安培检测芯片毛细管电泳及其初步应用

An end-channel amperometric detector with a guide tube for working electrode was designed and integrated on a home-made glass microchip. The guide tube was directly patterned and fabricated at the end of the detection reservoir, which made the fixation and alignment of working electrode relatively easy. The fabrication was carried out in a two-step etching process. A 30 μm carbon fiber microdisk electrode and Pt cathode were also integrated onto the amperometric detector. The baseline separation of dopamine (DA), catechol (CA) and epinephrine (EP) was achieved within 80 s. Relative standard deviations of not more than 5.2% were obtained for both peak currents and migration times of DA and CA (n=5). Using standard adding method, DA in tLrine and plasma samples was detected. The recoveries were in the range of 83%—103%.     

镓(Ⅲ)-茜素氨羧络合剂在碳糊电极上的阳极吸附伏安法研究及应用

研究了镓(Ⅲ)-茜素氨羧络合剂(ALC)在碳糊电极上的阳极吸附伏安行为,并以此建立了一种高灵敏度、高选择性测定镓的吸附伏安法.在0.12 mol/L HAc-NaAc-0.24 mol/L邻苯二甲酸氢钾底液(pH 4.5)中,-0.10 V (vs.SCE) 富集90 s (或180 s),以250 mV/s扫速线性扫描至0.90 V, Ga3+-ALC在碳糊电极上产生灵敏的与ALC的峰电位相差近230 mV的吸附氧化峰,其二次导数峰电流与镓浓度在5.0×10-10～8.0×10-7 mol/L范围内呈线性关系;富集240 s检出限达3.0×10-10 mol/L(S/N=3).探讨了电极反应机理.该法用于粮食样品中镓的测定,结果满意.     

SYNTHESIS, CHARACTERIZATION, METAL-UPTAKE BEHAVIOR OF BIS（BENZIMIDAZOLE） RESIN SUPPORTED ON EPOXIDE POLYMER

The new chelate resins, abbreviated as PNBMZs and PBBMZs based on epoxide polymer, were synthesized by polycondensation of N,N-diglycidyl-4-glycidyloxyaniline or 1,4-bis（2,3-epoxypropyl）benzene with the primary amine group of 1,3-bis（benzimidazol-2yl）propylamine （BBPAH）. The ion exchangers contain 2.71-3.23 mmol of the ligand contents per gram of the resin. Batch extraction capacities were determined for the metal chloride salts in buffer solutions in the pH range from -1 to 6.0. The chelate resins were very selective for Cu^2＋, Zn^2＋, Cd^2＋ in the presence of other divalent transition metal ions. The maximum uptake capacities of PNBMZ （synthetic molar ratio = 1：1.5） under non-competitive condition were found to be 0.94 mmol/g for Cu^2＋ at pH = 2, 1.3 mmol/g for Cd^2＋ at pH = 1 and 1.75 mmol/g for Zn^2＋ at pH = -1 respectively. While in the case of PBBMZ, it was 1.39 mmol/g for Cd〉 at pH = 1. The metal-uptake behaviors for both of them showed strong pH dependence, and their extraction capacities increase with decreasing pH. The uptake of Cu^2＋ by the resin PNBMZs at pH = 1 was found to be rather fast with t1/2 = 18 min. Metal-uptake experiments under competitive conditions also confirm that the chelate resins have a high selectivity for Cu^2＋, Zn^2＋, Cd^2＋ and the contrary pH dependence.     

Knoevenagel condensation catalysed by poly（vinyl chloride） supported tetraethylenepentamine （PVC-TEPA）

Poly(vinyl chloride) supported tetraethylenepentamine (PVC-TEPA) has been found to be an efficient catalyst for the Knoevenagel condensation. A wide range of aromatic aldehydes easily undergo condensations with ethyl cyanoacetate and malononitrile in the commercial 95% ethanol in refluxing using PVC-TEPA as catalyst to afford the desired products of good purity in moderate to excellent yields. A recycling study confirmed that the catalyst could be reused, the yield of the desired condensation product were not reduced. The merits of this protocol are environmentally benign, simple operation, convenient work-up and good yields. Furthermore, the catalyst can easily be recovered and reused at five times with comparable yields.     

Catalytic Adsorptive Stripping Voltammetry of Germanium(IV) in the Presence of Gallic Acid and Vanadium(IV)‐EDTA

A highly sensitive and selective catalytic adsorptive cathodic striping procedure for the determination of trace germanium is presented. The method is based on adsorptive accumulation of the Ge(IV)‐gallic acid (GA) complex onto a hanging mercury drop electrode, followed by reduction of the adsorbed species. The reduction current is enhanced catalytically by addition of vanadium(IV)‐EDTA. The optimal experimental conditions include the use of 0.03 mol/L HClO₄ (pH1.6), 6.0×10^?3 mol/L GA, 3.0×10^?3 mol/L V(IV), 4.0×10^?3 mol/L EDTA, an accumulation potential of ?0.10 V(vs. Ag/AgCl), an accumulation time of 120 s and a differential pulse potential scan mode. The peak current is proportional to the concentration of Ge(IV) over the range of 3.0×10^?11 to 1.0×10^?8 mol/L and the detection limit is 2×10^?11 mol/L for a 120 s adsorption time. The relative standard deviation at 5.0×10^?10 mol/L level is 3.1%. No serious interferences were found. The method was applied to the determination of germanium in ore, mineral water and vegetable samples with satisfactory results.     

介绍一个绿色物理化学实验——凝固点降低法测定葡萄糖的摩尔质量

以葡萄糖-水为体系对传统的凝固点降低法测定摩尔质量实验进行了改进,以低温小钢珠代替晶种,建立了一种控制过冷深度的有效方法;利用干燥的方法解决了葡萄糖样品中结晶水不确定的问题。     

The first example of enantioselective isocyanosilylation of meso epoxides with TMSCN catalyzed by novel chiral organogallium and indium complexes

The desymmetrization ring opening of meso epoxides using trimethylsilyl cyanide catalyzed by organogallium and indium complexes with binaphthol monoether derivatives as chiral ligands gave beta-isocyanohydrins with moderate to excellent enantioselectivities of up to 95% ee.     

Mg改性对Co/γ-Al2O3-TiO2催化燃烧丙烷性能影响

采用分步浸渍法制备了系列Mg改性的Co/γ-Al_2O_3-TiO_2催化剂,通过X射线衍射(XRD)、紫外可见漫反射光谱(DR-UV-vis)、N_2吸附-脱附(BET)、X射线光电子能谱(XPS)和H_2程序升温还原(H_2-TPR)等技术对催化剂进行表征,并考察了其对丙烷燃烧的催化性能。结果表明,Co在原始γ-Al_2O_3-TiO_2载体和Mg改性MgO/γ-Al_2O_3-TiO_2载体上均以Co_3O_4的形式存在;Mg掺入后与Al_2O_3作用形成MgAl_2O_4尖晶石,改善了载体的织构性质,提升了Co_3O_4在催化剂载体表面的暴露数量和分散程度。此外,MgAl_2O_4与Co_3O_4相互作用提升了Co_3O_4颗粒表面Co~(3+)/Co~(2+)和O_(ads)/O_(latt)的比例,并削弱了Co-O键键能,从而提升了其对丙烷的催化燃烧活性。当Mg负载量为15%(质量分数)时,在Co/MgO(15%)/γ-Al_2O_3-TiO_2催化剂上进行丙烷燃烧,丙烷90%转化率的温度比无Mg掺杂的Co/γ-Al_2O_3-TiO_2催化剂的降低了45℃,并且连续反应40 h其活性保持稳定。     

邻苯二胺合钴氧合反应的研究Ⅰ 水溶液中配合物及其氧合配合物稳定常数的测定

自１９３８年Tsumaki报道犤１犦氧载体以来，这方面的研究已有很大进展犤２犦，只是理论研究居多。氧载体的氧合常数是氧载体研究中的一个重要参数，它的测定是氧载体研究中的一项重要内容，用pH电位法测定氧载体的氧合常数已有研究报道犤２～４犦，作者在研究中发现，邻苯二胺合钴（o－Phdn－Co）配合物在固相和水溶液中与O２反应时表现出很大差异，其反应产物的组成比分别为液相配合物Co∶O２＝２∶１，而固相配合物Co∶O２＝１∶２，为究其成因和进行理论探讨，有必要先测定其氧合常数。由于o－Phdn－Co配合物的配位常数也未见文献…     

Systematic investigation of the hydrothermal syntheses of Pr(III)-PDA (PDA = pyridine-2,6-dicarboxylate anion) metal-organic frameworks

A series of novel two-dimensional (2D) and three-dimensional (3D) praseodymium coordination polymers, namely, {[Pr3(PDA)4(HPDA)(H2O)8] x 8H2O}n (2), {[Pr2(PDA)3(H2O)3] x H2O}n (3), {[Pr(PDA)(H2O)4] x ClO4}n (4), and { [Pr2(PDA)2(H2O)5SO4] x 2H2O}n (5) (PDA = pyridine-2,6-dicarboxylic anion), was designed and synthesized under hydrothermal conditions. Complexes 1-3 (chainlike polymer, {[Pr(PDA)(HPDA)(H2O)2] x 4H2O}n (1) was also obtained independently by us, although it has been reported recently by Ghosh et al.) were fabricated successfully by simply tuning the Pr/PDA ratio and exhibited various and intriguing topological structures from a 1D chain to a 3D network. While the synthetic strategy of 5 was triggered and further performed only after 1 was structurally characterized. The complexes were characterized by X-ray single-crystal determination, spectroscopic, and variable-temperature magnetic susceptibility analyses. In complex 2 an unusual nanosized square motif as a building block constructed by eight Pr ions was further assembled into a highly ordered 2D grid compound. In complex 3 the decanuclear Pr metal-based structure as a repeat unit interpenetrated to form a novel 3D polymer. Complex 4 was a 3D network polymer fabricated through a hexanuclear Pr ring as a building block, and ClO4- anions as guests were trapped in the cavity. In complex 5 six Pr atoms, two SO4(2-) anions, and carboxylic oxygen bridges constructed an intriguing rectangle structure as a repeat unit in the grid to form a 2D coordination polymer in which the unique bi-bidentate coordination mode of SO4(2-) anion was observed.