Flow injection analysis : Part II. Ultrafast determination of phosphorus in plant material by continuous flow spectrophotometry

The effect of sample volume, tube length, tube diameter, peak height and sampling rate on the determination of phosphorus in acidic plant digests was investigated, and optimal conditions for the flow injection method are described. Sampling rates of 420 samples per hour were achieved without incurring problems from carryover of samples, and evidence was obtained that rates as high as 700 samples per hour are possible. The flow injection method was proved to be suitable for routine analyses and has obvious advantages over other automated or manual methods in sampling rate, simplicity of design and cost.     

Flow injection analysis for calcium in serum,water and waste waters by spectrophotometry and by ion-selective electrode

The Flow Injection technique is shown to provide fast, reliable and sensitive methods for the determination of calcium in various aqueous as well as serum samples; spectrophotometric or potentiometric detection can be used. At sampling rates of 100–110 samples per hour, with 30-μl sample injections, high reproducibility of measurement and low reagent consumption are achieved in both methods. In the spectrophotometric method, the analytical readout is available within 12 s after sample injection at a total reagent consumption of 0.75 ml per analysis. The potentiometric measurement of the calcium activity in serum is placed on a reliable basis by alternating measurements of serum samples and aqueous standards without incurring any non-reproducible changes in potential between aqueous and serum solutions. This permits the simultaneous determination of pH and pCa, the analytical readout being available within XXX s of sample injection. The good agreement between the results obtained with the Flow Injection method and those attained by atomic absorption and EDTA titrations as well as pCa stat-measurements show that the new methods are potentially suitable for routine analysis.     

Determination of imazalil by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

A simple, rapid and reproducible capillary isotachophoretic on-line coupled with capillary zone electrophoresis (CITP-CZE) method for the determination of IMz in food packaging extracts and its residues in apples is described. A good separation of the IMZ from other sample constituents was achieved within 15 minutes without any sample clean up. Method characteristics (linearity, accuracy, intra-assay and detection limit) were determined. Less amount of time involved, sufficient sensitivity and low running cost are the important attributes of CITP-CZE method.     

Extraction of microamounts of strontium by a nitrobenzene solution of bis-1,2-dicarbollylcobaltate in the presence of 15-crown-5

Extraction of⁸⁵Sr by a nitrobenzene solution of bis-1,2-dicarbollylcobaltate in the presence of 15-crown-5 (15C5, L) has been investigated. The equilibrium data and the typical maxima concerning the dependencies of the Sr distribution ratios on the analytical concentration of 15C5 in the system under study can be explained assuming that the HL⁺, HL₂ ⁺ and SrL₂ ²⁺ species are extracted into the nitrobenzene phase. The values of the corresponding extraction and stability constants of the extracted species in nitrobenzene saturated with water have been determined.     

Über Reaktionen von Nitrosophenolen, 4. Mitt.: Reaktion von Nitrosonaphtholen mit Naphtholen

Zusammenfassung Die Reaktion von 1-Nitroso-2-naphthol mit 1-und 2-Naphthol sowie die Reaktion von 2-Nitroso-1-naphthol mit 2-Naphthol in Äthanol und in Äther bei Anwesenheit von HNO₃ gibt 5H-Dibenzo[a,j]phenoxazon-(5) (I), 5H-Dibenzo[a,j]phenoxazon-(5)-14-oxid (II), 5H-Dibenzo[a,h]phenoxazon-(5) (III) sowie 5H-Dibenzo[a,h]phenoxazon-(5)-14-oxid (IV). Es wurde ein Reaktionsmechanismus vorgeschlagen und die Konstitution der hergestellten Verbindungen spektrophotometrisch und potentiometrisch bestimmt.

---

The reaction of 1-nitroso-2-naphthol with 2-and 2-naphthol and the reaction of 2-nitroso-1-naphthol with 2-naphthol in ethanol or ether in the presence of nitric acid have been studied. The main reaction products isolated were the dibenzophenoxazones I–IV. The reaction mechanism for their formation is proposed.

---

---

Mit 4 Abbildungen     

Crystal structures and magnetic properties of two low-dimensional materials constructed from [Mn(III)(salen)H2O]+ and [M(CN)8](3-/4-) (M = Mo or W) precursors

The syntheses, X-ray structures, and magnetic behaviors of two new cyano-bridged assemblies, the molecular [Mn(III)(salen)H2O]3[W(V)(CN)8].H2O (1) and one-dimensional [Mn(salen)(H2O)2]2[[Mn(salen)(H2O)][Mn(salen)]2[Mo(CN)(8)]].0.5ClO4.0.5OH.4.5H2O (2), are presented. Compound 1 crystallizes in the monoclinic system, has space group P2(1)/c, and has unit cell constants a = 13.7210(2) A, b = 20.6840(4) A, c = 20.6370(2) A, and Z = 4. Compound 2 crystallizes in the triclinic system, has space group P, and has unit cell dimensions a = 18.428(4) A, b = 18.521(3) A, c = 18.567(4) A, and Z = 2. The structure of 1 consists of the asymmetric V-shaped Mn-NC-W-NC-Mn-O(phenolate)-Mn molecules, where W(V) coordinates with [Mn(salen)H2O] and singly phenolate-bridged [Mn(salen)H2O]2 moieties through the neighboring cyano bridges. The [W(V)(CN)8]3- ion displays distorted square-antiprism geometry. The structure of 2 consists of the cyano-bridged [Mn3(III)Mo(IV)]n- repeating units linked by double phenolate bridges into one-dimensional zigzag chains. The Mn(III) centers are bound to Mo(IV) of square-antiprism geometry through the neighboring cyano bridges. The magnetic studies of 1 reveal the antiferromagnetic intramolecular interactions through the CN and phenolate bridges and the relatively weak intermolecular interactions. Compound 1 becomes antiferromagnetically ordered below TN = 4.6 K. The presence of the magnetic anisotropy is documented with the MH measurements carried out for both polycrystalline and single-crystal samples. At T = 1.9 K, the spin-flop transition is observed in the field of 18 kOe applied parallel to the bc plane, which is the easy plane of magnetization. Field dependence of magnetization of 1 shows field-induced metamagnetic behavior from the antiferromagnetic ground state of ST = 3/2 to the state of ST = 5/2. The magnetic properties of 2 indicate a weak antiferromagnetic interaction between Mn(III) centers in double-phenolate-bridged [Mn(III)(salen)]2 dinuclear subunits and a very weak ferromagnetic interaction between them through the diamagnetic [Mo(IV)(CN)8]4- spacer.     

Extraction of microamounts of yttrium from water into nitrobenzene using hydrogen dicarbollylcobaltate in the presence of 15-crown-5

Summary Extraction of microamounts of yttrium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^-) in the presence of 15-crown-5 (15C5,L) has been investigated. The equilibrium data have been explained assuming that the complexes HL⁺, HL_2,⁺, YL³⁺, YL_2,³⁺and YH_-1L_2,²⁺are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined.     

Synthesis and properties of water-soluble gold colloids covalently derivatized with neutral polymer monolayers

Citrate-capped gold nanoparticles as well as planar gold surfaces can be efficiently grafted with a covalently attached polymer monolayer a few nanometers thick, by simple contact of the metal surface with dilute aqueous solutions of hydrophilic polymers that are end-capped with disulfide moieties, as shown by UV/vis absorption, dynamic light scattering, and surface plasmon resonance studies. The hydrophilic polymer-coated gold colloids can be freeze-dried and stored as powders that can be subsequently dissolved to yield stable aqueous dispersions, even at very large concentrations. They allow for applying filtrations, gel permeation chromatography, or centrifugation. They do not suffer from undesirable nonspecific adsorption of proteins while allowing the diffusion of small species within the hydrogel surface coating. In addition, specific properties of the original hydrophilic polymers are retained such as a lower critical solution temperature. The latter feature could be useful to enhance optical responses of functionalized gold surfaces toward interaction with various substrates.     

An application of neural networks in chemistry. Prediction of13C NMR chemical shifts

Basic definitions of neural networks are given in terms of oriented graphs. Partial derivatives of an objective function with respect to the weight and threshold coefficients are derived. These derivatives are very important for the adaptation process, carried out by a version of the gradient method of We neural network considered. The stability of the adapted neural network toward small changes — perturbation — of input activities is described by sensitivities. The theory is illustrated by application of simple neural networks that reflect the topology of molecules to the classification of¹³C NMR chemical shifts of secondary carbons in acyclic alkanes.     

Determination of aristolochic acid by capillary zone electrophoresis

A simple and rapid capillary zone electrophoresis (CZE) method for the determination of aristolochic acid (AA) in dietary supplements and selected herbs is described. A clear separation of AA from other sample constituents was achieved within 5 minutes without any sample clean up. A mixture of 20 mM-morpholinethanesulphonic acid+10 mM-BisTrisPropane+0.2% hydroxyethylcelullose in 10% methanol serves as a background electrolyte. The linearity, accuracy, intra-assay and detection limit of the developed method are 200–6000 ng/mL, 95–103%, 3.5%, and 50 ng/ml, respectively. Ease of use, sufficient sensitivity and low running cost are the most important attributes of the CZE method. The proposed CZE method was compared with HPLC.