Convenient Synthesis of 14‐Aryl‐14‐H‐dibenzo[a,j]xanthenes Catalyzed by Acyclic Brønsted Acidic Ionic Liquid [H—NMP]+[HSO4]− under Microwave Irradiation

Efficient method for direct preparation of 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes through condensation of β‐naphthol with various aromatic aldehydes in the presence of the catalytic amount of [H—NMP]⁺[HSO₄]^? under microwave irradiation was described. This method has the advantages such as; very easy reaction workup, absolute separation of catalyst from the reaction mixture and smooth recyclability of catalyst. In this reaction 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes were obtained as desired products in excellent yields and short reaction times via green and one‐pot procedure.     

Synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones using nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl2 nanoparticles

Nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl₂ (nano‐[Zn‐2BSMP]Cl₂) as a nanoparticle Schiff base complex and a catalyst was introduced for the solvent‐free synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones by the multicomponent condensation reaction of various aromatic aldehydes, β‐naphthol, ethyl acetoacetate, and phenyl hydrazine at room temperature.     

Supported Nitric Acid on Silica Gel and Polyvinyl Pyrrolidone (PVP) as an Efficient Oxidizing Agent for the Oxidation of Urazoles and Bis-urazoles

A method for the oxidation of a good range of urazoles and bis-urazoles to the corresponding triazolinediones by supported nitric acid on silica gel (SiO₂-HNO₃) and/or polyvinyl pyrrolidone (PVP-HNO₃) is described. Reactions have been carried out heterogeneously at room temperature in dichloromethane with good to excellent yields.     

Antitumor metallothiosemicarbazonates: structure and antitumor activity of palladium complex of phenanthrenequinone thiosemicarbazone

The crystal structure of the potential antitumor metal compound, viz. chloro, mono(phenanthrenequinone thiosemicarbazonato) palladium(II) dimethyl formamide solvate, is reported. The central palladium(II) atom is in a square planar environment provided by the tridentate, monoanionic thiosemicarbazone ligand and the ancillary chloride ion. The compound exhibited remarkable activity against drug-sensitive and drug-resistant breast cancer cell lines and was relatively nontoxic toward the normal mammary epithelial cells. The drug-induced killing effect against breast cancer cell lines was predominantly mediated via apoptosis, a physiologic form of cell death.     

Solubility Data of Diazepam in Binary and Ternary Mixtures of PEGs 200 and 400 with N-Methyl Pyrrolidone and Water at 298.2 K: Experimental Data and Modeling

Experimental solubilities of diazepam in binary and ternary solvents of polyethylene glycols 200 and 400 with N-methyl pyrrolidone and water at T = 298.2 K are reported. The Jouyban–Acree model was used to fit solubility data of diazepam in the binary and ternary solvent mixtures (106 data points) in which the overall mean relative deviations (OMRD %) is 13.1 % and the prediction OMRD % is 31.7 %. The combined version of the Jouyban–Acree model with Hansen solubility parameters was used for fitting and predicting the solubility data and the OMRDs % are 10.0 and 20.8 %, respectively. Also, the previously proposed trained versions of the Jouyban–Acree model were used for predicting the reported data in this work and all results are listed in the tables. The density of the solute-free solvent mixtures were measured and employed to calculate the constants of the Jouyban–Acree model and then the densities of the saturated solutions were predicted.     

An efficient one-pot multi-component synthesis of 3,4,5-substituted furan-2(5H)-ones catalyzed by tetra-n-butylammonium bisulfate

A facile one-pot synthesis of 3,4,5-substituted furan-2(5H)-one derivatives from a three-component reaction of aniline derivatives, dialkylacetylenedicarboxylates and aromatic aldehydes under mild conditions using tetra-n-butylammonium bisulfate as a catalyst has been developed.     

Efficient One‐pot Synthesis of Alkyl 3‐(alkyl)‐4‐methyl‐2‐thioxo‐2,3‐dihydrothiazole‐5‐carboxylates in a Multi Component Reaction

A simple and efficient one‐pot synthesis of alkyl 2‐(alkyl)‐4‐methyl‐2‐thioxo‐2,3‐dihydrothiazole‐5‐carboxylates from the reaction of primary alkylamines and carbon disulfide in the presence of 2‐chloro‐1,3‐dicarbonyl compounds is described. This new protocol has several advantages such as lack of necessity of the catalyst, good yields, mild conditions and short times for reaction.     

Uranium recovery from UCF liquid waste by nanoporous MCM-41: breakthrough capacity and elution behavior studies

Adsorption and recovery of uranium by nanoporous MCM-41 from aqueous solutions (synthetic solution and uranium conversion facility liquid waste) were investigated by use of a fixed-bed column (1.2 cm diameter and 3.0 cm height). Adsorption was carried out at flow rates 0.2 and 0.5 mL min^?1, which correspond to retention times of 10 and 6 min. The maximum breakthrough capacity for uranium ions was achieved by use of nanoporous MCM-41 at the optimum pH of 3.6 and flow rate 0.2 mL min^?1 (61.95 μg g^?1). The Thomas and Yan models were applied to the experimental data, by use of linear regression, to determine the characteristics of the column for process design. The breakthrough curves calculated from the models were in good agreement with the experimental data. The elution behavior of uranium on nanoporous MCM-41 was studied with different eluents; the results showed that 0.1 M HCl is good eluent for uranium recovery. The regenerated column could be used in a multitude of adsorption–desorption cycles.     

In Silico and Experimental Characterization of Chimeric Bacillus thermocatenulatus Lipase with the Complete Conserved Pentapeptide of Candida rugosa Lipase

Lipases are one of the highest value commercial enzymes as they have broad applications in detergent, food, pharmaceutical, and dairy industries. To provide chimeric Bacillus thermocatenulatus lipase (BTL2), the completely conserved pentapeptide (¹¹²Ala-His-Ser-Gln-Gly¹¹⁶) was replaced with similar sequences (²⁰⁷Gly-Glu-Ser-Ala-Gly²¹¹) of Candida rugosa lipase (CLR) at the nucleophilic elbow region. For this purpose, three mutations including A112G, H113E, and Q115A were inserted in the conserved pentapeptide sequence of btl2 gene. Based on the crystal structures of 2W22, the best structure of opened form of the chimeric lipases were garnered using the MODELLER v9.10 software. The native and chimeric lipases were docked to a set of ligands, and a trial version of Molegro Virtual Docker (MVD) software was used to obtain the energy values. Docking results confirmed chimeric lipase to be better than the native lipase. Following the in silico study, cloning experiments were conducted and expression of native and chimeric btl2 gene in Pichia pastoris was performed. The native and chimeric lipases were purified, and the effect of these mutations on characteristics of chimeric lipase studied and then compared with those of native lipase. Chimeric lipase exhibited 1.6-fold higher activity than the native lipase at 55 °C. The highest percentage of both lipases activity was observed at 60 °C and pH of 8.0. The ion Ca²⁺ slightly inhibited the activity of both lipases, whereas the organic solvent enhanced the lipase stability of chimeric lipase as compared with the native lipase. According to the results, the presence of two glycine residues at the conserved pentapeptide region of this chimeric lipase (¹¹² Gly-Glu-Ser-Ala-Gly ¹¹⁶) may increase the flexibility of the nucleophilic elbow region and affect the enzyme activity level.     

Cathodic electrodeposition and characterization of nanostructured Y2O3 from chloride solution Part I: Effect of current density

Nanoparticles, nanospheres and nanorods of Y(OH)₃ and Y₂O₃ were prepared via cathodic electrodeposition from chloride bath through applying different current densities. First, yttrium hydroxide precursors were cathodically grown on the cathode surface at the current densities of 2, 1, 0.5, 0.25 and 0.1 mA cm^?2. Then hydroxide powders were heat-treated at 600°C for 3 h. The composition, crystal structure and morphology of the prepared oxide and hydroxide products were investigated by means of differential scanning calorimetery (DSC), X-ray diffraction (XRD), scanning and transmission electron microscopes (SEM and TEM) and FT-IR spectroscopy. Mechanism of base electrogeneration at the applied conditions, and intercalation of chloride ions in the deposit structure during the electrodeposition were proposed and confirmed by the XRD and TG analyses. The results showed that the structural and morphological properties of the products are directly dictated by the applied current density and it can be recognized as the main factor affecting on the cathodic electrodeposition of Y₂O₃.