三氧化钨/氧化银复合材料的水热法合成及其光催化降解性能研究

染料污染是水污染中最严重的问题之一,吸引了很多科学家的关注.人们尝试了很多方法去解决该问题,如化学氧化法、物理吸附法、光催化降解法和生物降解法等.与其他几种方法相比,光催化法有着低能耗、环保以及高效等优势.三氧化钨是常见的半导体材料,具有独特的光学性能,近年来受到了广泛的研究.本文以钨酸钠和硫脲为前驱体,通过水热法制备了三氧化钨/氧化银(WO_3/Ag_2O)复合材料,并用光催化降解亚甲基蓝来分析其光催化性能.通过X射线光电子能谱、X射线衍射、透射电子显微镜、扫描电子显微镜、紫外可见吸收光谱等表征手段对样品的形貌、晶格结构和光催化的性能进行表征.氧化银的带宽为1.2 e V,对可见光很敏感,三氧化钨和氧化银的复合使材料在可见光下的光催化活性显著增强,在可见光下对亚甲基蓝染料的光降解率可以达到98%.实验结果表明,复合材料中的三氧化钨纳米棒为六方相,其平均直径约为200 nm,平均长度约为4μm.而复合材料中的氧化银纳米颗粒为六方相,附着在氧化钨纳米棒的表面,平均晶粒尺寸为20 nm.氧化银的存在为复合材料提供了更多的反应活性位点.相较于单一组分,复合材料在可见光下的光吸收度更高,这说明三氧化钨和氧化银的复合改变了材料的能带结构.研究发现,三氧化钨和氧化银之间形成的异质结构是其优良光催化性能的来源.此外,三氧化钨和氧化银复合材料还具有良好的催化稳定性和化学稳定性.本文结果表明,可以通过给宽带隙的半导体材料复合一些带隙合适的金属氧化物以提升其光催化活性.     

Hydrothermal synthesis of graphene oxide/multiwalled carbon nanotube/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> ternary nanocomposite for removal of Cu (II) and methylene blue

In this work, highly activated graphene oxide/multiwalled carbon nanotube/Fe₃O₄ ternary nanocomposite adsorbent was prepared from a simple hydrothermal route by using ferrous sulfate as precursor. For this purpose, the graphene oxide/multiwalled carbon nanotube architectures were formed through the π-π attractions between them, followed by attaching Fe₃O₄ nanoparticles onto their surface. The structure and composition of as-prepared ternary nanocomposite were characterized by XRD, FTIR, XPS, SEM, TEM, Raman, TGA, and BET. It was found that the resultant porous graphene oxide/multiwalled carbon nanotube/Fe₃O₄ ternary nanocomposite with large surface area could effectively prevent the π-π stacking interactions between graphene oxide nanosheets and greatly improve sorption sites on the surfaces. Thus, owing to the unique ternary nanocomposite architecture and synergistic effect among various components, as-prepared ternary nanocomposite exhibited high separation efficiency when they were used to remove the Cu (II) and methylene blue from aqueous solutions. Furthermore, the adsorption isotherms of ternary nanocomposite structures for Cu (II) and methylene blue removal fitted the Langmuir isotherm model. This work demonstrated that the graphene oxide/multiwalled carbon nanotube/Fe₃O₄ ternary nanocomposite was promising as an efficient adsorbent for heavy metal ions and organic dye removal from wastewater in low concentration.     

Heat transfer enhancement in MOSFET mounted on different FR4 substrates by thermal transient measurement

Miniaturization of electronic package leads to high heat density and heat accumulation in electronics device, resulting in short life time and premature failure of the device. Junction temperature and thermal resistance are the critical parameters that determine the thermal management and reliability in electronics cooling. Metal oxide field effect transistor (MOSFET) is an important semiconductor device for light emitting diode-integrated circuit (LED IC) driver application, and thermal management in MOSFET is a major challenge. In this study, investigations on thermal performance of MOSFET are performed for evaluating the junction temperature and thermal resistance. Suitable modifications in FR4 substrates are proposed by introducing thermal vias and copper layer coating to improve the thermal performance of MOSFET. Experiments are conducted using thermal transient tester (T3ster) at 2.0 A input current and ambient temperature varying from 25 ℃to 75 °C. The thermal parameters are measured for three proposed designs: FR4 with circular thermal vias, FR4 with single strip of copper layer and embedded vias, and FR4 with I-shaped copper layer, and compared with that of plain FR4 substrate. From the experimental results, FR4_I-shaped shows promising results by 33.71% reduction in junction temperature and 54.19% reduction in thermal resistance. For elevated temperature, the relative increases in junction temperature and thermal resistance are lower for FR4_I-shaped than those for other substrates considered. The introduction of thermal vias and copper layer plays a significant role in thermal performance.     

自适应非凸稀疏正则化下自适应光学系统加性噪声的去除

自适应光学系统可以实时测量并校正波前信息,但是系统中大量的噪声严重影响了系统的探测精度.自适应光学系统中一般为加性噪声,本文提出一种全新的变分处理模型去除加性噪声,该模型采用自适应非凸正则项.非凸正则项在保持图像细节上较凸正则项具有更好的效果,能更好地保持点源目标的完整性.另外,根据不同区域的噪声水平自适应地构建正则化参数,使不同区域的像素点受到不同程度的噪声抑制,可以更好地保持目标的边缘细节.在算法实现上,为了解决非凸正则项收敛性较差的缺陷,采用分裂Bregman算法及增广拉格朗日对偶算法进行计算.实验及数值仿真结果都表明,该方法能够较好地去除系统中的加性噪声,且光斑信号保存得较为完整,处理后的质心探测精度及信噪比较高.     

连续变量1.34 μm量子纠缠态光场的实验制备

设计研制了连续单频671 nm/1342 nm双波长激光器,并通过模式清洁器降低了激光器额外噪声.利用该低噪声连续单频激光器抽运由Ⅱ类准相位匹配晶体构成的双共振非简并光学参量放大器,实验制备出纠缠度达3 dB的光通信波段1.34μm连续变量量子纠缠态光场.该波段量子纠缠态光场在光纤中传输损耗低且相散效应小,与现有的光纤通信系统相兼容,可用于实现基于光纤的实用化连续变量量子通信.     

混有协同自适应巡航控制车辆的异质交通流稳定性解析与基本图模型

针对传统车辆和协同自适应巡航控制(cooperative adaptive cruise control,CACC)车辆构成的异质交通流,研究其稳定性与基本图模型.应用实车测试验证的CACC模型和智能驾驶员模型(intelligent driver model)分别作为CACC车辆和传统车辆的跟驰模型,建立异质流稳定性解析框架,研究不同平衡态速度、不同CACC车辆比例时的异质流稳定性.推导异质流基本图模型,并进行数值仿真实验.研究结果表明,在传统车辆稳定的速度范围,异质流处于稳定状态.在传统车辆不稳定的速度范围,CACC车辆比例增加以及平衡态速度远离9.6—18.6 m/s速度范围,均能够改善异质流的不稳定性.通行能力随着CACC车辆比例的增加而提高.此外,CACC模型的期望车间时距越大,异质流稳定域越大,但通行能力降低.因此,恒定车间时距CACC控制策略下的期望车间时距取值应权衡异质流稳定域和通行能力两个方面的影响.     

A numerical approach for pressure transient analysis of a vertical well with complex fractures

A new well test model for a vertical fractured well is developed based on a discrete-fracture model in which the fractures are discretized as one dimensional (1-D) entities. The model overcomes the weakness of complex meshing, a large number of grids, and instability in conventional stripe-fracture models. Then, the discrete-fracture model is implemented using a hybrid element finite-element method. Triangular elements are used for matrix and line elements for the fractures. The finite element formulation is validated by comparing with the semi-analytical solution of a single ver-tical fractured well. The accuracy of the approach is shown through several examples with different fracture apertures, fracture conductivity, and fracture amount. Results from the discrete-fracture model agree reasonably well with the stripe-fracture model and the analytic solutions. The advantages of the discrete-fracture model are presented in mesh gen-eration, computational improvement, and abilities to handle complex fractures like wedge-shaped fractures and fractures with branches. Analytical results show that the number of grids in the discrete-fracture model is 10%less than stripe-fracture model, and computational efficiency increases by about 50%. The more fractures there are, the more the com-putational efficiency increases.     

页岩气储层压裂数值模拟技术研究进展

页岩气储层水力压裂数值模拟既要考虑页岩储层岩石的特性,又要兼顾水平外分段压裂施工工艺,是一个非常棘手的力学难题.本文简述了页岩气储层岩石具有的地质力学特征和页岩气储层开发常用的水平井分段压裂技术;详述了扩展有限元、边界元、离散元在水力压裂裂缝模拟上的应用现状,指出了它们在处理裂缝问题的局限性和优越性,总结出边界元三维位移不连续法是模拟多裂缝扩展的有效方法.     

Large scale silver nanowires network fabricated by MeV hydrogen(H~+) ion beam irradiation

A random two-dimensional large scale nano-network of silver nanowires(Ag-NWs) is fabricated by MeV hydrogen(H~+) ion beam irradiation. Ag-NWs are irradiated under H~+ion beam at different ion fluences at room temperature. The Ag-NW network is fabricated by H~+ion beam-induced welding of Ag-NWs at intersecting positions. H~+ion beam induced welding is confirmed by transmission electron microscopy(TEM) and scanning electron microscopy(SEM). Moreover, the structure of Ag NWs remains stable under H~+ion beam, and networks are optically transparent. Morphology also remains stable under H~+ion beam irradiation. No slicings or cuttings of Ag-NWs are observed under MeV H~+ion beam irradiation.The results exhibit that the formation of Ag-NW network proceeds through three steps: ion beam induced thermal spikes lead to the local heating of Ag-NWs, the formation of simple junctions on small scale, and the formation of a large scale network. This observation is useful for using Ag-NWs based devices in upper space where protons are abandoned in an energy range from MeV to GeV. This high-quality Ag-NW network can also be used as a transparent electrode for optoelectronics devices.     

Construction and cosmic-ray test of the new inner drift chamber for BESIII

A new inner drift chamber has been built which can replace the aged part of the BESIII drift chamber when needed. The design of the new inner drift chamber can minimize the ineffective area in the very forward and backward region and hence reduce the background event rate. With this design, the new inner drift chamber is expected to have a longer lifetime and improved performance due to the lower occupancy. The endplates and the cylinder were machined with high precision. Wire stringing was performed after the mechanical structure was assembled, and good quality of wire stringing was ensured by measurement of the tension and leakage current of the wires. After completion of the physical construction of the new chamber, a cosmic-ray test was carried out to test its performance. The results of the cosmic-ray test show that the new inner chamber achieves a spatial resolution of127 μm and a d E/dx resolution of 6.4%, which satisfies the design specifications.