Polyphenolic profiling of Ipomoea carnea Jacq. by HPLC-DAD and its implications in oxidative stress and cancer

Ipomoea carnea Jacq. is an important folklore medicinal plant, assessed for its underexplored biological potential. Antioxidant, cytotoxic, antiproliferative and polyphenolic profile of whole plant was evaluated using various techniques. Maximum extract recovery (29% w/w), phenolic [13.54 ± 0.27 μg GAE/mg dry weight (DW)] and flavonoid (2.11 ± 0.10 μg QE /mg DW) content were recorded in methanol-distilled water (1:1) flower extract. HPLC-DAD analysis quantified substantial amount of six different polyphenols ranging from 0.081 to 37.95 μg/mg extract. Maximum total antioxidant and reducing potential were documented in methanol-distilled water and acetone-distilled water flower extracts (42.62 ± 0.47 and 24.38 ± 0.39 μg AAE/mg DW) respectively. Ethanol-chloroform root extract manifested highest free radical scavenging (IC₅₀ of 61.22 μg/mL) while 94.64% of the extracts showed cytotoxicity against brine shrimps. Ethanol leaf extract exhibited remarkable activity against THP-1 cell line (IC₅₀ = 8 ± 0.05 μg/mL) and protein kinases (31 mm phenotype bald zone).     

Solvent effects on catalytic activity of manganese porphyrins with cationic,anionic and uncharged meso substituents: Indirect evidence on the nature of active oxidant species

Oxidation of cyclohexene and styrene with sodium periodate and tetra‐n‐butylammonium periodate (TBAP) catalyzed by MnT(3‐MePy)P(OAc), MnT(4‐SO₃)PP(OAc) and MnTPP(OAc) has been studied in water, methanol, acetonitrile and dichloromethane as solvents. The results show significant dependence of the product distribution on the type of solvent and the electronic nature of the aryl substituents introduced at the porphyrin periphery. While the oxidation of cyclohexene and styrene in the presence of MnT(3‐MePy)P(OAc) and MnTPP(OAc) in water (also in methanol) gave the corresponding epoxides as nearly the sole product, performing the reactions in the presence of MnT(4‐SO₃)PP(OAc) yielded the products of allylic oxidation, cyclohexene‐2‐ol and cyclohexene‐2‐one and acetophenone as the major products. In the case of styrene, performing the reaction in the presence of MnT(4‐SO₃)PP(OAc), MnT(3‐MePy)P(OAc) and MnTPP(OAc) in acetonitrile gave a mixture of styrene oxide and acetophenone as the products. Under the same conditions, the oxidation of cyclohexene afforded cyclohexene oxide as approximately the exclusive product. Furthermore, the oxidation of olefins in dichloromethane gave the corresponding epoxide as the exclusive products. The product distributions observed in the protic and aprotic solvents were used to provide indirect evidence on the relative contribution and reactivity of high valent manganese oxo and periodato Mn(III) porphyrin species to the oxidation reactions.     

Synthesis of Hexahydrospiro[pyrazolo[3,4‐b]quinoline‐4,1′‐pyrrolo[3,2,1‐ij]quinoline‐2′,5(1H,4′H)‐diones] from 5,6‐dihydro‐4H‐pyrrolo[3,2,1‐ij]quinoline‐1,2‐dione Using Fe3O4@Cu(OH)x as a Nanocatalyst

The tricyclic isatin, 5,6‐dihydro‐4H‐pyrrolo[3,2,1‐ij]quinoline‐1,2‐dione, undergoes three‐component, one‐pot reactions with 1‐aryl‐3‐methylpyrazole‐5‐amines and cyclohexane‐1,3‐diones producing hexacyclic spiro products, hexahydrospiro[pyrazolo[3,4‐b]quinoline‐4,1‐pyrrolo[3,2,1‐ij]quinoline‐2′,5(1H,4′H)‐diones]. Comparable spiro condensation products are also obtained using 4‐hydroxy‐2H‐1‐benzopyran‐2‐one in place of cyclohexane‐1,3‐diones.     

Nanogram/mL detection of nortriptyline: Preparation of a molecularly imprinted polymer for spectrophotometric determination of nortriptyline based on multivariate optimization methods

In this work, the molecularly imprinted polymer was used as a selective sorbent in solid‐phase extraction method for the spectrophotometric determination of nortriptyline at 239 nm. Molecularly imprinted polymer was synthesized by pyrrole as a functional monomer in the presence of nortriptyline as a template. Several factors, consist of the concentration of the monomer to template ratio, amount of initiator, stirring rate, reaction time, the pH of the buffer solution, amount of sorbent, loading time, shaking rate of loading, extraction time, and shaking rate of extraction were evaluated due to their effectiveness in the preparation and extraction capability of molecularly imprinted polymer. Multivariate optimization methods, such as Plackett‐Burman and central composite designs, were employed to find and optimize the significant factors. Under the selected optimal conditions, molecularly imprinted polymer showed a linear range from 0.1 to 100 µmol/L (0.026 to 26 µg/mL) nortriptyline, a detection limit of 10.3 nmol/L (2.7 ng/mL), a highly repeatable (relative standard deviation of 3.7%) and reproducible response (relative standard deviation of 4.6%), and a good selectivity in the presence of structurally related molecules. Furthermore, molecularly imprinted polymer showed high extraction efficiency and was successfully used for the determination of nortriptyline in real samples.     

An efficient synthesis of 2,2′-arylmethylene bis-(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) and 1,8-dioxooctahydroxanthenes using ZnO and ZnO-acetyl chloride

<正>2,2'-Arylmethylene bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) 4l-s produced from reaction between dimedone with various aldehydes in acetonitrile using ZnO as a catalyst;whereas in the presence of ZnO-acetyl chloride catalysts the reaction is limited to give only 1,8-dioxo-octahydroxanthenes 3a-k in very good yields.     

Methyl Methacrylate–Ethyleneglycol Dimethacrylate–Acrylic Acid Surface as Stationary Phase for Stir Bar Sorptive Extraction

A novel poly(methyl methacrylate–ethyleneglycol dimethacrylate–acrylic acid) film has been introduced for coating on stir bars to sorptive extraction (SBSE). The effects of different contents of porogen, monomer, cross-linker, modifier and initiator during the solvent or bulk polymerization step on the mechanical property and solvent resistant of prepared sorptive stir bars were investigated. The evaluation of results were caused to obtain the four prepared sorptive stir bars with good mechanical stability and excellent resistance to organic solvents. The extraction efficiency of these prepared sorptive stir bars were investigated by liquid desorption-liquid chromatography-ultraviolet detection (LD-LC-UV) using N-Nitrosodiphenylamine as target analyte. SBSE assays showed the sorptive stir bar that prepared using solution polymerization method had the better recovery for N-Nitrosodiphenylamine in water samples. This sorptive stir bar showed good linearity and acceptable recoveries, as well as advantages such as sensitivity, simplicity, low cost and high feasibility. Based on atomic force microscopy (AFM) results, the average pore size of optimum prepared stir bar using solvent polymerization method was obtained ~9 nm. The thermal gravity (TG) and differential scanning calorimetric (DSC) results showed this polyacrylate film has high thermal stability.     

Optimization of the extraction of paclitaxel from Taxus baccata L. by the use of microwave energy

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for the extraction of paclitaxel (Taxol) from the needles of yew trees Taxus baccata L. grown in Iranian habitats. The samples, immersed in a methanol-water mixture, were irradiated with microwaves in a closed-vessel system. The method was evaluated using a factorial design approach based on parameters such as extraction time, temperature, methanol concentration in water (v/v), and the ratio of grams of sample to 10 mL of solvent. Statistical treatment of the results revealed that the selected parameters were all significant except the extraction time. Optimum conditions would be 1.5 g samples in 10 mL solvent (90% methanol), an extraction temperature of 95 degrees C, and an extraction time of 7 min. The extracts has been analyzed by reverse-phase high-performance liquid chromatography with UV detection (LC/UV) at 227 nm for quantification. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used for confirmation. The main advantage of the proposed MAE method versus conventional solvent extraction (CSE) are the considerable reductions in time (7 min versus 16 h) and in solvent consumption (20 mL versus 150 mL). The MAE procedure yielded extracts that could be analyzed directly without any preliminary clean-up or solvent exchange steps. Both extraction methods show RSDs lower than 10% and lead to comparable recoveries of paclitaxel (87-92%).     

Polymer Nanocomposites for Emulsion‐Based Coatings and Adhesives

Emulsion‐based coatings and adhesives are in growing demand due to an increased awareness of health and safety issues arising from solvent‐based polymer manufacturing processes. However, emulsion‐based techniques often require additional development to achieve equal or better application performance compared to solvent‐based processes. The inclusion of nanoparticles in emulsion‐based coatings and adhesives can be considered as a promising means to enhance performance. This paper reviews the current progress on the synthesis of emulsion‐based nanocomposites for coating and adhesive applications and addresses the principles and techniques for nanoparticle dispersions and their inclusion into polymer latexes. The effects of nanoparticle shape and size on the enhancement of nanocomposite properties are also highlighted. Among the reinforcing nanoparticles such as nanoclays, carbon nanotubes, and cellulose nanocrystals (CNCs), CNCs are promising due to their abundance, nontoxicity, and accessible surface hydroxyl groups, which facilitate their compatibility with polymer latexes via physical and chemical treatments.     

Synthesis of selective inhibitors against V. cholerae sialidase and human cytosolic sialidase NEU2

Sialidases or neuraminidases catalyze the hydrolysis of terminal sialic acid residues from sialyl oligosaccharides and glycoconjugates. Despite successes in developing potent inhibitors specifically against influenza virus neuraminidases, the progress in designing and synthesizing selective inhibitors against bacterial and human sialidases has been slow. Guided by sialidase substrate specificity studies and sialidase crystal structural analysis, a number of 2-deoxy-2,3-dehydro-N-acetylneuraminic acid (DANA or Neu5Ac2en) analogues with modifications at C9 or at both C5 and C9 were synthesized. Inhibition studies of various bacterial sialidases and human cytosolic sialidase NEU2 revealed that Neu5Gc9N(3)2en and Neu5AcN(3)9N(3)2en are selective inhibitors against V. cholerae sialidase and human NEU2, respectively.