Preparation of dehydrated powder of hemoglobin vesicles

The carbonyl hemoglobin (CO-Hb), which was used to prevent denaturation (metHb) during the preparation of samples, was encapsulated into lipid vesicles constituted from unsaturated phospholipid, cholesterol and unsaturated fatty acid. Unsaturated components were polymerized by γ-irradiation to enhance the stability of bilayer membrane. An aqueous dispersion of resulting Hb vesicles was freeze-dried in the presence of saccharides (50–200 mM) to obtain a dehydrated powder of Hb vesicles. Change in the vesicle size, the leakage of encapsulated Hb and the oxidation of Hb to metHb were not observed. Therefore, the long-term storage of Hb vesicles can be realized as a dry powder.     

2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

Controlled synthesis and magnetic properties of 2D and 3D iron azide networks infinity2[Fe(N3)2(4,4'-bpy)] and infinity3[Fe(N3)2(4,4'-bpy)

Controlled synthesis of transition metal complexes with mixed ligands has led to two new compounds with the same empirical formula [Fe(N3)2(4,4'-bpy)] (4,4'-bpy=4,4'- bipyridine). The compound 2D-[Fe(N3)2(4,4'-bpy)] (I) contains end-on (EO) bridging azido ligands. It crystallizes in the orthorhombic crystal system, space group Cmmm (No. 65): a=11.444(2) A, b=15.181(3) A, c=3.458(1) A, V=600.8(2) A(3), and Z=2. The compound 3D-[Fe(N3)2(4,4'-bpy)] (II) contains end-to-end (EE) azido bridges. It belongs to the tetragonal crystal system, space group P4(1)2(1)2 (No. 92): a=8.132(1) A, b=8.132(1) A, c=16.708(3) A, V=1104.9(5) A(3), and Z=4. Crystals of I and II have been grown by the diffusion method. Phase-pure samples of both compounds have been obtained by means of an optimal solution synthesis. Spontaneous long-range magnetic ordering was found in both I and II, with I being a metamagnet, and II being a ferromagnet. For I, in the low-field region, multiple transitions at TN1=20 K and TN2=5 K were observed, and these indicated the existence of Fe moment reorientation. Heat capacity measurements on II confirmed ferromagnetic transition at TC=20 K.     

A chiral porous 3D metal-organic framework with an unprecedented 4-connected network topology

A novel homochiral 3D metal-organic framework [CdL2(H2O)2][ClO4]2.2DMF.3EtOH.5/3H2O, 1, (L =(R)-6,6-dichloro-2,2-diethoxy-1,1-binaphthyl-4,4-bipyridine) exhibits an unprecedented 4-connected network topology owing to the cis- configuration of the Cd coordination and possesses permanent porosity as demonstrated by TGA, XRPD, and CO2 adsorption isotherm studies.     

Reactivity of [CpCr(CO)3]2 towards thione (CS) moieties in some sulfur-containing substrates

The reaction of [CpCr(CO)₃]₂ (Cp = η⁵-C₅H₅) (1) with 1 mol equivalent of 2,5-dimercapto-1,3,4-thiadiazole (DMcTH₂) at ambient temperature led to the isolation of a reddish-brown crystalline solid of CpCr(CO)₃(η¹-DMcTH) (5) and a green solid of CpCr(CO)₃H (2) in yields of ca. 28% and 30%, respectively, along with some [CpCr(CO)₂]₂ (3) and [CpCr(CO)₂]₂S (4). The reaction of 1 with 1 mol equivalent of vinylene trithiocarbonate (SCS(CH)₂S) (VTTC) at 90 °C led to the isolation of a red crystalline solid of CpCr(CO)₂(η²-SCHSC₂H₂) (6) in ca. 15% yield while the reaction of 1 with isopropylxanthic disulfide ((CH₃)₂CHOCS₂)₂ resulted in the formation of CpCr(CO)₂(η²-S₂COCH(CH₃)₂) (8) in ca. 80% yield. The complexes 5, 6 and 8 have been determined by single crystal X-ray diffraction analysis.     

Laser action of C,N, O,F, Cl,and Br in hollow cathode discharges

C, N, O, F, Cl, and Br red and infrared laser emission was investigated using hollow cathode discharges in gas mixtures of helium and molecules containing the corresponding atoms. A total of 33 laser lines with wavelengths from 0.7 to 2.0m was observed. Three laser lines of atomic C, five laser lines of atomic N, two laser lines of atomic Cl and five laser lines of atomic Br were observed for the first time. Dissociation charge transfer and dissociative excitation transfer are suggested as being responsible for populating the upper laser levels.     

SYNTHESIS AND POLYMERIZATION OF ALIPHATIC TERTIARY AMINO-GROUP N-SUBSTITUTED ACRYLAMIDES

Aliphatic tertiary amino-group N-substituted acrylamides, N-acryl-N′-methylpiperazine (AMP)and N-methacryl-N′-methylpiperazine (MAMP) were synthesized directly from N-methylpiperazinewith corresponding acryloyl chlorides and characterized by elementary analysis of their picrates,~1H-NMR, IR and MS. AMP did not polymerize with benzoyl peroxide (BPO), but could poly-merize with lauroyl peroxide (LPO). The rate equation of the polymerization was given as R_P=K_P [AMP]~(1.5)[LPO]~(0.5) and the overall activation energy of this polymerization system was 10.8Kcal/mol. The redox nature of LPO with the monomer itself was suggested. Even though AMP and MAMP hardly proceed the polymerization initiated with BPO, butunder lower concentration would form redox system with BPO to initiate the polymerization of MMAreadily. The rate equation of the polymerization of MMA initiated with MAMP-BPO systemwas given as R_P=K_P [MMA] [MAMP}~(0.5) [BPO]~(0.5) and the overall activation energy was 10.2Kcal/mol. The analysis of the obtained polymers confirmed that MAMP not only initiated the poly-merization of MMA by combining with BPO, but also took part in the polymer chains impartingthem with better biocompatibility.     

N—乙基—N—苄基苯胺合成方法的改进

以苯胺和乙醇为原料，采用ＲａｎｅｙＮｉ为催化剂，合成了Ｎ－乙基苯胺，再在相转移催化剂作用下，经苄基化反应得到标题化合物，第一步合成方法的收率比通常方法的收率提高约３０％。     

116例冠心病患者血清中铜铬锰钴镍钒含量的探讨

测定了１１６例冠心病患者血清中铜、铬、锰、钴、镍、钒的含量并与正常值比较，显示含量升高才是有铬和镍，降低者有钴和钒、无差异者有铜和锰。     

Electrochemical study of bergenin on a poly(4-(2-pyridylazo)-resorcinol) modified glassy carbon electrode and its determination in tablets and urine

A very sensitive electroanalytical method was employed to determine bergenin in phosphate buffer with a pH of 6.0, bergenin was accumulated at a 4-(2-pyridylazo)-resorcinol (PAR) polymer film modified glassy carbon electrode (GCE) surface under the condition of open-circuit. In the following anodic sweep from −0.4 to 0.8 V, bergenin adsorbed at the PAR polymer film modified electrode surface, was oxidized and yielded a sensitive oxidation peak at 0.595 V. Due to its unique structure and extraordinary properties, the PAR polymer film shows higher accumulation efficiency toward bergenin compared with a bare GCE. Hence, the amount of bergenin at the PAR polymer film modified GCE surface increases significantly, and finally the oxidation peak current improves greatly. The experimental conditions, such as supporting electrolyte, pH value, accumulation time and scan rate, were optimized for the measurement of bergenin, and a sensitive electroanalytical method was proposed for bergenin determination. The oxidation peak current varies linearly with the concentration of bergenin over the range of 2.0 × 10⁻⁷ to 1.2 × 10⁻⁵ mol/L, and the detection limit is 2.0 × 10⁻⁸ mol/L after 3 min open-circuit accumulation. The relative standard deviation of the same electrode in 10 successive scans is 1.8% for 1.0 × 10⁻⁶ mol/L bergenin and 2.1% for interelectrodes, indicating excellent reproducibility. This new method was successfully demonstrated with bergenin tablets and diluted urine.