Isolation and Crystallographic Characterization of the Labile Isomer of Y@C82 Cocrystallized with Ni(OEP): Unprecedented Dimerization of Pristine Metallofullerenes

Although the major isomers of M@C₈₂ (namely M@C_2v(9)‐C₈₂, where M is a trivalent rare‐earth metal) have been intensively investigated, the lability of the minor isomers has meant that they have been little studied. Herein, the first isolation and crystallographic characterization of the minor Y@C₈₂ isomer, unambiguously assigned as Y@C_s(6)‐C₈₂ by cocrystallization with Ni(octaethylporphyrin), is reported. Unexpectedly, a regioselective dimerization is observed in the crystalline state of Y@C_s(6)‐C₈₂. In sharp contrast, no dimerization occurs for the major isomer Y@C_2v(9)‐C₈₂ under the same conditions, indicating a cage‐symmetry‐induced dimerization process. Further experimental and theoretical results disclose that the regioselective dimer formation is a consequence of the localization of high spin density on a special cage‐carbon atom of Y@C_s(6)‐C₈₂ which is caused by the steady displacement of the Y atom inside the C_s(6)‐C₈₂ cage.     

Control of EOF in CE by different ways of application of radial electric field

Various ways of application of radial electric field for the control of electrokinetic potential and EOF in a home-made device for CE are presented. The device comprises three high-voltage power supplies, which are used to form a radial electric field across the fused-silica capillary wall. One power supply provides the internal electric field - a driving force for electrophoretic migration of charged analytes and for the EOF. Two power supplies are connected to the ends of the outer low-conductivity polymeric coating, which is formed by the dispersion of insoluble conductive copolymer of aniline and p-phenylendiamine in polystyrene matrix (dissolved in N-methylpyrrolidone) attached to the original outer polyimide coating of the capillary. They are able to constitute the external longitudinal electric field with variable values of electric potential at both ends of the outer coating. The potential gradient between the external and internal electric field is perpendicular to the capillary wall and forms a radial electric field across the capillary wall, which affects the electrokinetic potential at the solid-liquid interface and EOF inside the capillary. The developed device and methodology has been applied for the analysis of both chiral and achiral molecules such as terbutaline enantiomers and oligopeptides (diglycine and triglycine). The effect of magnitude, orientation, and different ways of application of the radial electric field on the flow rate of the EOF and on the speed, efficiency, and resolution of CZE separations of the above analytes in the internally noncoated fused-silica capillaries have been evaluated.     

The sixteen CB(11)H(n)Me(12-n)(-) anions with fivefold substitution symmetry: anodic oxidation and electronic structure

The 15 symmetrically methylated derivatives of the CB11H12(-) anion (1a) have been synthesized and found to vary greatly in ease of oxidation. Cyclic voltammetry in liquid SO2 yielded fully reversible oxidation potentials for five of those that have no adjacent unsubstituted vertices in positions 7-12; three others showed some indication of reversibility. The anions 1a-16a and the Jahn-Teller distorted neutral radicals 1r-16r have been characterized by ab initio and density functional theory calculations. In the state average CASSCF(13,12)/6-31+G* approximation, the ground state potential energy surface of 1r contains five symmetry-related pairs of minima. The computational results account for the reversible redox potentials very well when the solvent is included explicitly (RI-DFT(BP)/TZVP, COSMO). For display and for a semiquantitative understanding of methyl substituent effects in terms of perturbation theory, the molecular orbitals of 1a have been expressed in the symmetry-adapted cluster basis. The results serve as an underpinning for a set of additive empirical increments for redox potential prediction. Relative to the usual hydrogen standard, a single methyl group facilitates oxidation by approximately 50, 70, 70, and 10 mV in positions 1, 2, 7, and 12, respectively. This electron donor effect on the redox potential is due to a contribution, whereas those of (inductive and direct field) type are negligible.     

Interpretation of synchrotron radiation circular dichroism spectra of anionic, cationic, and zwitterionic dialanine forms

Electronic absorption and synchrotron radiation circular dichroism (SRCD) spectra of the anionic, cationic, and zwitterionic forms of L-alanyl-L-alanine (AA) in aqueous solutions were measured and interpreted by molecular dynamics (MD) and ab initio computations. Time-dependent density functional theory (TD DFT) was applied to predict the electronic excited states. The modeling enabled the assessment of the role of molecular conformation, charge, and interaction with the polar environment in the formation of the spectral shapes. Particularly, inclusion of explicit solvent molecules in the computations appeared to be imperative because of the participation of water orbitals in the amide electronic structure. Implicit dielectric continuum solvent models gave inferior results for clusters, especially at low-energy transitions. Because of the dispersion of transition energies, tens of water/AA clusters had to be averaged in order to obtain reasonable spectral shapes with a more realistic inhomogeneous broadening. The modeling explained most of the observed differences, as the anionic and zwitterionic SRCD spectra were similar and significantly different from the cationic spectrum. The greatest deviation between the experimental and theoretical curves observed for the lowest-energy negative anion signal can be explained by the limited precision of the TD DFT method, but also by the complex dynamics of the amine group. The results also indicate that differences in the experimental spectral shapes do not directly correlate with the peptide main-chain conformation. Future peptide and protein conformational studies based on circular dichroic spectroscopy can be reliable only if such effects of molecular dynamics, solvent structure, and polar solvent-solute interactions are taken into account.     

Simultaneous liquid chromatographic determination of metals and organic compounds in pharmaceutical and food-supplement formulations using evaporative light scattering detection

A novel method for the non-derivatization liquid chromatographic determination of metals (potassium, aluminium, calcium and magnesium) and organic compounds (ascorbate and aspartate) was developed and validated based on evaporative light scattering detection (ELSD). Separation of calcium, magnesium and aluminium was achieved by the cation exchange column Dionex CS-14 and an aqueous TFA mobile phase according to the following time program: 0-6 min TFA 0.96 mL L⁻¹, 6-7 min linear gradient from TFA 0.96-6.4 mL L⁻¹. Separation of potassium, magnesium and aspartate was achieved by the lipophilic C₁₈ Waters Spherisorb column and isocratic aqueous 0.2 mL L⁻¹ TFA mobile phase. Separation of sodium, magnesium, ascorbate and citrate was also achieved by the C₁₈ analytical column, according to the following elution program: 0-2.5 min aqueous nonafluoropentanoic acid (NFPA) 0.5 mL L⁻¹; 2.5-3.5 min linear gradient from 0.5 mL L⁻¹ NFPA to 1.0 mL L⁻¹ TFA. In all cases, evaporation temperature was 70 °C, pressure of the nebulizing gas (nitrogen) 3.5 bar, gain 11 and the flow rate 1.0 mL min⁻¹. Resolution among calcium and magnesium was 1.8, while for all other separations was ≥3.2. Double logarithmic calibration curves were obtained within various ranges from 3-24 to 34-132 μg mL⁻¹, and with good correlation (r > 0.996). Asymmetry factor ranged from 0.9 to 1.9 and limit of detection from 1.3 (magnesium) to 17 μg mL⁻¹ (ascorbate).The developed method was applied for the assay of potassium, magnesium, calcium, aluminium, aspartate and ascorbate in pharmaceuticals and food-supplements. The accuracy of the method was evaluated using spiked samples (%recovery 95-105%, %R.S.D. < 2) and the absence of constant or proportional errors was confirmed by dilution experiments.     

Surface-induced dissociation and chemical reactions of C2D 4 + on stainless steel, carbon (HOPG), and two different diamond surfaces

Surface-induced interactions of the projectile ion C₂D₄⁺ with room-temperature (hydrocarbon covered) stainless steel, carbon highly oriented pyrolytic graphite (HOPG), and two different types of diamond surfaces (O-terminated and H-terminated) were investigated over the range of incident energies from a few eV up to 50 eV. The relative abundance of the product ions in dependence on the incident energy of the projectile ion [collision-energy resolved mass spectra, (CERMS) curves] was determined. The product ion mass spectra contained ions resulting from direct dissociation of the projectile ions, from chemical reactions with the hydrocarbons on the surface, and (to a small extent) from sputtering of the surface material. Sputtering of the surface layer by low-energy Ar⁺ ions (5–400 eV) indicated the presence of hydrocarbons on all studied surfaces. The CERMS curves of the product ions were analyzed to obtain both CERMS curves for the products of direct surface-induced dissociation of the projectile ion and CERMS curves of products of surface reactions. From the former, the fraction of energy converted in the surface collision into the internal excitation of the projectile ion was estimated as 10% of the incident energy. The internal energy of the surface-excited projectile ions was very similar for all studied surfaces. The H-terminated room-temperature diamond surface differed from the other surfaces only in the fraction of product ions formed in H-atom transfer surface reactions (45% of all product ions formed versus 70% on the other surfaces).     

Infrared spectroscopy and optical constants of porous amorphous solid water

Reflection-absorption infrared spectra (RAIRS) of amorphous solid water (ASW) films grown at 20 K on a Pt(111) substrate at various angles (theta(Beam) = 0-85 degrees ) using a molecular beam are reported. They display complex features arising from the interplay between refraction, absorption within the sample, and interference effects between the multiple reflections at the film-substrate and film-vacuum interfaces. Using a simple classical optics model based on Fresnel equations, we obtain optical constants [i.e., n(omega) and k(omega)] for porous ASW in the 1000-4000 cm(-1) (10-2.5 microm) range. The behavior of the optical properties of ASW in the intramolecular OH stretching region with increasing theta(Beam) is shown to be strongly correlated with its decreasing density and increasing surface area. A direct comparison between the RAIRS and calculated vibrational spectra shows a large difference ( approximately 200 cm(-1)) in the position of the coupled H-bonded intramolecular OH stretching vibrations spectral feature. Moreover, this band shifts in opposite directions with increasing theta(Beam) in RAIRS and vibrational spectra demonstrating RAIRS spectra cannot be interpreted straightforwardly as vibrational spectra due to severe optical distortions from refraction and interference effects.     

Chlorine isotope fractionation of a semi-volatile organochlorine compound during preparative megabore-column capillary gas chromatography

Chlorine isotope fractionation during preparative capillary gas chromatography (pcGC) was investigated using 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) as a model compound for semi-volatile organochlorine (OCl) molecules. Chlorine isotope analysis by thermal ionization mass spectrometry revealed no significant alteration of the chlorine isotope composition when the whole peaks were collected in pcGC (delta37Cl -3.2 per thousand versus -3.6 per thousand for the unprocessed DDT, +/-0.5 per thousand SD). However, distinct isotope fractionations were measured for the front (delta37Cl -5.1 per thousand) and tail (delta37Cl -1.8 per thousand) segments of partially collected samples. Isolation of individual OCls by pcGC enables accurate off-line chlorine isotope analysis, and thus facilitates the investigation of naturally occurring OCls.     

Chemical understanding of carbide cluster metallofullerenes: a case study on Sc2C2@C2v(5)-C80 with complete X-ray crystallographic characterizations

Little is known about the chemical properties of carbide cluster metallofullerenes (CCMFs). Here we report the photochemical reaction of a newly assigned CCMF Sc(2)C(2)@C(2v)(5)-C(80) with 2-adamantane-2,3-[3H]-diazirine (AdN(2), 1), which provides a carbene reagent under irradiation. Five monoadduct isomers (2a-2e), with respective abundances of 20%, 40%, 25%, 5%, and 10%, were isolated and characterized with a combination of experimental techniques including unambiguous single-crystal X-ray crystallography. Results show that the two Sc atoms of the bent Sc(2)C(2) cluster tend to move in most cases, whereas the C(2)-unit is almost fixed. Accordingly, it is difficult to explain the addition patterns by considering the strain and charge density on the cage with a fixed cluster, and thus a moving cluster may account for the addition patterns. These results show that the situation of CCMFs is more complicated than those in other metallofullerenes. Furthermore, a thermal isomerization process from 2b to 2c was observed, confirming that the most abundant isomer 2b is a kinetically favored adduct. Finally, it is revealed that the electronic and electrochemical properties of pristine Sc(2)C(2)@C(2v)(5)-C(80) have been markedly altered by exohedral modification.