High extraction efficiency fiber coated with calix[4] open-chain crown ether for solid-phase microextraction of polar aromatic and aliphatic compounds

The calix[4] open-chain crown ether, 5,11,17,23-tetra-tert-butyl-25,27-di(2-allyloxyethoxyl)-26,28-dihydroxycalix[4]arene was synthesized and used for preparation of solid-phase microextraction (SPME) fibers of enhanced extraction efficiency. The new SPME coating made from calix[4] open-chain crown ether and hydroxyl-terminated silicone oil was developed with the aid of vinyltriethoxylsilane as bridge using sol-gel method and cross-linking technology. The efficiency of the novel fiber in the extraction of polar aromatic and aliphatic compounds, such as phenols, alcohols, and volatile fatty acids, was also investigated. Due to the introduction of the polar open-chain crown ether in calix[4]arene molecules, the calix[4] open-chain crown ether fiber showed much better selectivity and sensitivity to these polar compounds in comparison with calix[4]arene fiber. It also had superior extraction efficiency when compared to commercial poly(dimethylsiloxane)-divinylbenzene and polyacrylate fibers. Parts per billion to parts per trillion level detection limits were achieved for most of the analytes through SPME in conjunction with GC and flame ionization detector. The linear ranges were two to four orders of magnitude, and the RSD values were below 7% for all analytes. The novel fiber was applied to determine volatile alcohols and fatty acids in wine samples. The volatile-free wine prepared in this work was used to assure similar chemical environment for analytes in both calibration solutions and in real wine samples, thus compensating for possible matrix interferences. The established internal standard method using 4-methyl-2-pentanol as internal standard showed satisfactory accuracy and precision.     

Synthesis of N—（4—Salicylideneiminoaryl）monoaza Crown Ethers and Dioxygen Affinities of Their Cobalt（Ⅱ）Complexes

The Schiff base‐containing pendant monoaza crown ether HL¹, HL², HL³ and HL⁴ have been synthesized by condensation of salicylaldehyde with N‐(4‐aminoaryl) monoaza crown ethers, which were prepared conveniently from 4‐nitro‐N, N‐di(hydroxyethyl) aniline or 4‐nitrobenzyl chloride via cyclization or condensation and reduction. The structures of HL¹—HL⁴ were verified by ¹H NMR, IR spectra, MS and elemental analysis. Moreover, the oxygenation constants (KO2) and thermodynamic parameters (δH⁰ and δS⁰) of their cobalt(II) complexes were determined in the range of ?5 °C to 25 °C, and the effect of crown ring bonded to a Schiff base on the dioxygen affinities of cobalt(II) complexes was also observed as compared to the uncrowned analogue (CoL).     

Photochemical naphthylation at(α-carbon atom of carbonyl and its equivalences

The photostimulated reaction of halonaphthalene with a series of carbanions derived from,propionic acid derivatives in liquid ammonia led to the naphthylation at a-carbon of the carbanions inan isolated yield ranging from 25％ to 86％.In all cases,the dehalonaphthalenes were found to,be by-products and the reaction was inhibited by p-dinitrobenzere.An electron transfer from thecarbanion to the halonaphthalene followed by ejection of halogen led to naphtbyl radical,as predictedby comparing the LUMOs of the carbanions and the halonaphthalenes,was involved in the process.Absence of the alkylnaphthalene and 1,2-dinaphthylalkane in the products indicates the smoothelectron transfer between(Naph-Nu)~+ and Naph-X.C-vs.O-naphthylation is fully addressed interms of MNDO calculations and acid-base principle.     

Application of artificial neural networks in multivariable optimization of an on-line microwave FIA system for catalytic kinetic determination of iridium(III)

A new rapid, selective and sensitive on-line microwave flow injection-kinetic method was developed for spectrophotometric determination of micro amounts of Ir(III), based on its catalytic effect on the m-acetylchlorophosphonazo (CPA-mA) and KIO(4) reaction in NaOH media. An on-line microwave oven was employed to accelerate the reaction. The reaction was followed spectrophotometrically by measuring the decrease of the absorbance of CPA-mA at 580 nm. The effect of five variables for the determination of Ir(III) was optimized by means of a multilayer artificial neural network using extended delta-bar-delta (EDBD) algorithms. Under the optimum experimental conditions, Ir(III) could be determined in the range 0.060-0.60 micro gZZZ;mL(-1) with detection limit of 0.02 micro gZZZ;mL(-1) and the sampling frequency of 34 h(-1). The proposed method was applied to the determination of micro amounts of Ir(III) in refined ore and secondary alloy with the recoveries from 91.4% to 109%.     

Mesoscale organization of CuO nanoribbons: formation of "dandelions"

A two-tiered organizing scheme with multiple-length scales for construction of dandelion-like hollow CuO microspheres has been elucidated: (1) mesoscale formation of rhombic building units from smaller nanoribbons via oriented aggregation and (2) macroscopic organization of these units into the CuO microspheres. This self-assembly concept may also be applicable to other metal oxides by creating geometric constraints for constructional units.     

玉米叶片残体腐解过程的傅里叶变换红外光谱研究

采用傅里叶变换红外光谱对玉米植株叶片残体腐解过程进行了研究。结果表明，随着玉米叶片残体腐解的进行，羟基，酮碳基，甲基，在和次甲基的含量逐渐降收据 的含量增加。     

Enantioseparation of Amino Acid Derivatives with a Cellulose-Based Chiral Stationary Phase

Five structurally related amino acid derivatives were enantioseparated by HPLC with a commercially available chiral stationary phase, Chiralcel OD-H. The chromatographic experiments were performed in the normal phase mode. n-Hexane/polar alcohol was used as mobile phase. Excellent baseline enantioseparations could be obtained for all these solutes. The effects of the concentration of polar alcohol and the column temperature on the retentions and enantioseparations were studied in detail. From the van't Hoff plots the corresponding apparent thermodynamic parameters were derived. Mechanism aspects of chiral recognition were discussed based on the relationship between the thermodynamic parameters and the structures of the solutes. It was found that the substituent of the phenyl group on the residual group of the amino acid derivatives was close relevant to thermodynamic origin of enantioseparation. Much better enthalpy–entropy compensation effect was obtained by plotting the differential, rather than the original, thermodynamic parameters.     

苯并氮杂冠醚化合物在氘代氯仿中的溶剂效应的动态1H NMR研究

本文讨论了样品浓度对苯并氮杂冠醚化合物-氘代氯仿溶液~1H NMR镨及~1H纵向弛豫时间的影响(稀释位移效应)。在实验基础上提出了苯并氮杂冠醚化合物在氯仿中的叔胺-叔铵盐交换作用机制。以此馐土讼∈臀灰菩в? 并得到巳止诿鸦衔锎邮灏返绞屣а蔚姆从ζ胶獬Ｊ齂_2和交换速率常数k, 另外, 本文还讨论了冠醚环中氮原子上取代基对稀释位移效应的影响,     

Enantioseparation of amino acid derivatives on an immobilized network polymer derived from L-tartaric acid

Seven structurally related amino acid derivatives were successfully enantioseparated by HPLC with a commercially available column containing a chiral immobilized network polymer derived from L-tartaric acid. The experiments were carried out under normal-phase conditions. All the solutes could be baseline separated using n-hexane/2-propanol (95/5) as eluent at a flow rate of 1 ml/min at 25 degrees C, with reasonable retention time (<12 min). The effects of the polar alcohol modifier (type and content) in the mobile phase and the column temperature on the enantioseparation were studied. Apparent thermodynamic parameters were also calculated from the plots of ln alpha or ln k' versus 1/T. Some mechanistic aspects of chiral recognition were discussed with respect to the structures of the solutes. It was found that the enantioseparations are all enthalpy driven, and the N-acyl groups of the solutes have significant influence on the chiral recognition.     

Melting points and thermal expansivities of proton-disordered hexagonal ice with several model potentials

A method of free energy calculation is proposed, which enables to cover a wide range of pressure and temperature. The free energies of proton-disordered hexagonal ice (ice Ih) and liquid water are calculated for the TIP4P [J. Chem. Phys. 79, 926 (1983)] model and the TIP5P [J. Chem. Phys. 112, 8910 (2000)] model. From the calculated free energy curves, we determine the melting point of the proton-disordered hexagonal ice at 0.1 MPa (atmospheric pressure), 50 MPa, 100 MPa, and 200 MPa. The melting temperatures at atmospheric pressure for the TIP4P ice and the TIP5P ice are found to be about T(m)=229 K and T(m)=268 K, respectively. The melting temperatures decrease as the pressure is increased, a feature consistent with the pressure dependence of the melting point for realistic proton-disordered hexagonal ice. We also calculate the thermal expansivity of the model ices. Negative thermal expansivity is observed at the low temperature region for the TIP4P ice, but not for the TIP5P ice at the ambient pressure.