Methyl Methacrylate–Ethyleneglycol Dimethacrylate–Acrylic Acid Surface as Stationary Phase for Stir Bar Sorptive Extraction

A novel poly(methyl methacrylate–ethyleneglycol dimethacrylate–acrylic acid) film has been introduced for coating on stir bars to sorptive extraction (SBSE). The effects of different contents of porogen, monomer, cross-linker, modifier and initiator during the solvent or bulk polymerization step on the mechanical property and solvent resistant of prepared sorptive stir bars were investigated. The evaluation of results were caused to obtain the four prepared sorptive stir bars with good mechanical stability and excellent resistance to organic solvents. The extraction efficiency of these prepared sorptive stir bars were investigated by liquid desorption-liquid chromatography-ultraviolet detection (LD-LC-UV) using N-Nitrosodiphenylamine as target analyte. SBSE assays showed the sorptive stir bar that prepared using solution polymerization method had the better recovery for N-Nitrosodiphenylamine in water samples. This sorptive stir bar showed good linearity and acceptable recoveries, as well as advantages such as sensitivity, simplicity, low cost and high feasibility. Based on atomic force microscopy (AFM) results, the average pore size of optimum prepared stir bar using solvent polymerization method was obtained ~9 nm. The thermal gravity (TG) and differential scanning calorimetric (DSC) results showed this polyacrylate film has high thermal stability.     

Optimization of the extraction of paclitaxel from Taxus baccata L. by the use of microwave energy

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for the extraction of paclitaxel (Taxol) from the needles of yew trees Taxus baccata L. grown in Iranian habitats. The samples, immersed in a methanol-water mixture, were irradiated with microwaves in a closed-vessel system. The method was evaluated using a factorial design approach based on parameters such as extraction time, temperature, methanol concentration in water (v/v), and the ratio of grams of sample to 10 mL of solvent. Statistical treatment of the results revealed that the selected parameters were all significant except the extraction time. Optimum conditions would be 1.5 g samples in 10 mL solvent (90% methanol), an extraction temperature of 95 degrees C, and an extraction time of 7 min. The extracts has been analyzed by reverse-phase high-performance liquid chromatography with UV detection (LC/UV) at 227 nm for quantification. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used for confirmation. The main advantage of the proposed MAE method versus conventional solvent extraction (CSE) are the considerable reductions in time (7 min versus 16 h) and in solvent consumption (20 mL versus 150 mL). The MAE procedure yielded extracts that could be analyzed directly without any preliminary clean-up or solvent exchange steps. Both extraction methods show RSDs lower than 10% and lead to comparable recoveries of paclitaxel (87-92%).     

Polymer Nanocomposites for Emulsion‐Based Coatings and Adhesives

Emulsion‐based coatings and adhesives are in growing demand due to an increased awareness of health and safety issues arising from solvent‐based polymer manufacturing processes. However, emulsion‐based techniques often require additional development to achieve equal or better application performance compared to solvent‐based processes. The inclusion of nanoparticles in emulsion‐based coatings and adhesives can be considered as a promising means to enhance performance. This paper reviews the current progress on the synthesis of emulsion‐based nanocomposites for coating and adhesive applications and addresses the principles and techniques for nanoparticle dispersions and their inclusion into polymer latexes. The effects of nanoparticle shape and size on the enhancement of nanocomposite properties are also highlighted. Among the reinforcing nanoparticles such as nanoclays, carbon nanotubes, and cellulose nanocrystals (CNCs), CNCs are promising due to their abundance, nontoxicity, and accessible surface hydroxyl groups, which facilitate their compatibility with polymer latexes via physical and chemical treatments.     

Synthesis of selective inhibitors against V. cholerae sialidase and human cytosolic sialidase NEU2

Sialidases or neuraminidases catalyze the hydrolysis of terminal sialic acid residues from sialyl oligosaccharides and glycoconjugates. Despite successes in developing potent inhibitors specifically against influenza virus neuraminidases, the progress in designing and synthesizing selective inhibitors against bacterial and human sialidases has been slow. Guided by sialidase substrate specificity studies and sialidase crystal structural analysis, a number of 2-deoxy-2,3-dehydro-N-acetylneuraminic acid (DANA or Neu5Ac2en) analogues with modifications at C9 or at both C5 and C9 were synthesized. Inhibition studies of various bacterial sialidases and human cytosolic sialidase NEU2 revealed that Neu5Gc9N(3)2en and Neu5AcN(3)9N(3)2en are selective inhibitors against V. cholerae sialidase and human NEU2, respectively.     

A Simple Synthesis of Stable Phosphorus Ylides from Indole and Some of Its Derivatives

Stable crystalline phosphorus ylides were obtained in excellent yields from the 1:1:1 addition reaction between triphenylphosphine and dialkyl acetylenedicarboxylates in the presence of strong NH acids, such as indole and 2-methyl indole, 3-methyl indole, and 5-boromo indole. These stable ylides exist in a solution as a mixture of two geometrical isomers as a result of the restricted rotation around the carbon–carbon partial double bond resulting from the conjugation of the ylide moiety with the adjacent carbonyl group.     

Covalent Functionalization of Pristine and Ga-Doped Boron Phosphide Nanotubes with Imidazole

Abstract

Density functional theory (DFT) calculations at the B3LYP/6–31G* level were performed to investigate covalent functionalization of imidazole on pristine (in gas and H₂O phases) and Ga-doped BPNT models in terms of energetic, geometric, and electronic properties. The results show that imidazole, as a functional group, prefers to be adsorbed via its nitrogen atom on the pristine, Ga_B, and Ga_P nanotube models. The adsorption energy of imidazole on the (6,0) zigzag BPNT in gas and solvent phases is ?0.76 and ?1.11 eV, respectively, and about 0.38 and 0.43 electron are transferred from the imidazole to nanotube in the phases. The presence of a polar solvent increases the electron donor of imidazole molecule. The results show that Ga doping can significantly enhance the adsorption energy of imidazole on the nanotube models to about 95%.

Moreover, the imidazole adsorption on the pristine and Ga-doped BPNT models has not significant changes in the energy gap of the nanotube models and it is slightly changed after covalent functionalization process. This study may provide new insight to the development of functionalized boron phosphide nanotubes for generation of the new hybrid compounds especially in drug delivery systems for virtual applications.     

Ab Initio Study of Conformational Properties of Heteroatom-Containing 1,2-Bisketene Analogues

Abstract

Minimum-energy and transition-state geometries of 4-oxobuta-1,3-diene-1-thione, buta-1,3-diene-1,4-dithione, 4-selenoxobuta-1,3-diene-1-thione, 4-selenoxobuta-1,3-diene-1-one, and buta-1,3-diene-1,4-diselenone were calculated using HF, B3LYP, and MP2 levels of theory and 6–31 + G* basis set by rotation around the related ?C?C? single bonds. In all of the above-mentioned molecules, the s-trans conformation was obtained as the most stable conformer with the 180° dihedral angle. In buta-1,3-diene-1,4-dithione, 4-selenoxobuta-1,3-diene-1-thione, and buta-1,3-diene-1,4-diselenone, the s-cis form of these compounds corresponded to the other energy-minimum geometry. Their skew geometries, with torsional angles approximately 100°, were a transition state for conformational interconversion between the two global minima forms. In 4-oxobuta-1,3-diene-1-thione and 4-selenoxobuta-1,3-diene-1-one, geometries with the C?C?C?C dihedral angles about 51 and 43° (respectively) were attributed to the second energy-minimum geometry. Transition-state structures from both molecules were found in the torsional angles at about 0 and 100°.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.

GRAPHICAL ABSTRACT     

Chemical composition and antimicrobial activity of the essential oil of Anthemis altissima L. var. altissima

The essential oil obtained from the flowering parts of Anthemis altissima L. var. altissima was analysed by gas chromatography and gas chromatography mass spectroscopy. In this study, 34 compounds representing 98.76% of the essential oil were identified. The main components were α-terpineol (26.42%), β-pinene (9.23%), cis-chrysanthenyl acetate (6.30%), globulol (5.36%), n-tricosane (4.41%), terpinen-4-ol (4.08%) and 1,8 cineole (3.84%). Antibacterial activities of the essential oil and its two major components (α-terpineol and β-pinene) were determined using microdilution method against both Gram-positive (Staphylococcus aureus, Bacillus subtilis, Staphylococcus epidermidis) and Gram-negative (Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae) bacteria. The essential oil showed a broad-spectrum antibacterial activity (MICs ranged from 3.13 to 6.25?μL?mL(-1)). It was found that α-terpineol with minimum inhibitory concentration (MIC) values of the range 0.87-1.56?μL?mL(-1) was a more potent antibacterial agent than β-pinene with MIC values of the range 1.56-6.25?μL?mL(-1). All of them, the essential oil, β-pinene and α-terpineol, were more effective against Gram-positive bacteria than Gram-negative ones.     

One-pot Crabbé homologation-radical cascade cyclisation with memory of chirality

The tandem Crabbé homologation-radical rearrangement of terminal enediynes leads, in a one-pot procedure, to the enantioselective synthesis of six- and seven-membered ring α-aminoesters bearing a quaternary stereocenter based on the phenomenon of memory of chirality.     

NaBH4/DOWEX(R)50WX4: A Convenient Reducing System for Fast and Efficient Reduction of Carbonyl Compounds to Their Corresponding Alcohols

The reduction of a variety of carbonyl compounds was efficiently carried out with NaBH₄/DOWEX(R)50WX4 system. The reactions were performed to give the corresponding alcohols derivatives in perfect yields in THF at room temperature. Reduction of acyloins and a‐diketones by this reducing system produced efficiently the corresponding vicinal diols. Also, the reduction of aldehydes over ketones has been accomplished successfully by this system. Regioselectivity of this system was also investigated with exclusive 1,2‐reduction of conjugated carbonyl compounds to their corresponding allylic alcohols in high to excellent yields.