Determination of polycyclic aromatic hydrocarbons (PAHs) from organic aerosols using hollow fiber micro-porous membrane liquid-liquid extraction (HF-MMLLE) followed by gas chromatography-mass spectrometry analysis

A method for determination of polycyclic aromatic hydrocarbons (PAHs) from aerosols was developed. Instead of conventionally used non-polar or slightly polar phenylmethylpolysiloxane column a highly polar, highly substituted, cyanopropyl column (VF-23 MS) was used for separation of PAHs. Based on hollow fiber micro-porous membrane liquid-liquid extraction (HF-MMLLE) a method was developed for sample clean up and pretreatment. An enrichment factor of 617-1022 was obtained with extraction efficiency 10.2-18.9% for different PAHs analyzed in this study. The optimized method was successfully applied to aerosol samples and limits of detection between 1.2 pg m⁻³ and 180 pg m⁻³ was obtained. Almost all PAHs were found in most of the aerosol samples.     

Magnetic properties of magnetite thin films close to the Verwey transition

Temperature dependence of the magnetic properties of magnetite thin film across the Verwey transition has been investigated. As the temperature is decreased, the magnetization of the film in a fixed field showed a sharp decrease close to the Verwey transition temperature (T_v). The M–H loops of the film have been recorded at various temperatures below and above T_v. It is found that film does not saturate at any temperature and saturation becomes more difficult below T_v. While cooling through T_v, the extrapolated value of magnetization to infinite field (Q), calculated from the numerical fit 4πM=Q [1−(H*/H)^1/2], does not show a drop, but the coefficient indicating difficulty in saturation (H*) shows a sharp rise as does the coercivity.     

Immunoassay utilizing imaging surface plasmon resonance for the detection of cyclopiazonic acid (CPA) in maize and cheese

α-Cyclopiazonic acid (CPA) is a tremorgenic mycotoxin produced by Aspergillus and Penicillium fungal species, commonly found on agricultural commodities or fermented food products. A sensitive and rapid imaging surface plasmon resonance (iSPR) assay was developed to detect CPA in maize and cheese by combining an indirect competitive immunoassay and signal amplification based upon a secondary antibody (Ab₂) conjugated with gold nanoparticles. Matrix-matched calibration curves were used to determine CPA content in maize and cheese samples. Recoveries, at two spiking levels in maize and cheese, were 89 to 126%, with standard deviations of repeatability (RSDr) of less than 16%. The limits of detection were 17 and 6 μg/kg in maize and cheese, respectively. To separate the CPA-contaminated samples from uncontaminated samples, a cutoff validation level of 40 μg/kg was introduced. The assay was applied to samples of naturally contaminated maize and was compared with competitive inhibition enzyme-linked immunosorbent assay (CI-ELISA). This is the first report to detect CPA using an immuno-biosensor iSPR format.

     

Kinetic Instability of Anisotropic Drift Wave Accompanied by Field Aligned Currents in Solar Coronal Loop

Solar coronal loops are frequently accompanied by the field-aligned currents, which drive instabilities if the drift velocity u₀> v_A the Alfvén velocity. For our choice of parameters, the critical threshold value of u₀/v_A is~3.0 for growth and the corresponding current filling factor~10^-3-10^-4. Below this value we are no longer in the kinetic regime. The coronal loops also have short-scale density gradients within each loop. The electron resonance in the presence of density gradient causes the drift mode to grow. We study the effect of these two free energy sources, the electron drift and the density gradient, in the presence of temperature anisotropy T_⊥α > T_||α. These effects simultaneously exist in the coronae. Using gyrokinetic theory, we investigate the influence of these effects, examine how they interplay with each other and study the consequent growth of the magnetosonic wave. We observe that kinetic instability driven by density gradient can be suppressed by field-aligned currents. The temperature anisotropy with chosen signatures causes further stabilizing effect. The results may prove useful to study the heating mechanism of solar coronal loops, acceleration of particles and confinement of particles in the thermonuclear reactors.     

The influence of substrate temperature and annealing on the properties of pulsed laser-deposited YIG films on fused quartz substrate

Yttrium iron garnet (YIG) thin films were deposited on fused quartz substrate at different substrate temperatures (T_s) varying from room temperature (RT) to 850 °C using pulsed laser deposition (PLD) technique. All the films in the as-deposited state were X-ray amorphous and non-magnetic at RT. The film deposited at RT after annealing at temperatures T_a?700 °C showed both X-ray peaks and the magnetic order. The films deposited at higher T_s (500–850 °C) and then annealed at 700 °C resulted in better-quality films with higher 4πM_s value. The highest value of magnetization was for the sample deposited at 850 °C and annealed at 700 °C, which is 68% of the bulk 4πM_s value.     

Hydrodynamic analysis of electrostatic counter-streaming instability in a spin-polarized electron–positron–ion plasma

In this study, we present linear analysis of electrostatic counter-streaming instability in spin-polarized electron–positron–ion (e-p-i) plasma. With the aid of the separate spin evolution-quantum hydrodynamic (SSE-QHD) model, we derive the dispersion relation of counter-streaming instability. We numerically solve the dispersion and find four wave solutions: Langmuir wave, positron acoustic mode, and two electron and positron spin-dependent waves. It is noted that coupling of streaming and spin effects excites Langmuir instability and positron acoustic mode instability. However, in the absence of spin effect, only Langmuir instability will survive in e-p-i plasma. We have also discussed the effects of positron concentration, streaming speed, and spin polarization on the real frequency of waves and the growth rate. The present study may be helpful for understanding longitudinal wave propagation and instabilities in dense magnetized environments.     

Exploring the Potential of Natural Product-Based Nanomedicine for Maintaining Oral Health

Oral diseases pose a major threat to public health across the globe. Diseases such as dental caries, periodontitis, gingivitis, halitosis, and oral cancer affect people of all age groups. Moreover, unhealthy diet practices and the presence of comorbidities aggravate the problem even further. Traditional practices such as the use of miswak for oral hygiene and cloves for toothache have been used for a long time. The present review exhaustively explains the potential of natural products obtained from different sources for the prevention and treatment of dental diseases. Additionally, natural medicine has shown activity in preventing bacterial biofilm resistance and can be one of the major forerunners in the treatment of oral infections. However, in spite of the enormous potential, it is a less explored area due to many setbacks, such as unfavorable physicochemical and pharmacokinetic properties. Nanotechnology has led to many advances in the dental industry, with various applications ranging from maintenance to restoration. However, can nanotechnology help in enhancing the safety and efficacy of natural products? The present review discusses these issues in detail.     

Ultrasound phase rotation beamforming on multi-core DSP

Phase rotation beamforming (PRBF) is a commonly-used digital receive beamforming technique. However, due to its high computational requirement, it has traditionally been supported by hardwired architectures, e.g., application-specific integrated circuits (ASICs) or more recently field-programmable gate arrays (FPGAs). In this study, we investigated the feasibility of supporting software-based PRBF on a multi-core DSP. To alleviate the high computing requirement, the analog front-end (AFE) chips integrating quadrature demodulation in addition to analog-to-digital conversion were defined and used. With these new AFE chips, only delay alignment and phase rotation need to be performed by DSP, substantially reducing the computational load. We implemented the delay alignment and phase rotation modules on a Texas Instruments C6678 DSP with 8 cores. We found it takes 200 μs to beamform 2048 samples from 64 channels using 2 cores. With 4 cores, 20 million samples can be beamformed in one second. Therefore, ADC frequencies up to 40 MHz with 2:1 decimation in AFE chips or up to 20 MHz with no decimation can be supported as long as the ADC-to-DSP I/O requirement can be met. The remaining 4 cores can work on back-end processing tasks and applications, e.g., color Doppler or ultrasound elastography. One DSP being able to handle both beamforming and back-end processing could lead to low-power and low-cost ultrasound machines, benefiting ultrasound imaging in general, particularly portable ultrasound machines.     

Purely site-specific chemisorption and conformation of trimethylamine on Si(100)c(4 x 2)

One of the fundamental points of interest on the Si(100) surface is how the spatial localization of electron density on the buckled silicon dimer controls the site-specific reaction toward different Lewis acid and Lewis base molecules. We have investigated the adsorption of trimethylamine (TMA) on Si(100)c(4x2) using scanning tunneling microscopy (STM) at 80 K. The adsorbed TMA appears as a triangle-shaped bright protrusion in the occupied-state STM image. The triangle-shaped protrusion is ascribed to three methyl groups in the adsorbed TMA. The center of the protrusion is located on the down atom site, which indicates that the adsorption of TMA occurs only on the down dimer atom. Thus, TMA adsorption on Si(100)c(4x2) is found to be purely site-specific on the down dimer atom and can be categorized in Lewis acid-base reaction.