Optimization of Microwave-Assisted Extraction for the Determination of Glycyrrhizin in Menthazin Herbal Drug by Experimental Design Methodology

In the present study, a microwave-assisted extraction (MAE) method has been investigated for the extraction of glycyrrhizin from Menthazin herbal drug. The extracted samples have been analyzed by a developed reversed-phase liquid chromatography with ultraviolet detection. The separation was performed by a Eurospher-100 C₈ reversed-phase column (250 × 4.6 mm i.d., 5 μm) and the mobile phase consisted of methanol:acetonitrile:water:glacial acetic acid (30:30:40:1 v/v/v/v) with a flow rate of 0.8 mL min^?1. The extraction procedure has been screened by a two level full factorial design for determination of statistically significant parameters. Thereafter, the identified parameters, extraction temperature, time and solvent volume were optimized by a Box–Behnken design. The proposed mathematical model was based on analysis of variance results and correctly explained the behavior of the response in the experimental domain. R ² value adjusted for numbers of degrees of freedom was 0.9915 and P-value for lack of fit, 0.8499 at the 95% confidence level, P > 0.05. The optimal condition identified were extraction temperature, 70 °C, time, 13.8 min and solvent volume 2.0 mL. To evaluate the applicability of the proposed MAE method, results were compared with those obtained with the liquid extraction method. Extraction efficiency and precision were higher when MAE has been used. The proposed method allows extracting the glycyrrhizin in a small quantity of solvent and faster than the liquid extraction method.     

Second-order calibration of excitation-emission matrix fluorescence spectra for determination of glutathione in human plasma

A rapid non-separative spectroflourimetric method based on the second-order calibration of the excitation-emission data matrix was proposed for the determination of glutathione (GSH) in human plasma. In the phosphate buffer solution of pH 8.0 GSH reacts with ortho-phthaldehyde (OPA) to yield a fluorescent adduct with maximum fluorescence intensity at about 420 nm. To handle the interfering effects of the OPA adducts with aminothiols other than GSH in plasma as well as intrinsic fluorescence of human plasma, parallel factor (PARAFAC) analysis as an efficient three-way calibration method was employed. In addition, to model the indirect interfering effect of the plasma matrix, PARAFAC was coupled with standard addition method. The two-component PARAFAC modeling of the excitation-emission matrix fluorescence spectra accurately resolved the excitation and emission spectra of GSH, plasma (or plasma constituents). The concentration-related PARAFAC score of GSH represented a linear correlation with the concentration of added GSH, similar to that is obtained in simple standard addition method. Using this standard addition curve, the GSH level in plasma was found to be 6.10 ± 1.37 μmol L⁻¹. The accuracy of the method was investigated by analysis of the plasma samples spiked with 1.0 μmol L⁻¹ of GSH and a recovery of 97.5% was obtained.     

Monitoring of the insecticide trichlorfon by phosphorus-31 nuclear magnetic resonance (31P NMR) spectroscopy

Trichlorfon is an organophosphorus insecticide, which is extensively being used for protection of fruit crops. Trichlorfon is a thermal labile compound, which cannot be easily determined by gas chromatography (GC) and has no suitable group for sensitive detection by high performance liquid chromatography (HPLC). In this study, a ³¹P nuclear magnetic resonance (³¹P NMR) has been described for monitoring of trichlorfon without any separation step. The quantitative works of ³¹P NMR spectroscopy has been performed in the presence of an internal standard (hexamethylphosphoramide). Limit of detection (LOD) for this method has been found to be 55 mg L⁻¹, without any sample preparation, and the linear working range was 150-5500 mg L⁻¹. Relative standard deviation (R.S.D.%) of the method for three replicates within and between days was obtained ≤9%. The average recovery efficiency was approximately 99-112%. This method was applied for monitoring trichlorfon in a commercial insecticide sample and tomato sample.     

An Algorithm for 3D Pore Space Reconstruction from a 2D Image Using Sequential Simulation and Gradual Deformation with the Probability Perturbation Sampler

The construction of a faithful 3D pore space model of a porous medium that could reproduce the macroscopic behavior of that medium is of great interest in various fields including medicine, material science, hydrology and petroleum engineering. A computationally efficient algorithm is developed that uses the probability perturbation method and sequential multiple-point statistics simulations to generate 3D stochastic and equiprobable representations of random porous media when only a 2D thin section image is available. By employing the probability perturbation method as a gradual deformation technique, the pore patterns of a single 2D image are deformed to generate a series of 2D stochastically simulated images. The 3D pore structure is then generated by simply stacking the 2D-simulated images. The quality of the 3D reconstruction is critically dependent on the rate of deformation and a simple general procedure for choosing this parameter is presented. Various criteria such as porosity, two-point auto-correlation function, multiple-point connectivity function, local percolation probability, absolute permeability obtained by lattice-Boltzmann method (LBM), formation factor and two-phase relative permeability calculations are used to validate the results. The method is tested on two random porous solids; Berea Sandstone and synthetic Silica, for which directly measured 3D micro-CT images are available. The stochastically reconstructed 3D pore space preserves the low- and high-order spatial statistics, the macroscopic flow properties and the microstructure of the 3D micro-CT images.     

Ultra-compact all-optical phase-controlled NAND,OR, XOR,XNOR, and NOT multi-function logic gate

Optical and Quantum Electronics - A theoretical analysis of the modulational instability (MI) in a nonlinear oppositely directional coupler with one channel fabricated from nonlinear medium having...     

Improved double-gate armchair silicene nanoribbon field-effect-transistor at large transport bandgap

The electrical characteristics of a double-gate armchair silicene nanoribbon field-effect-transistor(DG ASi NR FET)are thoroughly investigated by using a ballistic quantum transport model based on non-equilibrium Green's function(NEGF) approach self-consistently coupled with a three-dimensional(3D) Poisson equation. We evaluate the influence of variation in uniaxial tensile strain, ribbon temperature and oxide thickness on the on-off current ratio, subthreshold swing, transconductance and the delay time of a 12-nm-length ultranarrow ASi NR FET. A novel two-parameter strain magnitude and temperature-dependent model is presented for designing an optimized device possessing balanced amelioration of all the electrical parameters. We demonstrate that employing Hf O2 as the gate insulator can be a favorable choice and simultaneous use of it with proper combination of temperature and strain magnitude can achieve better device performance.Furthermore, a general model power(GMP) is derived which explicitly provides the electron effective mass as a function of the bandgap of a hydrogen passivated ASi NR under strain.     

Legendre Pseudospectral Approximation of Boussinesq Systems and Applications to Wave Breaking

In this paper, we propose a spectral projection of a regularized Boussinesq system for wave propagation on the surface of a fluid. The spectral method is based on the use of Legendre polynomials, and is able to handle time-dependent Dirichlet boundary conditions with spectral accuracy.The algorithm is applied to the study of undular bores, and in particular to the onset of wave breaking connected with undular bores. As proposed in [2], an improved version of the breaking criterion recently introduced in [5] is used. This tightened breaking criterion together with a careful choice of the relaxation parameter yields rather accurate predictions of the onset of breaking in the leading wave of an undular bore.     

Novel salep‐based chelating hydrogel for heavy metal removal from aqueous solutions

A novel optimized chelating hydrogel was synthesized via graft copolymerization of acrylamide and 2‐hydroxyethyl methacrylate (as two‐dentate chelating co‐monomer) onto salep (a multicomponent polysaccharide obtained from dried tubers of certain natural terrestrial orchids) using N,N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. Reaction parameters (N,N′‐methylenebisacrylamide and ammonium persulfate amounts as well as acrylamide/2‐hydroxyethyl methacrylate weight ratio) affecting the water absorption of the chelating hydrogel were optimized using a systematic method to achieve a hydrogel with high swelling capacity as possible. Heavy metal ion adsorption capacity of the optimized hydrogel for metal ions [Cu (II), Pb (II), Cd (II), and Cr (III)] were investigated in aqueous media containing different concentrations of these ions (5–50 ppm). The results showed that the hydrogel have great potential for heavy metal removal from aqueous solutions. The hydrogel formation was confirmed by Fourier transform infrared spectroscopy, and surface morphology study of the hydrogel was performed by scanning electron microscope. Copyright © 2016 John Wiley & Sons, Ltd.     

Calibration-free laser-induced plasma analysis of a metallic alloy with self-absorption correction

Identification and concentration measurement of constituent elements of a metallic alloy is demonstrated by calibration-free laser-induced breakdown spectroscopy (CF-LIBS) according to a special peak intensity-based model and considering the self-absorption effect. In this procedure, which is based on the line pair ratio method, the effect of line widths, though needs to be theoretically considered, may be approximately ignored. This is mainly true for the multiplet lines, but this property, in the case of some generic spectral lines in a measured spectrum, can be sometimes regarded. Initially, the optical penetration depth and therefrom self-absorption coefficient of each selected spectral line is calculated using the experimental (self-absorbed) intensity of the line. Then, the true (non-self-absorbed) intensity, which is basis of the conventional CF-LIBS calculation, is obtained through a recursive algorithm implemented by the MATLAB programming. In the experimental examination, the recorded spectrum reflects that the metallic alloy is consisted of gold, copper and silver. The concentration of elements is calculated with and without regarding self-absorption correction using 27 trios of spectral lines related to the elements. The average concentrations signify that the measurement error relative to the certified value for the concentration of the gold is modified from 3.56 % in the normal way to 0.34 % after applying self-absorption correction.