, are of great research interest nowadays. As one of the primary two‐dimensional nanomaterials, the hexagonal boron nitride nanosheet (BNNS, also called white graphene), which is an analogue of graphene, possesses various attractive properties, such as high intrinsic thermal conductivity, excellent chemical and thermal stability, and electrical insulation properties. After being discovered, it has been one of the most intensively studied two‐dimensional non‐carbon nanomaterials and has been applied in a wide range of applications. To support the exploration of applications of BNNSs, exfoliation, as one of the most promising approaches to realize large‐scale production of BNNSs, has been intensively investigated. In this review, methods to yield BNNSs by exfoliation will be summarized and compared with other potential fabrication methods of BNNSs. In addition, the future prospects of the exfoliation of h‐BN will also be discussed.     

变截面双帽箱型横截面点焊薄壁构件的扭转问题

提出沿构件长度方向截面尺寸发生缓慢变化时双帽箱型横截面点焊薄壁构件扭转特性的分析方法,并利用此方法讨论了变截面等焊点间隔构件和变截面非等焊点间隔构件的翘曲扭转问题并得到如下结论:①变截面构件长度越长,扭转刚度越小,其刚度下降率与等截面构件几乎相等;②采用变截面构件,不仅保持一定刚度,还可以减少焊点数目,降低焊接成本;③若右半部分的焊点间隔p2对左半部分的焊点间隔p1的变化范围小于25%,则其传递剪力变化不大。仿真结果与实验值以及利用cosmos/m而得到的数值解相比较吻合得较好,完全满足工程精度要求。此研究为解决实际车体结构的设计问题,具有有益的参考价值。     

Limit cycle bifurcations near a double homoclinic loop with a nilpotent saddle of order m

In this paper, we study the explicit expansion of the first order Melnikov function near a double homoclinic loop passing through a nilpotent saddle of order m in a near-Hamiltonian system. For any positive integer $m(m\ge 1)$, we derive the formulas of the coefficients in the expansion, which can be used to study the limit cycle bifurcations for near-Hamiltonian systems. In particular, for $m=2$, we use the coefficients to consider the limit cycle bifurcations of general near-Hamiltonian systems and give the existence conditions for 10, 11, 13, 15 and 16 (11, 13 and 16, respectively) limit cycles in the case that the homoclinic loop is of cuspidal type (smooth type, respectively) and their distributions. As an application, we consider a near-Hamiltonian system with a nilpotent saddle of order 2 and obtain the lower bounds of the maximal number of limit cycles.