Derivative spectrophotometric analysis of benzophenone (as an impurity) in phenytoin

Background

Biomass and municipal solid waste offer sustainable sources of energy; for example to meet heat and electricity demand in the form of combined cooling, heat and power. Combustion of biomass has a lesser impact than solid fossil fuels (e.g. coal) upon gas pollutant emissions, whilst energy recovery from municipal solid waste is a beneficial component of an integrated, sustainable waste management programme. Concurrent combustion of these fuels using a fluidised bed combustor may be a successful method of overcoming some of the disadvantages of biomass (high fuel supply and distribution costs, combustion characteristics) and characteristics of municipal solid waste (heterogeneous content, conflict with materials recycling). It should be considered that combustion of municipal solid waste may be a financially attractive disposal route if a 'gate fee' value exists for accepting waste for combustion, which will reduce the net cost of utilising relatively more expensive biomass fuels.

Results

Emissions of nitrogen monoxide and sulphur dioxide for combustion of biomass are suppressed after substitution of biomass for municipal solid waste materials as the input fuel mixture. Interactions between these and other pollutants such as hydrogen chloride, nitrous oxide and carbon monoxide indicate complex, competing reactions occur between intermediates of these compounds to determine final resultant emissions.

Conclusions

Fluidised bed concurrent combustion is an appropriate technique to exploit biomass and municipal solid waste resources, without the use of fossil fuels. The addition of municipal solid waste to biomass combustion has the effect of reducing emissions of some gaseous pollutants.     

Derivative spectrophotometric analysis of benzophenone (as an impurity) in phenytoin

ABSTRACT: Three simple and rapid spectrophotometric methods were developed for detection and trace determination of benzophenone (the main impurity) in phenytoin bulk powder and pharmaceutical formulations. The first method, zero-crossing first derivative spectrophotometry, depends on measuring the first derivative trough values at 257.6 nm for benzophenone. The second method, zero-crossing third derivative spectrophotometry, depends on measuring the third derivative peak values at 263.2 nm. The third method, ratio first derivative spectrophotometry, depends on measuring the peak amplitudes of the first derivative of the ratio spectra (the spectra of benzophenone divided by the spectrum of 5.0 μg/mL phenytoin solution) at 272 nm. The calibration graphs were linear over the range of 1-10 μg/mL. The detection limits of the first and the third derivative methods were found to be 0.04 μg/mL and 0.11 μg/mL and the quantitation limits were 0.13 μg/mL and 0.34 μg/mL, respectively, while for the ratio derivative method, the detection limit was 0.06 μg/mL and the quantitation limit was 0.18 μg/mL. The proposed methods were applied successfully to the assay of the studied drug in phenytoin bulk powder and certain pharmaceutical preparations. The results were statistically compared to those obtained using a polarographic method and were found to be in good agreement.     

Organic Reaction in Water: A Highly Efficient and Environmentally Friendly Synthesis of Spiro Compounds Catalyzed by L‐Proline

We have developed a clean, simple and efficient method for the synthesis of spiro compounds by three‐component reaction of isatins (=1H‐indole‐2,3‐diones) or acenaphthylene‐1,2‐dione, 1,3‐diphenyl‐1H‐pyrazoles‐5‐amines, and tetronic acid (=furan‐2,4‐(3H,5H)‐dione or 2‐hydroxy‐1,4‐naphthoquinone in the presence of a catalytic amount of L ‐proline in aqueous media. The advantages of this procedure are mild reaction conditions, high yields of products, operational simplicity, and easy workup procedures employed.     

Influence of copper substitution on the interaction of ethylene over iron clusters: a theoretical study

We report the results of density functional theory (DFT) calculations of ethylene adsorption over the most stable pure and bimetallic clusters of Fe(n)Cu(m) (2 ≤ m+n ≤ 4), in two adsorption modes of π and di-σ. Our results show that the quality of interaction of ethylene with iron center in bimetallic clusters of iron-copper is characteristically different from what is found over pure iron. Over the range of our studies for dimers, trimers, and tetramers, whether for π or di-σ mode, alloying iron clusters results in a substantial improvement in adsorption of ethylene over cluster and exhibits a notable increase in binding and interaction energies compared with pure iron clusters. One of the interesting features of this adsorption is that ethylene never orients toward di-σ mode for Cu-Cu or Fe-Cu bonds, and π orientation is strongly preferred. Ethylene adsorption in di-σ coordination is accompanied by the sever restructuring, larger deformation energy, and the larger interaction energy. In the next part, we answer this question of how electronic perturbations induced by copper atoms can enhance the activity of iron toward ethylene. This interpretation is done within the framework of natural bond orbital (NBO) and natural resonance theory (NRT) analyses. Different reaction pathways detected by NRT analysis (donor-acceptor, metallacyclic, and carbanion) reveal interesting aspects of differences between the nature of metal-alkene coordination in bimetallic and purely metallic clusters.     

Speciation and Determination of Trace Amount of Inorganic Arsenic in Water,Environmental and Biological Samples

A new speciation and preconcentration method based on dispersive liquid‐liquid microextraction has been developed for trace amounts of As(III) and As(V) in urine and water samples. At pH 4, As(III) is complexed with ammoniumpyrrolidine dithiocarbamate and extracted into 1‐Hexyl‐3‐methylimidazolium hexafluorophosphate, as an ionic liquid (IL) and As(III) is determined by electrothermal atomic absorption spectrometery (ETAAS). Arsenic(V) in the mixing solution containing As(III) and As(V) was reduced by using KI and ascorbic acid in HCl solution and then the procedure was applied to determination of total arsenic. Arsenic(V) was calculated as the difference between the total arsenic content and As(III) content. The effect of various parameters on the recovery of the arsenic ions has been studied. Under the optimum conditions, the enrichment factor 135 was obtained. The proposed method was successfully applied to the determination of trace amounts of As(III) and As(V) in water and biological samples.     

Bilateral filtering of magnetic resonance phase images

High-pass filtering is required for the removal of background field inhomogeneities in magnetic resonance phase images. This high-pass filtering smooths across boundaries between areas with large differences in phase. The most prominent boundary is the surface of the brain where areas with large phase values inside the brain are located close to areas outside the brain where the phase is, on average, zero. Cortical areas, which are of great interest in brain MRI, are therefore often degraded by high-pass filtering. Here, we propose the use of the bilateral filter for the high-pass filtering step. The bilateral filter is essentially a Gaussian filter that stops smoothing at boundaries. We show that the bilateral filter improves image quality at the brain's surface, without sacrificing contrast within the brain.     

Excess molar volumes of binary mixtures of aliphatic alcohols (C1-C5) with Nitromethane over the temperature range 293.15 to 308.15 K: Application of the ERAS model and cubic EOS

Densities were measured for the binary mixtures of methanol, ethanol, 1-propanol, 1-butanol with nitromethane at temperatures (293.15, 298.15, 303.15 and 308.15) K and for 1-pentanol with nitromethane at temperatures (303.15 and 308.15) K and atmospheric pressure. Densities were determined using a vibrating-tube densimeter. Excess molar volumes as a function of mole fraction were derived, and the computed results were fitted to the Redlich-Kister equation. Excess molar volumes of mixtures studied were consistently described by the ERAS model. Also The Peng-Robinson-Stryjek-Vera (PRSV) equation of state was applied, in combination with simple mixing rules.     

Electrically enhanced liquid‐phase microextraction of three textile azo dyes from wastewater and plant samples

An electromembrane extraction procedure coupled with HPLC and visible detection was applied for the extraction of three textile azo dyes as organic salts. The extraction parameters such as extraction time, applied voltage, pH range, and concentration of salt added were optimized. A driving force of 60 V was applied to extract the analytes through 2‐nitrophenyl octyl ether, used as the supported liquid membrane, into a neutral aqueous solution. This method required 20 min extraction time from a neutral sample solution. The proposed microextraction technique provided good linearity with correlation coefficients from 0.996 to 0.998 over a concentration range of 1.0–1000.0 ng/mL. The LODs of dyes were 0.30–0.75 ng/mL, while the reproducibility ranged from 6.7 to 12.9% (n = 6). Also, enrichment factors of 96–162 that corresponded to the recoveries ranging from 48 to 81% were achieved. Finally, the application of this new method was demonstrated on wastewater samples and some plants grown in contaminated environments. Excellent selectivity was obtained as no interfering peaks were detected.     

Electrochemical Investigation of Cytochrome c Immobilized onto Self‐Assembled Monolayer of Captopril

The electrochemical behavior of cytochrome c (cyt‐c) that was electrostatically immobilized onto a self‐assembled monolayer (SAM) of captopril (capt) on a gold electrode has been investigated. Cyclic voltammetry, scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy were employed to evaluate the blocking property of the capt SAM. SECM was used to measure the bimolecular electron transfer (ET) kinetics (k_BI) between a solution‐based redox probe and the immobilized protein. In addition, the tunneling ET between the immobilized protein and the underlying gold electrode was calculated. A k_BI value of (5.0±0.6)×10⁸ mol^?1 cm³ s^?1 for the bimolecular ET and a standard tunneling rate constant (k⁰) of 46.4±0.2 s^?1 for the tunneling ET have been obtained.     

Hybrid-Density Functional Theory Study and Natural Bond Orbital Interpretation of the Conformational Behavior of 1,3-Dioxanyl, 1,3-Dithianyl,and 1,3-Diselenanyl Carbanions

Abstract

The effective factors on the conformational properties of 1,3-dioxanyl (1), -dithianyl (2), and -diselenanyl (3) carbanions have been investigated by means of the hybrid-density functional theory (DFT) (B3LYP/6-311+G**)-based method and natural bond orbital (NBO) interpretation. The results obtained showed that the axial conformation (i.e., the axial H atom attached to C₂) of carbanion 1 is more stable than its equatorial conformation. Contrary to the carbanion 1, the equatorial conformations of carbanions 2 and 3 are more stable than their corresponding axial conformations. The instability of the axial conformations of carbanions 1–3 increases from carbanion 1 to carbanion 2 but decreases from carbanion 2 to carbanion 3. The NBO analysis showed that the anomeric effect (AE) associated with the electron delocalization increases from carbanion 1 to carbanion 2, but decreases from carbanion 2 to carbanion 3. The calculated total dipole moment values of the axial conformations of carbanions 1–3 are greater than those of their corresponding equatorial conformations, but the calculated total dipole moment difference values between the axial and equatorial conformations decreases from carbanion 1 to carbanion 3. Consequently, the AE associated with the electron delocalization, but not the total dipole moment changes (i.e., Δμ_ax–eq), thus explaining the total energy differences between the axial and equatorial conformations of carbanions 1–3. The correlations between the AE, dipole moments, ΔG_ax–eq, structural parameters, and conformational behaviors of carbanions 1–3 have been investigated.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.