基于FeWOx/SiO2载氧体的甲烷化学链部分氧化反应

甲烷具有价格低廉且储量丰富的优点,因此将甲烷转化为合成气(一种H2:CO为2的混合物),从而进一步合成有价值的化学品和液体燃料引起了人们的极大关注.化学链甲烷部分氧化(CLPOM)技术能避免甲烷与空气直接接触而引起爆炸的危险,可以降低后续对合成气与氮气分离操作所带来的费用,因此日益受到关注.CLOPM过程主要分为两步:第一步,CH4被载氧体所携带的氧部分氧化,载氧体被还原;第二步,利用氧化剂(例如空气)将被还原的载氧体再氧化恢复.因此,载氧体在CLOPM过程中起到至关重要的作用.载氧体的选择主要存在两个问题:(1)甲烷被活化所产生含碳产物的能力与晶格氧的给氧能力不匹配所带来的严重碳沉积;(2)金属离子间扩散速率不匹配而造成载氧体在氧化还原过程中结构的不可逆变化.基于上述两个问题,本文设计了FeWOx/SiO2载氧体用于CLPOM.与未改性的WO3/SiO2载氧体相比,甲烷的转化率和合成气的收率都有显著提高.FeWOx/SiO2在900℃、1 atm反应条件下表现出62%的甲烷转化率、93%的CO气相选择性、94%的H2选择性和2.4的H2/CO比值,同时在50个循环中表现出优异的催化活性和稳定性.本工作利用CH4脉冲反应研究了FeWOx/SiO2的甲烷表面反应过程;采用CH4-TPR和H2-TPR相结合探究了甲烷活化速率与晶格氧扩散速率之间的关系;通过XPS和XRD对FeWOx/SiO2在氧化还原过程中的结构稳定性进行了探讨.综合上述实验结果,对FeWOx/SiO2应用于CLPOM的反应机理进行了阐述.H2-TPR结果表明,在FeWOx/SiO2中,相较于Fe2O3/SiO2,Fe-O的活性受到抑制,使其更倾向于与甲烷发生部分氧化反应;相较于WO3/SiO2,W-O的活性得到明显提升,因此更多的晶格氧可以参与到部分氧化反应中来氧化积碳,从而使合成气收率大幅度提升.从CH4-TPR结果可以看出,对于FeWOx/SiO2,CO与H2的生成温度最接近,意味着晶格氧的传输速率较快并且能够与甲烷活化产生含碳中间物种的速率相匹配,将其及时氧化生成CO,避免由于积碳造成的催化剂失活.结合XPS和XRD结果可以得出,在甲烷还原过程中,FeWOx经历一步还原形成Fe-W合金,由于其间存在强相互作用,因而抑制了还原过程中催化剂相分离现象的发生.同时,根据铁钨离子在空气条件下扩散速率的公式计算可以得出,其相近的离子氧化速率也保证了在氧化过程中催化剂结构的稳定性.本工作为进一步构建用于甲烷化学链部分氧化制合成气的复合金属氧化物载氧体提供了研究思路.     

石墨相氮化碳可见光下活化过一硫酸盐氧化降解光惰性邻苯二甲酸二甲酯的机理研究（英文）

近几年过一硫酸盐(PMS)活化技术备受关注,其中利用太阳能活化PMS具有可持续和环保的优势,但PMS本身不吸收可见光.因此,本文提出利用具有可见光响应的石墨相氮化碳(g-C3N4)激发产生光电子进而活化PMS.首先利用三聚氰胺前驱体通过热缩聚法制备g-C3N4,通过X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、紫外-可见光漫反射(UV-Vis)、荧光光谱(PL)、透射电镜(TEM)、N2吸附脱附测试(BET)、电化学等一系列方法对g-C3N4进行表征,研究其表面性质及光学性能.结果显示, g-C3N4具有典型的片层结构和可见光活性,禁带宽度为2.7 e V.本文选取光惰性的内分泌干扰物邻苯二甲酸二甲酯(DMP)为目标污染物,系统地研究了其降解动力学和降解机理.研究发现,在短波紫外光(254和300nm)照射下,直接光解和·OH参与的反应机理能实现DMP的光降解,而在可见光照射下g-C3N4介导的光催化过程不能使DMP分解;但当添加PMS时,体系主导自由基由·O2–转化为SO4·–和·OH,从而实现DMP的有效降解和矿化.研究还发现,高浓度的PMS和高剂量的g-C3N4均可以提高PMS的活化量和相应的DMP降解效率,但提高催化剂剂量的方式能更充分的利用PMS.尽管高浓度的DMP阻碍了PMS和光催化剂g-C3N4的有效接触,但可以提高PMS的利用率.当p H低于零电荷点(5.4)时, DMP的降解效率较高.此外,使用两种淬灭剂(乙醇和叔丁醇)与DMP进行竞争性实验,结合电子自旋共振检测,表明SO4·–和·OH都是体系主要的自由基.此外,还对g-C3N4的可持续性能进行考察,四次循环实验结果显示,该催化剂具有良好的可重复利用性.对DMP降解进行总有机碳测定,发现降低了19%.最后,利用液相色谱质谱联用对DMP降解产物进行定性定量分析,发现DMP主要通过SO4·–和·OH对苯环的攻击以及脂肪族链的氧化断键这两种途径进行降解.综上可见,利用可见光激发g-C3N4产生的光电子能有效活化PMS降解顽固型有机污染物,可为实现太阳能活化PMS技术提供有力的技术参考.     

Constructing spin-adiabatic states for the modeling of spin-crossing reactions. I. A shared-orbital implementation

In the modeling of spin-crossing reactions, it has become popular to directly explore the spin-adiabatic surfaces. Specifically, through constructing spin-adiabatic states from a two-state Hamiltonian (with spin-orbit coupling matrix elements) at each geometry, one can readily employ advanced geometry optimization algorithms to acquire a “transition state” structure, where the spin crossing occurs. In this work, we report the implementation of a fully-variational spin-adiabatic approach based on Kohn-Sham density functional theory spin states (sharing the same set of molecular orbitals) and the Breit-Pauli one-electron spin-orbit operator. For three model spin-crossing reactions (predissociation of N₂O, singlet-triplet conversion in CH₂, and CO addition to Fe(CO)₄), the spin-crossing points were obtained. Our results also indicated the Breit-Pauli one-electron spin-orbit coupling can vary significantly along the reaction pathway on the spin-adiabatic energy surface. On the other hand, due to the restriction that low-spin and high-spin states share the same set of molecular orbitals, the acquired spin-adiabatic energy surface shows a cusp (ie, a first-order discontinuity) at the crossing point, which prevents the use of standard geometry optimization algorithms to pinpoint the crossing point. An extension with this restriction removed is being developed to achieve the smoothness of spin-adiabatic surfaces.     

Stabilities,Electronic Structures,and Bonding Properties of Iron Complexes (E1E2)Fe(CO)2(CNArTripp2)2 (E1E2=BF,CO, N2, CN−, or NO+)**

The coordination of 10-electron diatomic ligands (BF, CO N₂) to iron complexes Fe(CO)₂(CNAr^Tripp2)₂ [Ar^Tripp2=2,6-(2,4,6-(iso-propyl)₃C₆H₂)₂C₆H₃] have been realized in experiments very recently (Science, 2019 , 363, 1203–1205). Herein, the stability, electronic structures, and bonding properties of (E₁E₂)Fe-(CO)₂(CNAr^Tripp2)₂ (E₁E₂=BF, CO, N₂, CN⁻, NO⁺) were studied using density functional (DFT) calculations. The ground state of all those molecules is singlet and the calculated geometries are in excellent agreement with the experimental values. The natural bond orbital analysis revealed that Fe is negatively charged while E₁ possesses positive charges. By employing the energy decomposition analysis, the bonding nature of the E₂E₁–Fe(CO)₂(CNAr^Tripp2)₂ bond was disclosed to be the classic dative bond E₂E₁→Fe(CO)₂(CNAr^Tripp2)₂ rather than the electron-sharing double bond. More interestingly, the bonding strength between BF and Fe(CO)₂(CNAr^Tripp2)₂ is much stronger than that between CO (or N₂) and Fe(CO)₂(CNAr^Tripp2)₂, which is ascribed to the better σ-donation and π back-donations. However, the orbital interactions in CN⁻→Fe(CO)₂(CNAr^Tripp2)₂ and NO⁺→Fe(CO)₂(CNAr^Tripp2)₂ mainly come from σ-donation and π back-donation, respectively. The different contributions from σ donation and π donation for different ligands can be well explained by using the energy levels of E₁E₂ and Fe(CO)₂(CNAr^Tripp2)₂ fragments.     

Structure Determination of Alkynyl‐Protected Gold Nanocluster Au22(tBuC≡C)18 and Its Thermochromic Luminescence

An alkynyl‐protected gold nanocluster, Au₂₂(^tBuC≡C)₁₈ ( 1 ), has been synthesized and its structure has been determined by single‐crystal X‐ray diffraction. The molecular structure consists of a Au₁₃ cuboctahedron kernel and three [Au₃(^tBuC≡C)₄] trimeric staples. The cluster 1 has strong luminescence in the solid state with a 15 % quantum yield, and it displays interesting thermochromic luminescence as revealed by temperature‐dependent emission spectra. The enhanced room‐temperature emission is characterized as thermally activated delayed fluorescence.     

Thermal hazard assessment and ranking for organic peroxides using quantitative structure–property relationship approaches

Journal of Thermal Analysis and Calorimetry - Chemical reactivity hazards of organic peroxides are major concerns of the chemical industry due to many serious incidents every year. Thermal hazard...     

Asymmetric Synthesis and Application of Chiral Spirosilabiindanes

Reported here is the development of a class of chiral spirosilabiindane scaffolds by Rh‐catalyzed asymmetric double hydrosilation, for the first time. Enantiopure SPSiOL (spirosilabiindane diol), a new type of chiral building block for the preparation of various chiral ligands and catalysts, was readily prepared on greater than 10 gram scale using this protocol. The potential of this new spirosilabiindane scaffold in asymmetric catalysis was preliminarily demonstrated by development of the corresponding monodentate phosphoramidite ligands (SPSiPhos), which were used in both a Rh‐catalyzed hydrogenation and a Pd‐catalyzed intramolecular carboamination.     

Full use of the liquid nature of the stationary phase: The development of elution‐extrusion counter current chromatography

Elution‐extrusion counter current chromatography extrudes the most solute retained in the column with the highest possible peak resolution. It can greatly improve the hydrophobic window. In recent years, elution‐extrusion counter current chromatography has received extensive attention in the separation of complex samples. This article first reviews the development and application of elution‐extrusion counter current chromatography, including its origin, mechanism, advantages and disadvantages, and some representative applications. At the same time, this review also shared our visions and ideas on how to improve the elution‐extrusion mode. This article aims to provide certain reference for the research of this technology.     

Complex Polypropionates from a South China Sea Photosynthetic Mollusk: Isolation and Biomimetic Synthesis Highlighting Novel Rearrangements

Placobranchus ocellatus is well known to produce diverse and complex γ‐pyrone polypropionates. In this study, the chemical investigation of P. ocellatus from the South China Sea led to the discovery and identification of ocellatusones A–D, a series of racemic non‐γ‐pyrone polyketides with novel skeletons, characterized by a bicyclo[3.2.1]octane ( 1 , 2 ), a bicyclo[3.3.1]nonane ( 3 ) or a mesitylene‐substituted dimethylfuran‐3(2H)‐one core ( 4 ). Extensive spectroscopic analysis, quantum chemical computation, chemical synthesis, and/or X‐ray diffraction analysis were used to determine the structure and absolute configuration of the new compounds, including each enantiomer of racemic compounds 1 – 4 after chiral HPLC resolution. An array of new and diversity‐generating rearrangements is proposed to explain the biosynthesis of these unusual compounds based on careful structural analysis and comparison with six known co‐occurring γ‐pyrones ( 5 – 10 ). Furthermore, the successful biomimetic semisynthesis of ocellatusone A ( 1 ) confirmed the proposed rearrangement through an unprecedented acid induced cascade reaction.     

Ordered Solid‐State Microstructures of Conjugated Polymers Arising from Solution‐State Aggregation

Controlling the solution‐state aggregation of conjugated polymers for producing specific microstructures remains challenging. Herein, a practical approach is developed to finely tune the solid‐state microstructures through temperature‐controlled solution‐state aggregation and polymer crystallization. High temperature generates significant conformation fluctuation of conjugated backbones in solution, which facilitates the polymer crystallization from solvated aggregates to orderly packed structures. The polymer films deposited at high temperatures exhibit less structural disorders and higher electron mobilities (up to two orders of magnitude) in field‐effect transistors, compared to those deposited at low temperatures. This work provides an effective strategy to tune the solution‐state aggregation to reveal the relationship between solution‐state aggregation and solid‐state microstructures of conjugated polymers.