Automated continuous-flow determinations of serum proteins by pulse polarography

A new flow-through cell is described for application of the dropping mercury electrode to the determination of serum proteins in an automated continuous-flow system. By using differential pulse polarography with short controlled drop times, it is possible to run a rapid automated system at sampling rates of up to 120 per hour with approximately +/- 1% precision and less than 3% carry-over. With the Brdicka reagent, hexa-amminecobalt(III) chloride, various serum proteins can be determined in the range 5-50 mug/ml. The method therefore offers a rapid and sensitive automated procedure for determination of serum proteins.     

Screening of urban aerosol particulate composites for selected metal distribution and their dependence on meteorological parameters

Local atmospheric aerosol particulate samples, collected as composites on daily 6-12 hour basis, at Quaid-i-Azam University campus, Islamabad, Pakistan, using high volume sampling technique, were analysed for Pb, Na, K, Fe, Mn, Cd, Cr, Ni, Zn and Co by FAAS method. The monitoring period ran from October, 2001 through March, 2002, with a total of 105 samples collected on cellulose filters, treated in part with the HNO3-based wet digestion method for metal quantification, and for particle size distribution separately. The metal content of the aerosols was examined in relation to dependence on meteorological parameters, such as temperature, relative humidity, wind speed, sun shine and pan evaporation. Statistical correlation analysis was conducted for multiple metal pairs in aerosols, and the data were examined in relation to meteorological parameters and relevant aerosol particle size fractions. The study revealed no viable strong correlation between the meteorological parameters and metal levels; in general, however, a significant positive correlation was found for temperature. A strong positive correlation was observed for PM<25 and PM2.5-10. For coarse particles (PM10-100 and PM>100), however, a negative correlation was observed. The levels of Na, K, Fe and Zn were found in the range of 1-5 microg/m3 while those for the rest of the metals in the sub microg/m3 range. Principal component analysis and cluster analysis were performed on dataset for source identification and appointment. Largest contribution (33%) was shown by the industrial emissions followed by traffic/road dust (16.7%).     

Sensitive and selective spectrophotometric method for the determination of trace amounts of osmium with 1,2,3-indanetrione monothiosemicarbazone

Summary Sensitive and Selective Spectrophotometric Method for the Determination of Trace Amounts of Osmium with 1,2,3-Indanetrione Monothiosemicarbazone A simple, sensitive and selective spectrophotometric method has been developed for the determination of osmium using 1,2,3-indane-trione monothiosemicarbazone (ITMT). The method is based on the colour reaction between ITMT and osmium(VIII) in hydrochloric acid (0.32–0.60 M) medium. The calibration graph for measurement at 440 nm is linear in the range 1.4–33.6g of osmium per 25ml, with a molar absorptivity of 6.43×10⁴l·mole^–1·cm^–1. The effect of interferences has been studied and the method applied to the determination of osmium in synthetic samples whose composition correspond to osmiridium or syserkite, with good results.     

Phase-transfer-catalyzed free-radical polymerization: Kinetics of polymerization of methyl methacrylate using ammonium peroxydisulfate/hexadecyl pyridinium chloride in ethyl acetate/water

The kinetics of phase-transfer-catalyzed free-radical polymerization of methyl methacrylate using the system ammonium peroxydisulfate/hexadecyl pyridinium chloride have been investigated in the temperature range of 50–60°C in ethyl acetate/water two-phase systems. The superior efficiency of the phase-transfer-catalyzed reaction in comparison with polymerization initiated by oil soluble initiators such as 2,2′-azobisisobutyronitrile and benzoylperoxide has been demonstrated. Rate of polymerization increased with increase in concentration of the quaternary salt but showed a tendency to level off at higher concentrations. Increase in the peroxydisulfate concentration also resulted in an increase in the rate at lower concentrations, but was found to decrease at higher concentrations. The order with respect to the monomer was found to be approximately unity. The title reaction has been found to be not truly phase-transfer catalyzed in character as claimed by previous workers. A suitable kinetic scheme has been proposed to account for the experimental data and its significance discussed.     

Determination of mercury by radiochemical displacement method

A radiochemical displacement method for the determination of micro amounts of Hg(II) has been developed. 65Zn was displaced from the Zn-1-(2-pyridylazo-2-naphthol) complex at pH 5 in borate buffers by Hg (II). 10-80 micrograms of mercury could be determined. Interference of various metal ions and methods for suppression have also been carried out.     

The bis-phenyltin-substituted, lone-pair-containing tungstoarsenate [(C(6)h(5)Sn)(2)as(2)W(19)O(67)(H(2)O)](8)(-)

The bis-phenyltin-substituted, lone-pair-containing tungstoarsenate [(C(6)H(5)Sn)(2)As(2)W(19)O(67)(H(2)O)](8)(-) (1) has been synthesized and characterized by multinuclear NMR, IR, and elemental analysis. Single-crystal X-ray analysis was carried out on (NH(4))(7)Na[(C(6)H(5)Sn)(2)As(2)W(19)O(67)(H(2)O)].17.5H(2)O (NH(4)(-1), which crystallizes in the monoclinic system, space group P2(1)/c, with a = 18.3127(17) A, b = 24.403(2) A, c = 22.965(2) A, beta = 106.223(2) degrees, and Z = 4. Polyanion 1 consists of two B-alpha-(As(III)W(9)O(33)) Keggin moieties linked via a WO(H(2)O) fragment and two SnC(6)H(5) groups leading to a sandwich-type structure with nominal C(2)(v) symmetry. Polyanion 1 is stable in solution as indicated by the expected 6-line pattern (4:4:4:4:2:1) in (183)W NMR and the expected (119)Sn, (13)C, and (1)H NMR spectra. Synthesis of 1 was accomplished by reaction of C(6)H(5)SnCl(3) and K(14)[As(2)W(19)O(67)(H(2)O)] in a 2:1 molar ratio in aqueous acidic medium (pH 2). In the solid-state structure of NH(4)(-1, neighboring polyanions are weakly bound via W-O-Na bonds leading to chains which interact with each other via the phenyl rings resulting in a 2-D assembly.     

Reductive Amination of Aldehydes and Ketones with Sodium Triacetoxyborohydride. Studies on Direct and Indirect Reductive Amination Procedures(1)

Sodium triacetoxyborohydride is presented as a general reducing agent for the reductive amination of aldehydes and ketones. Procedures for using this mild and selective reagent have been developed for a wide variety of substrates. The scope of the reaction includes aliphatic acyclic and cyclic ketones, aliphatic and aromatic aldehydes, and primary and secondary amines including a variety of weakly basic and nonbasic amines. Limitations include reactions with aromatic and unsaturated ketones and some sterically hindered ketones and amines. 1,2-Dichloroethane (DCE) is the preferred reaction solvent, but reactions can also be carried out in tetrahydrofuran (THF) and occasionally in acetonitrile. Acetic acid may be used as catalyst with ketone reactions, but it is generally not needed with aldehydes. The procedure is carried out effectively in the presence of acid sensitive functional groups such as acetals and ketals; it can also be carried out in the presence of reducible functional groups such as C-C multiple bonds and cyano and nitro groups. Reactions are generally faster in DCE than in THF, and in both solvents, reactions are faster in the presence of AcOH. In comparison with other reductive amination procedures such as NaBH(3)CN/MeOH, borane-pyridine, and catalytic hydrogenation, NaBH(OAc)(3) gave consistently higher yields and fewer side products. In the reductive amination of some aldehydes with primary amines where dialkylation is a problem we adopted a stepwise procedure involving imine formation in MeOH followed by reduction with NaBH(4).     

1,3‐Dimethyl‐2‐oxo‐4,6‐diphenyl‐1,2,3,4‐tetrahydropyridine‐3‐carbonitrile

The crystal structure of the title compound, C₂₀H₁₈N₂O, reveals a distorted half‐chair conformation of the central tetra­hydro­pyridine (THP) ring, with the cyano‐ and adjacent phenyl‐substituted C atoms displaced by 0.329 (1) and ?0.315 (1) Å, respectively, from the THP best plane. Steric interactions force the phenyl rings out of the THP plane by 49.21 (9) and 65.76 (5)°. The cyano moiety is coplanar with the THP plane.     

Interaction of nickel with 4-(2'-benzothiazolylazo) salicylic acid (BTAS) and simultaneous first-derivative spectrophotometric determination of nickel(II) and iron(III)

The solution properties of nickel complex with 4-(2'-benzo-thiazolylazo) salicylic acid (BTAS) have been studied by zero-order absorption spectrophotometry in 40% (v/v) ethanol at 20 degrees C and an ionic strength of 0.1 mol dm(-3) (KNO(3)). The equilibria that exist in solution were established and the basic characteristics of complexes formed were determined. A new direct spectrophotometric method for the determination of trace amounts of the nickel is proposed based on the formation of the Ni (BTAS) complex at pH 7.0. The absorption maximum, molar absorbtivity, and Sandell's sensitivity of 1:1 (M:L) complex are 525 nm, 0.6 x 10(4) l mol(-1) cm(-1) and 2.824 x 10(-9) microg cm(-2), respectively. The use of first-derivative spectrophotometry eliminates the interference of iron and enables the simultaneous determination of nickel and iron using BTAS. Quantitative determination of Ni(II) and Fe(III) is possible in the range (0.59-7.08) and (2.1-8.4) microg ml(-1), respectively with a relative standard deviation of 0.5%. The proposed method has been successfully applied to the simultaneous spectrophotometric determination of nickel and iron in steel alloys and aluminum alloys.     

Bifunctional Lewis acid-nucleophile-based asymmetric catalysis: mechanistic evidence for imine activation working in tandem with chiral enolate formation in the synthesis of beta-lactams

We report a mechanistically based study of bifunctional catalyst systems in which chiral nucleophiles work in conjunction with Lewis acids to produce beta-lactams in high chemical yield, diastereoselectivity, and enantioselectivity. Chiral cinchona alkaloid derivatives work best when paired with Lewis acids based on Al(III), Zn(II), Sc(III), and, most notably, In(III). Homogeneous bifunctional catalysts, in which the catalyst contains both Lewis acidic and Lewis basic sites, were also studied in detail. Mechanistic evidence allows us to conclude that the chiral nucleophiles form zwitterionic enolates that react with metal-coordinated imines. Alternative scenarios, which postulated metal-bound enolates, were disfavored on the basis of our observations.