旋转对称非球面自动加工控制算法研究

介绍了计算机控制光学表面成型（ＣＣＯＳ） 技术的基本原理,对双旋转磨头的去除函数进行研究,研究了不同形状的磨头的去除函数特性,并在多次实验的基础上得到了最优的加工参数,在去除函数的基础上提出了模板函数的概念及算法。根据加工旋转对称非球面光学表面的特点,结合模板函数提出了一种基于同心圆磨头运动轨迹的控制算法。运用该算法对神光Ⅲ号打靶非球面透镜的一种工艺试样（ Φ３００ｍ ｍ ,Ｆ５－９ ,最大非球面度为４６μｍ） 进行自动加工,面型精度达到１λ（ＲＭＳ,λ＝ ６３２－８ｎｍ）,取得了满意的结果。     

新型永久光谱烧孔材料及机理研究

利用永久光谱烧孔(Persistent spectral hole burning(PSHB))可使光学信息存储密度提高三个数量级以上[1].这一重要应用前景激励科学家探索和寻求具有较高的非均匀(inhomogeneous)线宽与均匀(homogeneous)线宽之比(决定存储密度)和可擦除性(erasable)新型光谱烧孔材料.有机材料易于进行分子设计和组装,是较理想的光存储(optical storage)材料.     

Oxide magnetic semiconductors： Materials, properties, and devices

We give a brief introduction to the oxide （ZnO, TiO2, In2O3, SnO2, etc.）-based magnetic semiconductors from fundamental material aspects through fascinating magnetic, transport, and optical properties, particularly at room temperature, to promising device applications. The origin of the observed ferromagnetism is also discussed, with a special focus on first-principles investigations of the exchange interactions between transition metal dopants in oxide-based magnetic semiconductors.     

自旋为1的三粒子Heisenberg XXX链中杂质对热纠缠的影响

采用纠缠的度量方法Negativity研究了匀强磁场下自旋为l的含杂质三粒子HeisellhergXXX链的热纠缠特性.通过计算系统的杂质位与其余部分间的两体纠缠N1-23及正常位与其余部分间的两体纠缠N12-3,发现纠缠存在的临界温度T.的改变来自杂质参数J1的变化,随杂质参数J1,的增加而增加,外界磁场B的存在会降低纠缠值,但并不会改变临界温度.可以通过调节杂质参数J1和外界磁场B来控制两体纠缠N1-23,和N12-3的大小.     

Segmentation of synthetic aperture radar image using multiscale information measure-based spectral clustering

A multiscale information measure （MIM）, calculable from per-pixel wavelet coefficients, but relying on global statistics of synthetic aperture radar （SAR） image, is proposed. It fully exploits the variations in speckle pattern when the image resolution varies from course to fine, thus it can capture the intrinsic texture of the scene backscatter and the texture due to speckle simultaneously. Graph spectral segmen- tation methods based on MIM and the usual similarity measure are carried out on two real SAR images. Experimental results show that MIM can characterize texture information of SAR image more effectively than the commonly used similarity measure.     

光栅压缩器中色散的矩阵计算

在ABCD矩阵基础上,通过引入角度色散项获得了可以方便描述色散系统的3×3阶矩阵.采用这种矩阵方程方便、准确地计算了标准光栅对压缩器中的二阶、三阶以及四阶色散,得到的结果与由常规积分法获得的结果相同.     

液芯光纤中溶液吸收和荧光的性质对CS2受激拉曼散射阈值的影响

利用液芯光纤技术研究了不同浓度的β-Carotene的CS2溶液的吸收与荧光的特性对CS2的一、二阶Stokes谱线阈值的影响.实验发现随溶液浓度(10-8-10-6 mol/L)增加,CS2的一阶Stokes谱线的激发阈值相对变高;并且与纯CCS2芯液的受激拉曼散射相比较,在低抽运能量激发下,就观察到CS2的二阶Stokes谱线.这主要是由于在CS2的受激拉曼谱线产生的过程中,β-Carotene的CS2溶液的吸收和荧光共同影响了CS2的一、二阶Stokes谱线的阈值.我们进行了理论上的拟合与分析,其结果与实验符合很好.     

Thermal noise limit in measuring the gravitational constant G using the angular acceleration method and the dynamic deflection method

A general comparison is made between two methods of measuring the gravitational constant G. The angular acceleration method can avoid the anelasticity effect since the torsion fiber is not twisted. The dynamic deflection method is similar in principle but it does not use feedback, therefore a major noise introduced by the feedback control system in the angular acceleration method can be avoided. Both methods have their advantages and can be performed with the same device. Based on different expressions of G, we have expressed the signal-to-noise ratio and calculated the thermal noise limit for both methods. In order to get a lower thermal noise limit, the dynamic deflection method should avoid resonance.     

润滑油对基于制冷循环的喷雾冷却系统性能的影响

针对高功率固体激光器的散热需求,设计了一种基于制冷循环的喷雾冷却系统,并对其换热性能进行研究。由于制冷系统的压缩机需要润滑,冷却液中不可避免地会混有润滑油。润滑油会对冷却液的粘度、表面张力产生影响,并可能产生油膜,从而对冷却液的换热过程产生强化或抑制。因此,通过实验研究,分析了润滑油对喷雾冷却换热性能的影响。实验结果表明,冷却液中存在润滑油,会增大冷却液流经喷嘴过程中的阻力,减小流量,但根据本系统的应用情况,可以忽略;在低热流密度时,含有一定量的润滑油更有利于热源表面温度的均匀分布,高热流密度时,2%(质量分数)的含油量对温度分布不均的影响可以忽略;润滑油的存在可以提高临界热流密度,使得系统的散热能力得到提高,更有利于其在高功率固体激光器散热领域的应用。     

Subwavelength-resolution direct writing using submicron-diameter fibers

<正>A novel direct writing technique using submicron-diameter fibers is presented.This technique adopts contact mode in the process of writing,and submicron lines with different widths have been obtained. Experimental results demonstrate that the resolution of this technique can be smaller than the exposure wavelength of 442 nm,and 380-nm-wide line is achieved.In addition,the distribution of light fields in the photoresist layer is analyzed by finite-difference time-domain method.