Kinetics and mechanism of ligand interchange in the [RuIII(edta)L] complexes; L=Cysteine and related thiolates

Complexes of the [RuIII(edta)SR]n series, with SR–= deprotonated cysteine, N- acetylcysteine, 2–mercaptoethanol, glutathione and penicilamine, were prepared from [Ru(edta)H2O]– and the corresponding RSH thiols, at pH=5.5. The complexes exhibit intense visible absorption bands at ca. 520nm (3500M–1 cm–1), associated with LMCT from the sulfur ligands bound to RuIII. The kinetics of the formation reactions were first order in [RuIII(edta)H2O]– and thiol reactants, with k1 values ca. 1–5×102 M–1s–1 (25°C) for all the sulfur ligands except penicilamine, which reacted slower by a factor of 10. Activation parameters suggest an associative mechanism, as for the coordination of other S- and N-bound ligands to [RuIII(edta)H2O]–. A reactivity decrease is apparent at low and high pH's (ranges 1–3 and 8–10, respectively), associated with acid-base equilibria involving the less reactive [RuIII(Hedta)H2O] and [RuIII(edta)OH]2– species. A significant rate increase was found for cysteine and penicilamine at ca. pH=8.0, because the thiol reactants deprotonate. The equilibrium constants for all the ligands showed that robust complexes were formed, with K=ca. 1×105 M–1 (25°C). The dissociation rate constants, k–1, were in the 10–3–10–4 s–1 range. The influence of nucleophilic and steric effects increasing and decreasing the formation rates, respectively, is discussed for the thiolate ligands, with adequate comparisons with other L species bound to [RuIII(edta)H2O]–.     

Metal complexes with a new N(4)O(3) amine pendant-armed macrocyclic ligand: synthesis, characterization, crystal structures, and fluorescence studies

The synthesis of a new oxaaza macrocyclic ligand, L, derived from O(1),O(7)-bis(2-formylphenyl)-1,4,7-trioxaheptane and tren containing an amine terminal pendant arm, and its metal complexation with alkaline earth (M = Ca(2+), Sr(2+), Ba(2+)), transition (M = Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+)), post-transition (M = Pb(2+)), and Y(3+) and lanthanide (M = La(3+), Er(3+)) metal ions are reported. Crystal structures of [H(2)L](ClO(4))(2).3H(2)O, [PbL](ClO(4))(2), and [ZnLCl](ClO(4)).H(2)O are also reported. In the [PbL] complex, the metal ion is located inside the macrocyclic cavity coordinated by all N(4)O(3) donor atoms while, in the [ZnLCl] complex, the metal ion is encapsulated only by the nitrogen atoms present in the ligand. pi-pi interactions in the [H(2)L](ClO(4))(2).3H(2)O and [PbL](ClO(4))(2) structures are observed. Protonation and Zn(2+), Cd(2+), and Cu(2+) complexation were studied by means of potentiometric, UV-vis, and fluorescent emission measurements. The 10-fold fluorescence emission increase observed in the pH range 7-9 in the presence of Zn(2+) leads to L as a good sensor for this biological metal in water solution.     

Thermolytic carbonates for potential 5'-hydroxyl protection of deoxyribonucleosides

Thermolytic groups structurally related to well-studied heat-sensitive phosphate/thiophosphate protecting groups have been evaluated for 5'-hydroxyl protection of deoxyribonucleosides as carbonates and for potential use in solid-phase oligonucleotide synthesis. The spatial arrangement of selected functional groups forming an asymmetric nucleosidic 5'-O-carbonic acid ester has been designed to enable heat-induced cyclodecarbonation reactions, which would result in the release of carbon dioxide and the generation of a nucleosidic 5'-hydroxyl group. The nucleosidic 5'-O-carbonates 3-8, 10-15, and 19-21 were prepared and were isolated in yields ranging from 45 to 83%. Thermolytic deprotection of these carbonates is preferably performed in aqueous organic solvent at 90 degrees C under near neutral conditions. The rates of carbonate deprotection are dependent on the nucleophilicity of the functional group involved in the postulated cyclodecarbonation reaction and on solvent polarity. Deprotection kinetics increase according to the following order: 4 < 5 < 10 < 6 < 12 < 7 < 13 < 8 < 14 congruent with 19-21 and CCl4 < dioxane < MeCN < t-BuOH < MeCN:phosphate buffer (3:1 v/v, pH 7.0) < EtOH:phosphate buffer (1:1 v/v, pH 7.0). Complete thermolytic deprotection of carbonates 7, 8, 13, and 14 is achieved within 20 min to 2 h under optimal conditions in phosphate buffer-MeCN. The 2-(2-pyridyl)amino-1-phenylethyl and 2-[N-methyl-N-(2-pyridyl)]aminoethyl groups are particularly promising for 5'-hydroxyl protection of deoxyribonucleosides as thermolytic carbonates.     

Ferromagnetism and chirality in two-dimensional cyanide-bridged bimetallic compounds

The combination of hexacyanoferrate(III) anions, [Fe(CN)(6)](3)(-), with nickel(II) complexes derived from the chiral ligand trans-cyclohexane-1,2-diamine (trans-chxn) affords the enantiopure layered compounds [Ni(trans-(1S,2S)-chxn)(2)](3)[Fe(CN)(6)](2).2H(2)O (1) and [Ni(trans-(1R,2R)-chxn)(2)](3)[Fe(CN)(6)](2).2H(2)O (2). These chiral systems behave as ferromagnets (T(c) = 13.8 K) with a relatively high coercive field (H(c) = 0.17 T) at 2 K. They also exhibit an unusual magnetic behavior at low temperatures that has been attributed to the dynamics of the magnetic domains in the ordered phase.     

Fourier Transform Infrared Spectroscopy and Solid Phase Extraction Applied to the Determination of Oil and Grease in Water Matrices

 The solid phase extraction as a solvent-free method for the analysis of oil and grease in waters was studied. The use of a PTFE surface as a solid phase allows the retention of the volatile fraction of oil and grease, and further analysis of carbon–hydrogen bonds using infrared spectroscopy can be done on the surface. Various oils and grease samples were tested: n-hexadecane, n-tetradecane, n-nonadecane, n-docosane, isooctane, diesel oil and gasoline. Temperatures from 25° to 90 °C and a range of heating times were checked for extraction. Precision tests showed relative standard deviation values of around 10% in several samples of the same concentration. Calibration lines of n-hexadecane showed high correlation coefficients from 0.9 to 30 mg/l. Recoveries for the various oils using different calibration lines showed values from 90 to 110%. The method described here is fast and clean, and allows reproducible measurements of oil and grease in water that do not require the use of a solvent. Received March 1, 2001; accepted August 15, 2001; published online July 15, 2002     

Poly(2-hydroxyethyl acrylate) hydrogel confined in a hydrophobous porous matrix

A series of interpenetrated polymer networks (IPNs) in which the first component is a porous poly(ethyl methacrylate) (PEMA) hydrophobic network and the second one is a poly(2-hydroxyethyl acrylate) (PHEA) hydrophilic network were synthesized. Equilibrium sorption isotherms can be reduced to a single master curve for all the IPNs when the water absorbed is expressed per gram of PHEA in them. The equilibrium water sorption in immersion is always much smaller than that of pure PHEA. This feature is due to the confining effect of the stiff PEMA matrix. The plasticizing effect of the absorbed water on the PHEA phase was characterized using thermally stimulated depolarization currents, dynamic-mechanical analysis and dielectric relaxation spectroscopy. The results show that the shift of the main relaxation peak towards lower temperatures is unaffected by the presence of the PEMA matrix, and only depends on the water content per gram of PHEA in the IPN.     

Difference in spin crossover pathways among saddle-shaped six-coordinated iron(III) porphyrin complexes

The electronic states of a series of saddle-shaped porphyrin complexes [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) have been examined in solution by (1)H NMR, (13)C NMR, and EPR spectroscopy and by magnetic measurements. While [Fe(OMTPP)(DMAP)(2)](+) and [Fe(TBTXP)(DMAP)(2)](+) maintain the low-spin (S = (1)/(2)) state, [Fe(OMTPP)(THF)(2)](+) and [Fe(TBTXP)(THF)(2)](+) exhibit an essentially pure intermediate-spin (S = (3)/(2)) state over a wide range of temperatures. In contrast, the Py and 4-CNPy complexes of OMTPP and TBTXP exhibit a spin transition from S = (3)/(2) to S = (1)/(2) as the temperature was decreased from 300 to 200 K. Thus, the magnetic behavior of these complexes is similar to that of [Fe(OETPP)Py(2)](+) reported in our previous paper (Ikeue, T.; Ohgo, Y.; Yamaguchi, T.; Takahashi, M.; Takeda, M.; Nakamura, M. Angew. Chem., Int. Ed. 2001, 40, 2617-2620) in the context that all these complexes exhibit a novel spin crossover phenomenon in solution. Close examination of the NMR and EPR data of [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) (L = Py, 4-CNPy) revealed, however, that these complexes adopt the less common (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature in contrast to [Fe(OETPP)Py(2)](+) which shows the common (d(xy))(2)(d(xz), d(yz))(3) electron configuration. These observations have been attributed to the flexible nature of the OMTPP and TBTXP cores as compared with that of OETPP; the relatively flexible OMTPP and TBTXP cores can ruffle the porphyrin ring and adopt the (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature. Therefore, this study reveals that the rigidity of porphyrin cores is an important factor in determining the spin crossover pathways.     

Continuous solid-phase extraction and preconcentration of bisphenol A in aqueous samples using molecularly imprinted columns

A bisphenol A (BPA) molecularly imprinted polymer, the composition of which was optimised using a chemometric approach, has been applied to the selective preconcentration of the template from aqueous samples. The selectivity of the polymer toward BPA and related compounds was evaluated chromatographically. The BPA-imprinted polymer was packed in a column and used for continuous on-column solid-phase extraction (MISPE) of aqueous samples followed by subsequent analysis by HPLC with fluorescence detection of the eluted fractions. The composition of the washing solvent applied in the MISPE procedure was optimised to favour the specific interactions of the MIP with BPA and to remove the non-selectively bound matrix components. The MISPE method has proven to be effective for selective preconcentration of BPA in aqueous samples (recoveries >84% obtained in the eluate for 10–100 mL sample volumes) enabling detection and quantification limits of 1.0 and 3.3 ng mL^–1, respectively (based on 25 mL sample size). Analytical recoveries were between 92 and 101% for river water samples spiked with known amounts of BPA (30, 60, and 80 ng mL^–1); relative standard deviations (RSD) were lower than 5.0%.     

Modelling the soundscape quality of urban waterfronts by artificial neural networks

The renewal of the urban waterfronts has become a major focus of attention for politicians and decision makers in the city’s management programs. The recognition of the patterns that define the waterfronts’ identity is essential to select new strategies of intervention for the environmental recovery. In order to create adequate environments for everyday life within a sustainable development, new links between human senses, human perception and design need to be created. Within this wide approach, the landscape and the soundscape play a significant role and can become a key driving force in the implementation of the changes. New techniques have to be tested to identify the sonic and visual parameters capable to explain the specificity of a waterfront. With this purpose, an artificial neural network (ANN) was developed, and the relative importance of the input variables was evaluated. The collected database was also analysed by multiple linear regression (MLR) to compare the outcomes of both models. The urban waterfront of Naples (Italy) was chosen as case study. The results obtained show that the performance of the neural network is better than the one of the linear regression (rANN = 0.949, rMLR = 0.639). The interpretation of the relative importance method is also quite satisfactory in the ANN.     

Influence of the metal loading on the electrocatalytic activity of carbon-supported (100) Pt nanoparticles

Journal of Solid State Electrochemistry - The influence of the metal loading (i.e. interparticle distance) of shape-controlled Pt nanoparticles on their electrocatalytic properties is evaluated for...