Kinked crack analysis by a hybridized boundary element/boundary collocation method

In this research a two dimensional displacement discontinuity method (which is a kind of indirect boundary element method) using higher order elements (i.e. a source element with a cubic variation of displacement discontinuities having four sub-elements) is used to obtain the displacement discontinuities along each boundary element. In this paper, three kinds of the higher order boundary elements are used: the ordinary elements, the kink elements and the special crack tip elements.The boundary collocation technique is used for the calculation of the displacement discontinuities at the center of each sub-elements. Again a special boundary collocation technique is used to treat the kinked source elements occur in the crack analysis. Considering the two source elements (each having four sub-elements) joined at a corner (kink point). The collocation points in the cubic element model which are outside of the kink point are moved to the crack kink then the displacement discontinuities on the left and right sides of the kink are calculated. The displacement discontinuities of the kink point are obtained by averaging the corresponding values of its left and right sides. The special crack tip elements are also treated by the boundary displacement collocation technique considering the singularity variation of the displacements and stresses near the crack tip. Some simple example problems are solved numerically by the proposed method. The numerical results are compared with the corresponding results obtained by the previous methods cited in the literature. This comparison shows a very good agreement between the results and verify the accuracy and validity of the proposed method.     

以金属硫酸氢盐为催化剂在无溶剂条件下高效合成3,4-二氢嘧啶-2(1H)-酮

以金属硫酸氢盐M(HSO4)n(Ca(HSO4)2,Zn(HSO4)2和过硫酸氢钾制剂oxone○R)为催化剂催化醛、1,3-二羰基化合物和尿素进行缩合反应,在90℃及无溶剂的条件下高收率、一锅法合成了3,4-二氢嘧啶-2(1H)-酮.     

Synthesis of imidazo[4,5-<Emphasis Type="Italic">a</Emphasis>]acridones and imidazo[4,5-<Emphasis Type="Italic">a</Emphasis>]acridines as potential antibacterial agents

Abstract  New imidazo[4,5-a]acridone derivatives were synthesized from the rearrangement of 3H-imidazo[4′,5′:3,4]benzo[c]isoxazoles. New imidazo[4,5-a]acridines were obtained from the reaction of imidazo[4,5-a]acridones in boiling POCl₃. All of these compounds exhibited antimicrobial activities comparable to streptomycin as reference drug. Graphical abstract        

Facile and Mild Synthesis and Characterization of Some New Diazo Dyes on the Basis of Schiff Bases in the Presence of Nanocrystalline Magnesium Oxide as a Base Catalyst under Solvent‐free Conditions

In this research, some new diazo dyes including Schiff base have been synthesized by the condensation reaction between ethylenediamine and derivatives of salicylaldehyde containing diazo functional groups in the presence of nanocrystalline magnesium oxide as a solid base catalyst under solvent‐free conditions. Nanocrystalline magnesium oxide has been characterized by XRD, BJH and TEM techniques. The corresponding products have been obtained in excellent yields and high purity. All of the obtained diazo‐Schiff bases are highly colored and can be applicable as useful diazo dyes and characterized by spectroscopy data.     

A mathematical model for bioconvection flow of Williamson nanofluid over a stretching cylinder featuring variable thermal conductivity,activation energy and second-order slip

Journal of Thermal Analysis and Calorimetry - The significant bioconvection phenomenon with the utilization of nanoparticles encountered fundamental industrial and technological applications in...     

Synthesis and Spectroscopic Study of Some New Phosphoramidates,Crystal Structures of N‐Benzoyl‐N′,N″‐bis(azetidinyl)phosphoric Triamide and N‐Benzoyl‐N′,N″‐bis(hexamethylenyl)phosphoric Triamide

Some new N‐carbonyl, phosphoramidates with formula C₆H₅C(O)N(H)P(O)R₂ (R = NC₃H₆ ( 1 ), NC₆H₁₂ ( 2 ), NHCH₂CH=CH₂ ( 3 ), N(C₃H₇)₂ ( 4 )) and CCl₃C(O)N(H)P(O)R′₂ (R′ = NC₃H₆ ( 5 ), NHCH₂CH=CH₂ ( 6 )) were synthesized and characterized by ¹H, ¹³C, ³¹P NMR and IR spectroscopy and elemental analysis. The structures were determined for compounds 1 and 2 . Compound 1 exists as two crystallographically independent molecules in crystal lattice. Both compounds 1 and 2 produced dimeric aggregates via intermolecular ‐P=O…H‐N‐ hydrogen bonds, which in compound 2 is a centrosymmetric dimer. In compounds with four‐membered ring amine groups, ³J(P,C)>²J(P,C), in agreement with our previous studies about five‐membered ring amine groups. Also, ³J(P,C) values in compounds 1 and 5 are greater than in compounds with five‐, six‐ and seven‐membered ring amine groups.     

Rationalization of the behavior of M2(CH3CS2)4I (M = Ni,Pt) chains at room temperature from periodic density functional theory and ab initio cluster calculations

The electrical conductivities and plausible charge‐ordering states in the room temperature (r.t.) phase for MMX chains [Ni₂(dta)₄I]_∞ and [Pt₂(dta)₄I]_∞ (dta = CH₃CS) have been analyzed with periodic density functional theory (DFT) and correlated ab initio calculations combined with the effective Hamiltonian theory. Periodic DFT calculations show a more delocalized nature of the ground state in [Pt₂(dta)₄I]_∞ compared to [Ni₂(dta)₄I]_∞, which features a rather large energy gap between the occupied and empty bands, and charge polarized dimer units. A larger electrical conductivity for the Pt chain can be expected, especially because the Fermi level lies within a band with contributions from Pt and I orbitals. Electronic structure parameters extracted from ab initio cluster calculations show that the large difference between the observed conductivities at 300 K for Ni and Pt compounds, of 3 orders of magnitude, cannot be explained from the parameters extracted from an embedded M₂(dta)₄I₂ dimer fragment alone. When tetramer fragments are considered, we observe that the interdimer transfer integral (t) between neighboring M₂ units connected by an iodine atom at correlated level is comparable in both chains. On the other hand, the energy to transfer an electron from a dimer to the neighboring one (Coulomb repulsion U) is three times larger in the Ni compound with respect to the Pt chain, in line with the poor conductivity of the former. The electronic structure of the M₄(dta)₈I₃ fragment points to an alternate charge‐polarization state for Ni and an average valence state for Pt when the r.t. X‐ray structure is considered. © 2012 Wiley Periodicals, Inc.     

Cu-based atom transfer radical polymerization of methyl methacrylate using a novel tridentate ligand with mixed donor atoms

This study is aimed at atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) using a novel catalyst. The bis-(2-dodecylsulfanyl-ethyl)-amine (SNS) tridentate ligand with mixed donor atoms was synthesized in high purity using inexpensive reagents and was reacted with copper(I) bromide to produce the CuBr/SNS catalyst. The catalyst mediated living polymerization of MMA yielding polymers with controlled molecular masses and narrow molecular mass distributions (PDI < 1.25). Also, the kinetic plot exhibited a linear increase of ln([M]₀/[M]) versus time, indicating constant concentration of propagating radicals during the polymerization. The products were characterized by ¹H NMR, ¹³C NMR, FT-IR, UV-VIS, GC and elemental analyses (CHNS) and by GPC.     

Selective oxidation of alcohols with H2O2 catalyzed by zinc polyoxometalate immobilized on multi-wall carbon nanotubes modified with ionic liquid

In this work, acid functionalized multi-wall carbon nanotubes (MWCNTs) were modified with imidazolium-based ionic liquids. The selective oxidation of various alcohols with hydrogen peroxide catalyzed by[PZnMo₂W₉O₃₉]^5-, ZnPOM, supported on ionic liquids-modified with MWCNTs, MWCNTAPIB, is reported. This catalyst[ZnPOM@APIB-MWCNT], was characterized by X-ray diffraction, scanning electron microscopy (SEM) and FT-IR spectroscopic methods. This heterogeneous catalyst exhibited high stability and reusability in the oxidation reaction without loss of its catalytic performance.