Convenient Synthesis of 14‐Aryl‐14‐H‐dibenzo[a,j]xanthenes Catalyzed by Acyclic Brønsted Acidic Ionic Liquid [H—NMP]+[HSO4]− under Microwave Irradiation

Efficient method for direct preparation of 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes through condensation of β‐naphthol with various aromatic aldehydes in the presence of the catalytic amount of [H—NMP]⁺[HSO₄]^? under microwave irradiation was described. This method has the advantages such as; very easy reaction workup, absolute separation of catalyst from the reaction mixture and smooth recyclability of catalyst. In this reaction 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes were obtained as desired products in excellent yields and short reaction times via green and one‐pot procedure.     

Amplified cathodic electrochemiluminescence of luminol based on zinc oxide nanoparticle modified Ni-foam electrode for ultrasensitive detection of amoxicillin

Journal of Solid State Electrochemistry - Here is reported a new feasible and facile method for the determination of amoxicillin by the electrochemiluminescence (ECL) method. The ECL signal was...     

N,N ′-Diiodo-N,N′-1,2-ethanediylbis(p-toluenesulfonamide) as an Efficient Catalyst for Acetylation of Alcohols,Phenols, Amines,and Thiols Under Solvent-Free Conditions

N,N′-Diiodo-N,N′-1,2-ethanediylbis(p-toluenesulfonamide) (NIBTS) is a highly efficient catalyst for the acetylation of alcohols, phenols, amines, and thiols under solvent-free conditions. Primary, secondary, tertiary alcohols; phenols; amines; and thiols can be easily acetylated in good to excellent yields at 80 °C.     

Ab Initio Study of Conformational Properties of Heteroatom-Containing 1,2-Bisketene Analogues

Abstract

Minimum-energy and transition-state geometries of 4-oxobuta-1,3-diene-1-thione, buta-1,3-diene-1,4-dithione, 4-selenoxobuta-1,3-diene-1-thione, 4-selenoxobuta-1,3-diene-1-one, and buta-1,3-diene-1,4-diselenone were calculated using HF, B3LYP, and MP2 levels of theory and 6–31 + G* basis set by rotation around the related ?C?C? single bonds. In all of the above-mentioned molecules, the s-trans conformation was obtained as the most stable conformer with the 180° dihedral angle. In buta-1,3-diene-1,4-dithione, 4-selenoxobuta-1,3-diene-1-thione, and buta-1,3-diene-1,4-diselenone, the s-cis form of these compounds corresponded to the other energy-minimum geometry. Their skew geometries, with torsional angles approximately 100°, were a transition state for conformational interconversion between the two global minima forms. In 4-oxobuta-1,3-diene-1-thione and 4-selenoxobuta-1,3-diene-1-one, geometries with the C?C?C?C dihedral angles about 51 and 43° (respectively) were attributed to the second energy-minimum geometry. Transition-state structures from both molecules were found in the torsional angles at about 0 and 100°.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.

GRAPHICAL ABSTRACT     

Covalent Functionalization of Pristine and Ga-Doped Boron Phosphide Nanotubes with Imidazole

Abstract

Density functional theory (DFT) calculations at the B3LYP/6–31G* level were performed to investigate covalent functionalization of imidazole on pristine (in gas and H₂O phases) and Ga-doped BPNT models in terms of energetic, geometric, and electronic properties. The results show that imidazole, as a functional group, prefers to be adsorbed via its nitrogen atom on the pristine, Ga_B, and Ga_P nanotube models. The adsorption energy of imidazole on the (6,0) zigzag BPNT in gas and solvent phases is ?0.76 and ?1.11 eV, respectively, and about 0.38 and 0.43 electron are transferred from the imidazole to nanotube in the phases. The presence of a polar solvent increases the electron donor of imidazole molecule. The results show that Ga doping can significantly enhance the adsorption energy of imidazole on the nanotube models to about 95%.

Moreover, the imidazole adsorption on the pristine and Ga-doped BPNT models has not significant changes in the energy gap of the nanotube models and it is slightly changed after covalent functionalization process. This study may provide new insight to the development of functionalized boron phosphide nanotubes for generation of the new hybrid compounds especially in drug delivery systems for virtual applications.     

Nitrogen doped nano porous graphene as a sorbent for separation and preconcentration trace amounts of Pb,Cd and Cr by Ultrasonic assisted in‐syringe dispersive micro solid phase extraction

Nitrogen doped nano porous graphene was used as an efficient sorbent in solid‐phase extraction process for simultaneous separation and pre‐concentration of metal ions lead (II), cadmium(II), and chromium(III)) in biological samples. Ultrasonic assisted in‐syringe dispersive micro solid phase extraction coupled with micro sampling atomic absorption spectrometry was utilized for the determination of metal ions. Nitrogen doped nano porous graphene was synthesized as a nano sorbent by chemical vapour deposition method. Methane and aniline were used as carbon and nitrogen sources. The characterization of sorbent was performed by field emission scanning electron microscope, transmission electron microscopy, atomic force microscope, fourier transform infrared, chemical element analysis and raman analysis. Effective parameters on the extraction efficiency such as pH, sorbent dosage, eluent volume and eluent concentration were optimized by central composite design and desirability function. Experimental results indicate that the optimal conditions for this extraction were pH = 6.4, 1.42 mg of sorbent, 100 μL of eluent, and 0.84 mol L^‐1 of eluent concentration. The detection limits are as low as 1.5, 0.3 and 0.9 μg L^‐1 for lead, cadmium, and chromium, respectively. The intra‐day precisions were 3.6, 4.38 and 2.94 and Inter‐day precision were 4.83, 5.26 and 4.52 for lead, cadmium, and chromium, respectively. Method performance was investigated by determination of mentioned heavy metals in complicated biological matrixes such as human plasma, urine and saliva samples with good recoveries.     

Magnetically nano core–shell Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@Cu(OH)<Subscript>x</Subscript>: a highly efficient and reusable catalyst for rapid and green reduction of nitro compounds

Magnetically separable nano core–shell Fe₃O₄@Cu(OH)_x with 22 % Cu content was prepared by the addition of sodium hydroxide to a mixture of CuCl₂·2H₂O and nano Fe₃O₄ in water. Characterization of the impregnated copper hydroxide was carried out by X-ray fluorescence (XRF), X-ray diffraction (XRD) atomic absorption spectroscopy (AAS), scanning electron microscopy (SEM), value stream mapping (VSM) and Brunauer–Emmett–Teller (BET) analysis. The core–shell nanocatalyst exhibited the excellent catalytic activity toward reduction of various nitro compounds to the corresponding amines with NaBH₄. All reactions were carried out in H₂O (55–60 °C) within 3–15 min to afford amines in high to excellent yields. Reusability of core–shell Cu(OH)_x catalyst was examined 9 times without significant loss of its catalytic activity.     

Theoretical investigation of the weak interactions of rare gas atoms with silver clusters by resonance Raman spectroscopy modeling

The interactions of rare gas atoms (Rg = Ar, Kr, and Xe) with small neutral and cationic silver clusters have been investigated by density functional methods and the effect of these weak interactions on the resonance Raman spectra of the complexes has been evaluated. The resonance Raman technique that depends on the properties of ground and excited state, seems deeply sensitive to the weak rare gas–metal cluster interactions, and the use of inert gases has been proven to be an excellent approach to recognize the ability of this technique to detect extremely weak interactions. In this work, for , and complexes the IR, normal and resonance Raman spectra have been calculated and the effect of rare gas–cluster stretching vibration ( ) on the pattern and the relative intensities of different spectra have been investigated. The resonance Raman spectra for the weakly interacted complexes (with the interaction energies less than ?2.0 kcal/mol) exhibit the vibration with the detectable intensity that its intensity increases by going from Ag₆–Ar to Ag₆–Xe complex. Moreover, the resonance Raman spectra (based on the excited state gradient approximation) for high intensity nearly degenerate excited states, proved the effect of accumulation of the excited state charge density on the relative intensity of vibration.     

Synthesis and properties of thermally stable polyimides bearing pendent fluorene moieties

A new diamine monomer containing fluorene unit, 3,5‐diamino‐N‐(9H‐fluoren‐2‐yl)benzamide was successfully synthesized via the condensation of 2‐aminofluorene and 3,5‐dinitrobenzoyl chloride and subsequent reduction of the dinitro compound. A series of novel aromatic polyimides having pendent fluorenamide moieties were prepared from the reaction of the diamine monomer and various tetracarboxylic dianhydrides by a conventional two‐step polymerization process. The polyimides were obtained in quantitative yields with inherent viscosities of 0.33–0.44 dl/g. The resulting polymers dissolved in N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide. The glass transition temperature of these polymers was in the range of 261–289°C. They were fairly stable up to a temperature around 450°C and lost 10% weight in the range of 498–556°C in nitrogen. The UV–vis absorption spectra showed that all of the polymers had absorption maxima around 320 nm. Cyclic voltammograms of the polyimides revealed an oxidation wave with a peak around 1.3 V. Copyright © 2014 John Wiley & Sons, Ltd.     

高有机可溶性聚酰胺负载磷钨酸(PW_(12)/PA):合成1,3,5-三芳基-2-吡唑啉衍生物的高效催化剂(英文)

A novel compound constructed from polyoxometalate (H3PW12O40,PW12) and poly(amidoamine) (PA) was prepared at room temperature in an aqueous solution by an impregnation method.A series of novel 1,3,5-triaryl-2-pyrazoline derivatives was synthesized by the reaction between chalcone and phenylhydrazine in the presence of the title compound,PW12/PA,in high yields.The structures of the compounds obtained were determined by IR and 1H NMR spectra.