Synthesis,structure and mechanical properties of nanocomposites based on exfoliated nano magnesium silicate crystal and poly(acrylamide)

In this study, hydrolyzed polyacrylamide based nanocomposite (HPAM-NC) hydrogels crosslinked by chromium (III) acetate, was synthesized using free radical polymerization. The introduction of magnesium silicate nanocrystals (MSNCs) into the hydrolyzed polyacrylamide (HPAM) network endows the system with enhanced mechanical properties. The successful formation and crystalline behavior of HPAM-NC hydrogels was verified by Fourier Transform Infrared (FTIR) spectroscopy and X-Ray Diffraction (XRD) analyses. Field-Emission Scanning Electron Microscopy (FESEM) and rheology tests showed that the morphology and mechanical properties of HPAM-NC hydrogels were strongly influenced by different content of parameters including concentration of copolymer, nanoparticle and cross-linker. The results showed that this nanocomposite hydrogel is a moldable material so it can expand its application as value-added product.     

Combining engineering and chemistry for the selective continuous production of four different oxygenated compounds by photo-oxidation of cyclopentadiene using liquid and supercritical CO2 as solvents

A range of products is reported from the photo-oxidation of cyclopentadiene from photochemically generated singlet oxygen (¹O₂) using carbon dioxide (CO₂) as a solvent and 5,10,15,20-tetrakis-(pentafluorophenyl)porphyrin (TPFPP) as a CO₂-soluble photosensitizer. The endo-peroxide intermediate, generated from the reaction with singlet oxygen, is transformed into one of several different products in good yield depending on the conditions applied and by adding different reactors and reagents downstream of the photo-reactor, allowing the reaction products to be switched in one streamlined process. The addition of a thermal reactor facilitated the rearrangement of the endoperoxide to form Z-4,5-epoxy-2-pentanal. Quenching with thiourea yielded the syn-diol, (1R,3S)-cyclopent-4-ene-1,3-diol. Treatment with acid or base afforded furfuryl alcohol and 4-hydroxy-2-cyclopentenone respectively. High productivities for all products were obtained when compared to traditional batch reactions.     

Synthesis,characterization and immobilization of a novel mononuclear vanadium (V) complex on modified magnetic nanoparticles as catalyst for epoxidation of allyl alcohols

The 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine (tptz) undergoes hydrolysis in the presence of VO(SO₄) in an alkaline solution, affording mainly the bis(2‐pyridyl carbonyl)amid ) VO₂ complex, designated as [VO₂(bpca)]. Single‐crystal X‐ray crystallography revealed that the coordination of V in complex is a distorted square‐pyramid coordinated with three nitrogen of bis(2‐pyridyl carbonyl)amid ) ligand and two binding oxygen atoms. The prepared complex which successfully supported on modified Fe₃O₄ nanoparticles using tetraethylorthosilicate (TEOS) and (3‐aminopropyl)trimethoxysilane(APTMS)was designated as Fe₃O₄@SiO₂@APTMS@[VO₂(bpca)] complex (nanocatalyst). The complex and nanocatalyst were characterized by means of FT‐IR, XRD, VSM, SEM and TEM. The catalytic activity of [VO₂(bpca)] complex and Fe₃O₄@SiO₂@APTMS@complex as catalysts 1 and 2 were evaluated by the epoxidation of geraniol , 3‐methyl‐2‐buten‐1‐ol , trans‐2‐hexen‐1‐ol and 1‐octen‐3‐ol with 70–98% conversions and 95–100% selectivities. Based on the obtained results, the heterogeneity and reusability of the catalyst seems promising. In addition, the in vitro antibacterial activity of [VO₂ (bpca)] complex have also been evaluated and compared to the activities of other vanadium complexes, tptz ligand and two standard antibacterial drugs, Nalidixic acid and Vancomycin.     

(Benzyl isocyanide)gold(I) pyrimidine‐2‐thiolate complex: Synthesis and biological activity

The reaction of [(Me₂S)AuCl] with an equimolar amount of benzyl isocyanide (PhCH₂NC) ligand led to the formation of complex [(PhCH₂NC)AuCl] ( 1 ). The solid‐state structure of 1 was determined using the X‐ray diffraction method. Through a salt metathesis reaction, the chloride ligand in 1 was replaced by pyrimidine‐2‐thiolate (SpyN^?) to afford the complex [(PhCH₂NC)Au(η¹‐S‐Spy)] ( 2 ), which was characterized spectroscopically. The cytotoxic activities of 1 and 2 were evaluated against three human cancer cell lines: ovarian carcinoma (SKOV3), lung carcinoma (A549) and breast carcinoma (MCF‐7). Complex 2 showed higher cytotoxicity than cisplatin against SKOV3 and MCF‐7 cancer cell lines. It showed a strong anti‐proliferative activity with IC₅₀ of 7.80, 6.26 and 6.14 μM, compared with that measured for cisplatin which was 7.62, 12.36 and 11.47 μM, against A549, SKOV3 and MCF‐7 cell lines, respectively. The induction of cellular apoptosis by 2 was also studied on MCF‐7 cell line. Our results indicated that 2 could induce apoptosis in cancerous cells in a dose‐dependent manner.     

Self-assembled monolayers of organosulfur derivative on gold nanoparticles as electrochemical sensor for determination of isoprenaline

In this paper, the use of molecular self-assembled monolayers of 5-(1,3-dithiolan-2-eyl)-3-methyl banzen-1,2-diol (DMD) on gold nanoparticles was described (DMD-AuNPs). The redox properties of modified electrode at various scan rates were investigated by cyclic voltammetry. A pair of well-defined quasi-reversible redox peaks of DMD were obtained at the modified electrode. Dramatically enhanced electrocatalytic activity was exemplified at the DMD-AuNPs, as an electrochemical sensor to investigate the electro-oxidation of isoprenaline (IP). With this modified electrode, the oxidation potential of the IP was shifted about 235 mV toward a less positive potential value than that of an unmodified electrode. The values of electron transfer coefficients (α = 0.5), catalytic rate constant (ks = 9.2 s^?1) and diffusion coefficient (D = 8.9 × 10^?5 cm² s^?1) were calculated for IP. The response of catalytic current with IP concentration showed a linear relation in the range from 0.5 to 800 µM with a detection limit of 0.21 µM. Finally, this modified electrode was used for the determination of IP in IP injections.     

Magnetic dispersive solid phase extraction using modified magnetic multi-walled carbon nanotubes combined with electrothermal atomic absorption spectrometry for the determination of selenium

A novel magnetic dispersive solid phase extraction method using magnetic multi-walled carbon nanotubes modified with 5-mercapto-3-phenyl-1,3,4-thiadiazole-2-thione potassium salt (bismuthiol II) (MMWCNTs@Bis) as the sorbent was developed for the separation and preconcentration of inorganic selenium (IV) prior to its determination by electrothermal atomic absorption spectrometry. The prepared MMWCNTs@Bis sorbent was characterised by Fourier transform infrared spectroscopy, scanning electron microscopy, vibrating sample magnetometer and X-ray diffraction. Total selenium was determined after reduction of Se(VI) to Se(IV) by addition of hydrochloric acid and heating the mixture in a boiling water bath. Se(VI) concentration was determined from the difference between the amounts of total selenium and Se(IV). Under the optimised experimental conditions, an enhancement factor of 196 and a detection limit (based on 3S_b/m) of 0.003 µg L^?1 was obtained for aqueous samples. The relative standard deviation at 0.1 µg L^?1 concentration level of Se(IV) (n = 6) was found to be 5.2 and 7.7% for intra- and inter-day analysis, respectively. The method was successfully applied to the determination of inorganic selenium species in water and total selenium in food samples.     

Conditions for S′-formation in an Al-Cu-Mg alloy

DSC-measurements show in a simple and convincing manner that the precipitation of the metastableS-phase in an Al-2.1% Cu-1.3% Mg alloy is enhanced in the presence of lattice defects (dislocation loops, helices, dislocations), but is little influenced by pre-existing GPB-zones.

---

Zusammenfassung DSC-Untersuchungen zeigen auf einfache und überzeugende Weise, da\ die Bildung der metastabilen S-Phase in einer Al-Cu-Mg-Legierung (Al-2.1%, Cu 1.3 %Mg) in Gegenwart von Gitterdefekten (Versetzungsringe, Wendeln, Versetzungen) gesteigert, aber durch vorherige GPB-Zonen nur wenig beeinflu\t wird.

---

---

We are greatly indebted to Centre de Recherches de Voreppe S. A. for the preparation of the alloy.     

Syntheses of New Isocephems and Isodethiaoxacephems as Antimicrobial Agents

The cis-configurated isocephem 26 as well as isodethiaoxacephems 21 and 33 were synthesized (Schemes 4 and 5). The key step involves chlorination of the corresponding carbanions of 23, 18 , and 31 with CF₃SO₂Cl followed by internal alkylation. β-Lactams 3, 21, 26 , and 33 were found to possess biological activity against several pathogenic microorganisms in vitro. Electronic activation of the lactam moiety in isodethiaoxacephem 33 remarkably enhanced its biological activity.     

Electrolyte effect on mixed micelle and interfacial properties of binary mixtures of cationic and nonionic surfactants

In the present work, the adsorption behavior at the liquid-air interface and micellization characteristics of mixtures of cetyltrimethylammonium bromide (CTAB) and p-(1,1,3,3-tetramethylbutyl) polyoxyethylene (TritonX-100) in aqueous media containing different concentrations of NaBr were investigated by surface tension and potentiometry measurements. From plots of surface tension (gamma) as a function of solution composition and total surfactant concentration, we determined the critical micelle concentration (CMC), minimum surface tension at the CMC (gamma(CMC)), surface excess (Gamma(max)), and mean molecular surface area (A(min)). On the basis of regular solution theory, the compositions of the adsorbed film (Z) and micelles (X(M)) were estimated, and then the interaction parameters in the micelles (beta(M)) and in the adsorbed film phase (beta(sigma)) were calculated. For all mole fraction ratios, the results showed synergistically enhanced ability to form mixed micelles as well as surface tension reduction. Furthermore beta was calculated by considering nonrandom mixing and head group size effects. It was observed that, for both the planar air/aqueous interface and micellar systems, the nonideality decreased as the amount of electrolyte in the aqueous medium was increased. This was attributed to a decrease of the surface charge density caused by increasing the concentration of bromide ions.