High-performance liquid chromatographic determination of cocaine and benzoylecgonine by direct injection of human blood plasma sample into an alkyl-diol-silica (ADS) precolumn

A column-switching high-performance liquid chromatographic method with UV detection for the determination of cocaine (COC) and benzoylecgonine (BZE) in human blood plasma samples is described. The method uses an alkyl-diol-silica ADS-C18 extraction precolumn. A 50- micro L plasma sample was introduced to the ADS precolumn in order to separate the analytes from proteins and endogenous compounds. The fraction containing COC and BZE was back-flushed and transferred to an Alltech mixed-mode C(18)/cation-exchange analytical column for final separation. The validation of the method revealed quantitative recoveries from 95.0 to 99.0% for COC at three different concentrations (0.5, 1.0 and 2.0 micro g mL(-1)), and from 96.0 to 99.0% for BZE at the same concentration levels with coefficients of variation <4.00% (n=5). The detection limit (signal to noise ratio (S/N)>3) was 0.03 micro g mL(-1) for all the compounds with an injection volume of 50 micro L. However, it was possible to enhance the sensitivity further by injecting larger plasma volumes, up to 200 micro L, at the same optimal conditions. The overlap of sample preparation, analysis and reconditioning of the extraction column, increase the overall sample throughput to 5 samples h(-1). The developed method has been applied to human blood plasma samples from subjects suspected of cocaine abuse.     

Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde: Calibration of a thermal desorption-gas chromatography-flame ionization detection

The paper presents a new method for the generation of acetaldehyde in the amounts that allow to calibrate the measuring system. The method is based on thermal decomposition of surface compounds at the range 130-190 °C, in which an acetaldehyde as the decomposition product is released. The synthetic pathway leading to the desired surface compounds is described. Investigations demonstrated that the synthesis of the compounds on the surface of the support material (silica gel) was carried out homogeneously. The technique proposed was used for the generation of gaseous standard mixtures containing acetaldehyde for the calibration of a thermal desorber-gas chromatograph-flame ionization detector system.     

Racemic ofloxacin separation by supported-liquid membrane extraction with two organic phases

As the relation of chirality and activities of drugs is researched deeply, people become to re-alize the clinic importance of chirality. The different enantiomers of a drug can have vastly differ-ent pharmacological activities, pharmacokinetic processes and toxicity[1,2]. The most well-docu- mented example is that of the drug substance thalidomide. Bitter lessons and scientific research promote the interest in single-enantiomer drugs, so the potential of the chiral drug market is enormous[3]. …     

Evaluation of the efficiency of extraction of PAHs from diesel particulate matter with pressurized solvents

Pressurized Fluid Extraction (PFE) was evaluated for the extraction of polycyclic aromatic hydrocarbons (PAHs) and nitro-derivatives from diesel particulate matter. Extraction conditions were set up by performing several tests in which temperature, solvent strength, pressure, and static time were gradually increased. The results obtained on a laboratory test material made of a "lean" (low content of soluble fraction) Diesel particulate matter indicate that very severe conditions were needed in order to obtain better recoveries of the higher molecular weight molecules. Moreover, extraction efficiency seems to be influenced by the amount of soluble matter in the particulate, so that a "lean" particulate appears more difficult to extract. Recoveries of the deuterated standards of certain PAHs (i.e. indeno[1,2,3- cd]pyrene) were incomplete even with the toughest conditions tested. Experiments carried out on a certified material (SRM 1650 from NIST) also indicate that PFE can perform a better extraction of some of the PAHs than the method used for certification, but still incomplete. Comparison of results obtained on the SRM with different extraction techniques suggests that the composition of the extract varies considerably with the extraction technique and conditions. It is relevant to notice that recent Diesel engines produce leaner particulate: for future materials more drastic extraction conditions will be required.     

Polarographic and voltammetric determination of trace amounts of 2-nitronaphthalene

The polarographic behaviour of 2-nitronaphthalene was investigated by DC tast polarography (DCTP) and differential pulse polarography (DPP), both at a dropping mercury electrode, and differential pulse voltammetry and adsorptive stripping voltammetry, both at a hanging mercury drop electrode. Optimum conditions have been found for the determination of 2-nitronaphthalene by the given methods in the concentration ranges of 2×10^–6–1×10^–4, 2×10^–7–1×10^–4, 1×10^–8–1×10^–4 and 2×10^–9–1×10^–8 M, respectively. Practical applicability of these techniques was demonstrated by the determination of 2-nitronaphthalene in drinking and river water after its preliminary separation and preconcentration using liquid–liquid and solid-phase extraction with limits of determination of 3×10^–10 M (drinking water) and 3×10^–9 M (river water).     

A Highly Sensitive and Selective Assay for Cysteine Using the Chemiluminescence Reaction of Luminol and Hydrogen Peroxide

A very simple, highly sensitive and selective chemiluminescence (CL) method was established for the determination of cysteine. This method is based on the fact that the CL reaction of luminol and hydrogen peroxide can be greatly enhanced by cysteine. The CL intensities at maximum light emission were linearly correlated with the concentration of cysteine over the range of 2.0×10^–8–6.0×10^–6molL^–1 with a detection limit of 7.5×10^–9molL^–1. The relative standard deviation was 1.7% for the determination of 1.0×10^–7molL^–1 cysteine (n=9). The feasibility of utilizing the proposed method for the determination of total concentration of cysteine in human serum was examined.     

Kinetics and electrochemical studies on superoxide

Rate constants for the reaction of superoxide O^- ₂ with various substrates were obtained through stationary electrode polarography theory and technique. In solvent acetonitrile, the substrate and the rate constants of the reaction O^- ₂ + AH^{- k2}Product, are, AH = isopropanol (k₂ < 0.01 M^-1 s^-1); ethanol (k₂ = 1.42 × 10² M^-1 s^-1); methanol (k₂ = 1.1 × 10⁷ M^-1 s^-1), H₂O (k₂ = 1.0 × 10⁵ M^-1 s^-1). In MeCN, O^-2 was found to be rather unreactive towards glucose and acetone but it reacts with fructose and sucrose catalytically. However, in DMF2, O^- ₂reacts with glucose and fructose with k2 order of 105 M-1 s-1. The mechanism of the reaction of O^- ₂ with the substrates (AH) is proposed as O^- ₃ + AH k₂O, AH^k2 _k-1 k [O₂H + AH]^-, _k-2O₂H + A^- with k₁ = 10⁹ M^-1 s^-1 and k^-1 = 10⁸ -10⁹ s^-1. With these values of k_-1 and k₁, k k₂(obs). The reversible E_1/2 for O₂ + e O^- ₂ in various solvents: MeCN, acetone, isopropanol, methanol, H₂O were obtained either directly from the reversible voltammogram or from experimental voltammograms and the rate constants obtained (as above) using stationary electrode polargraphy theory; E_1/2 being -0.82 (MeCN),-0.85 (acetone),-0.72 (isopropanol);-0.66 (MeOH),-0.56 (H2O) vs SCE.     

Liquid chromatographic isolation of coplanar PCB congeners on an activated carbon stationary phase

A rapid and uncomplicated method for the fractionation of PCBs leading to an isolation of the highly toxic non-ortho substituted PCBs is described. The liquid chromatographic separation was achieved on a stationary phase consisting of activated carbon and Celite 545. Using eluents with different polarity, isolation of the non-ortho substituted PCBs in a single fraction was achieved. The fractions were analysed by GC/MS. The method was tested by the determination of non-ortho substituted PCBs in technical mixtures (Aroclor 1254 and Aroclor 1242). The results were compared with those obtained by using an HPLC fractionation on a porous graphitic carbon column. Finally, the micro-column fractionation was used for the determination of non-ortho substituted PCBs in native soil samples. Received: 5 March 1997 / Revised: 4 June 1997 / Accepted: 6 June 1997     

Formal total synthesis of β-pipitzol

(±)-$\text{O}$-methylperezone ($\text{1b}$) was obtained by selective oxidative demethylation of (±)-leucoperezone trimethyl ether ($\text{4a}$). Compound ($\text{4a}$) was prepared by condensation of 2,3,5-trimethoxytoluene ($\text{5e}$) with 6-methyl-5-hepten-2-one, followed by reductive removal of the tertiary alcohol. The aromatic precursor $\text{5e}$ was prepared in four steps from 2,3-dimethoxytoluene ($\text{5a}$) and, alternatively, in three steps from 5-bromoveratraldehyde ($\text{6a}$). Racemic $\text{1b}$ and $\text{4a}$ were directly compared with the optically active molecules prepared from natural R(-)-perezone ($\text{1a}$).     

Thiacalix[4]arene derivatives with proximally bridged lower rim

New types of lower rim proximally bridged thiacalix[4]arenes have been prepared by direct aminolysis of starting tetraacetate derivative in the cone conformation using aliphatic α,ω-diamines. X-ray crystallography revealed the highly preorganized array of -C(O)NH- bonds resulting in strong intramolecular hydrogen bonding between amide groups of both bridges. The length of the corresponding diamine was found to have an essential influence on the yield of these bridged molecules.