增强的UV-B辐射对高粱幼苗光合和抗氧化系统的影响

由于臭氧层逐渐变薄,到达地球表面UV-B辐射不断增加,因UV-B辐射改变的太阳光谱将会对陆地植物造成不同程度的伤害。本试验以高粱龙杂5为材料,对二叶一心高粱进行四种剂量UV-B处理,恢复2 d采用光合仪测定光合参数,并取样测定抗氧化酶活性。随着UV-B剂量的升高,高粱叶片褐化损伤加重,植株矮化,鲜重和干重显著降低;花青素含量显著升高,叶绿素和类胡萝卜素含量显著减少,净光合速率和叶绿素荧光参数显著下降。同时,随UV-B剂量升高,高粱幼苗气孔导度、胞间CO₂浓度和蒸腾速率表现为“降-升-降”变化;POD和CAT活性呈现“降-升-降”变化;SOD和GR活性呈现“降-升”变化,APX和GPX呈现“升-降-升”变化。在供试的四种剂量中,UV-B处理6 h(相当2.4 J·m-2)的高粱幼苗净光合急剧下降,其他光合指标以及抗氧化酶活性也表现出明显转折。结果表明,增强的UV-B辐射直接导致高粱光合色素、净光合速率和叶绿素荧光参数的改变;高粱抗氧化系统对高、低剂量UV-B响应机制不同, 其中 ASA-GSH循环对低剂量UV-B反应更敏感,高剂量UV-B辐射不仅破坏高粱光合作用,而且启动植物酶促和非酶抗氧化系统,导致叶片褐化坏死,植株生物量累积减少、株高矮化,甚至死亡。     

生地当归药队煎剂的表面增强拉曼散射光谱

为揭示单味煎剂与方剂间的关系,分别测试分析了生地当归药队、单味药生地和单味药当归煎剂的表面增强拉曼散射(surface-enhanced Raman scattering, SERS)光谱,并对其进行谱峰归属。本文主要针对存在于三种煎剂中的17个拉曼信号(538,622,732,761,835,876,959,1 145,1 245,1 276,1 326,1 402, 1 456,1 470,1 518,1 546和1 605 cm-1)进行讨论。生地当归药队煎剂SERS光谱在538,732,761,835,876,959,1 145,1 245,1 276,1 326,1 402,1 456,1 470,1 518和1 605 cm-1处,出现15个明显的拉曼信号;生地煎剂SERS光谱在538,761,835,876,959,1 145,1 245,1 276,1 326,1 402,1 470,1 518和1 546 cm-1处,出现13个明显的拉曼信号;当归煎剂SERS光谱在538,622,732,761,835,876,959,1 245,1 326和1 402 cm-1处,出现10个明显的拉曼信号。生地当归药队煎剂SERS光谱保留了和未观察到生地和当归单味煎剂的某些拉曼峰,且产生了生地和当归单味煎剂中所没有的拉曼信号(1 456和1 605 cm-1),即产生新药物成分。生地当归药队煎剂所包含的药物成分并非是生地和当归单味药物煎剂所含药物成分的简单相加。结果表明,SERS光谱可能为方剂研究提供一种高灵敏度、快速准确和操作简单的检测方法。     

A novel carbon source coated on C-LiFePO<Subscript>4</Subscript> as a cathode material for lithium-ion batteries

The poor electronic conductivity and low lithium-ion diffusion are the two major obstacles to the largely commercial application of LiFePO₄ cathode material in power batteries. In order to improve the defects of LiFePO₄, a novel carbon source polyacrylonitrile (PAN), which would form the hierarchical porous structure after carbonization, is fabricated and used. This work comes up with a simple and facile carbothermal reduction method to prepare porous-carbon-coated LiFePO₄ (C-LiFePO₄-PC) composite and to study the effect of carbon-coated temperature on ameliorating the electrochemical performance. The obtained C-LiFePO₄-PC composite shows a high initial discharge capacity of 164.1 mA h g^?1 at 0.1 C and good cycling stability as well as excellent rate capacity (49.0 mA h g^?1 at 50 C). The most possible factors that improve the electrochemical performance could be related to the enhancement of electronic conductivity and the existence of porous carbon layers. In a word, the C-LiFePO₄-PC material would become an excellent candidate for application in the fields of lithium-ion batteries.     

35MeV/u 40 Ar+197 Au反应中热核的碎裂密度

许多提取核反应过程中熵产生的方法只适用于高能核反应过程 ,而约化d的产额方法可以用于较低能量的重离子核反应中 .对于 3 5MeV/u40 Ar+ 197Au的核反应过程 ,利用这种方法所得的熵和约化带电粒子多重性提取的熵结果一致 .对于后角热核发射体系 ,实验提取的核温度为 ( 4.7± 1 .2 )MeV ,熵为S/A =2 .5± 0 .5,根据实验提取的熵和核温度可以确定其碎裂密度小于 0 .1 ρ0     

次条纹积分干涉计量

叙述了次条纹积分干涉干时的原理，仅用一幅光载频干涉纹图获取全部位相信息。先用分段积分法求出条纹初始位相，再由最小二乘原理，迭代出信息的位相解。并讨论了条纹位相的算法，误差修正和测量面形的应用。     

Back focal plane imaging of Tamm plasmons and their coupled emission

The unique optical properties of Tamm plasmons (TPs) – such as flexible wavevector matching conditions including inplane wavevector within the light line, and existing both S‐ and P‐polarized TPs − facilitate them for direct optical excitation. The Tamm plasmon‐coupled emission (TPCE) from a combined photonic–plasmonic structure sustaining both surface plasmons (SPs) and TPs is described in this paper. The sensitivity of TPCE to the emission wavelength and polarization is examined with back focal plane imaging and verified with the numerical calculations. The results reveal that the excited probe can couple with both TPs and SPs, resulting in surface plasmon‐coupled emission (SPCE) and TPCE, respectively. The TPCE angle is strongly dependent on the wavelength allowing for spectral resolution using different observation angles. These Tamm structures provide a new tool to control the optical emission from dye molecules and have many potential applications in fluorescence‐based sensing and imaging.     

Material growth and device fabrication of terahertz quantum-cascade laser based on bound-to-continuum structure

The terahertz quantum-cascade laser （THz QCL） based on bound-to-continuum structure is demonstrated. The X-ray diffraction measurement of the material shows a high crystalline quality of the active region. A THz QCL device was fabricated with semi-insulating surface-plasmon waveguide. The test device is lasing at about 3 THz and operating up to 60 K. It shows a single frequency property under different drive currents and temperatures. At 9 K, the maximum output power is greater than 2 mW with a threshold current density of 159 A/cm2.     

基于连续光谱分析的在线水质检测信号处理研究

在线光谱水质检测仪器是现代水资源环境监测技术的重要发展方向之一,具有多参数监测和准确度高、重复性好的技术优势,然在线被测水样的光谱信号处理是其关键核心技术,为此,基于连续光谱分析,建立了在线被测水样光谱测量信号的数学模型,提出了基于双波长光强比值不变性的光谱测量信号系统误差处理方法,并结合小波多分辨率滤波噪声处理技术,系统研究了基于在线被测水质参数光谱特征的背景干扰处理方法。以上信号处理方法应用于自主研制的多参数光谱水质监测仪器,在线检测标准环境水样及实际环境水样中的化学需氧量、六价铬和阴离子表面活性剂等水质参数,并与国家标准分析方法展开了现场对比测试,仪器的关键参数重复性(相对标准偏差RSD≤10%)与准确度(实际水样比对试验相对误差A≤10%)均达到并优于国家环境保护技术标准要求,表明该信号处理方法能够有效消除在线水质检测光谱测量信号的系统误差及噪声与背景干扰,对于提升光谱水质监测仪器的技术性能具有重要的作用。     

恒热流加热开口腔自然对流的可视化实验和数值模拟

本文采用激光全息干涉和激光片光照射烟可视化方法获得了恒热流加热的二维开口腔自然对流问题的温度场和流场,并进行了数值分析.实验结果与数值模拟结果吻合.数值计算表明方腔内流体的流通量与Ra*和深高比B有关,当Ra*＞104时随深高比B增加流通量增加;B×Nu与深高比B呈线性关系.利用B×Nu与深高比B的线性关系,通过引入当量导热系数λc,本文还给出了加热壁面的平均温度的简单计算方法.