Effect of ion beam irradiation on palladium (II) acetyl acetonate dispersed in polymer matrix

Composites, containing different concentrations of palladium (II) acetylacetonate in polymethyl methacrylate (PMMA) matrix were prepared by vigorous mixing. PMMA was prepared by solution polymerization technique. The composites were irradiated with a 120 MeV Ni¹⁰⁺ beam at two different fluences of 1×10¹¹ and 5×10¹² ions/cm² to study ion-induced effects on their dielectric, structural properties and surface morphology. AC electrical properties of these samples were studied in the frequency range 100 Hz to 10 MHz. The dielectric permittivity/loss shows frequency dependent behavior and it obeys the universal law of dielectric (i.e. ?α f ^n?1) for pristine and irradiated samples at high frequency. The crystalline size and crystallinity of the composites were studied by X-ray diffraction analysis. Decrease in peak intensity after irradiation signifies the amorphization which is also responsible for decrease in T _g as obtained by means of differential scanning calorimetry measurement. Fourier transform infrared spectra also support this result. Surface roughness increases upon irradiation as observed from scanning electron microscopy.     

Synthesis of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> by molten salt technique

Lithium manganese oxide powders have been successfully prepared by a molten salt synthesis using eutectic mixture of LiCl and MnO₂ salt at 900 °C. The synthesis was performed in open atmosphere. The crystalline powders were characterized for their phase identification using X-ray diffraction analysis. The physicochemical properties of the lithium manganese oxide powders are investigated by thermal analysis (thermo gravimetric analysis/ differential thermal analysis), Fourier transform infrared spectroscopy, Raman spectroscopy, atomic absorption spectroscopy, electron spin resonance spectroscopy, and scanning electron microscopy. This work shows the feasibility for obtaining lithium manganese oxide at low-temperature molten salt flux method.     

Influence of tungsten doping concentration on the electronic and optical properties of anatase TiO2

The structural, electronic and optical properties of tungsten-doped TiO₂ have been investigated using density functional theory with plane wave basis sets and ultrasoft pseuodopotential. Substitutional W doping at Ti sites create W 5d states just below the conduction band minimum while interstitial W doping gives isolated W 5d states in the middle of forbidden region. Averaged bond lengths show that W doping at Ti sites produce minimum structural distortion as compared to the interstitial W-doped TiO₂. Substitutional W-doped TiO₂ has better visible light absorption compared to interstitial W-doped TiO₂ and has stable configuration which provide reasonable explanation for the experimental findings. Tungsten doping in TiO₂ with different doping concentrations is investigated as an enabling concept for enhancing the visible light absorption. Optical properties show that optimal W doping concentration would improve the visible light absorption. 2.08% W doping concentration gives strong visible and ultraviolet light absorption among all doped models found consistent with experiments.     

Anisotropic electrical properties of Bi0.5(Na0.75K0.25)0.5TiO3 ceramics fabricated by reactive templated grain growth (RTGG)

We have fabricated lead-free Bi_0.5(Na_0.75K_0.25)_0.5TiO₃ (BNKT) ceramics by a conventional process (CP) and reactive templated grain growth (RTGG) methods. The effect of grain orientation on structure, dielectric, complex impedance and electrical properties was investigated. The phase formation and grain morphology of BNKT ceramics were examined by X-ray diffraction (XRD) and scanning electron microscope (SEM), respectively. High dielectric constant and low dielectric loss was observed for grain oriented (textured) BNKT ceramics. Complex impedance, temperature dependent ac and dc conductivity were performed to explore the conduction behavior of the prepared BNKT ceramics.     

Observation of chimera patterns in a network of symmetric chaotic finance systems

The economic and financial systems consist of many nonlinear factors that make them behave as the complex systems. Recently many chaotic finance systems have been proposed to study the complex dynamics of finance as a noticeable problem in economics. In fact, the intricate structure between financial institutions can be obtained by using a network of financial systems. Therefore, in this paper, we consider a ring network of coupled symmetric chaotic finance systems, and investigate its behavior by varying the coupling parameters. The results show that the coupling strength and range have significant effects on the behavior of the coupled systems, and various patterns such as the chimera and multi-chimera states are observed. Furthermore, changing the parameters' values, remarkably influences on the oscillators attractors. When several synchronous clusters are formed, the attractors of the synchronized oscillators are symmetric, but different from the single oscillator attractor.     

Langmuir probe and spectroscopic studies of RF generated helium-nitrogen mixture plasma

This paper reports the effect of helium percentage variation in a capacitive RF helium-nitrogen mixture plasma on various plasma parameters and concentration of nitrogen active species (N₂(C³Π _u) and N₂ ⁺(B²Σ _u ⁺)). Langmuir probe is used for determination of electron energy distribution functions, effective electron temperature, plasma potential and electron density. Optical emission spectroscopy is used for determination of electron temperature from Boltzmann's plot of He–I lines and the relative changes in the concentration of active species by measuring the emission intensities of nitrogen (0-0) bands of the second positive and the first negative systems. The results demonstrate that electron temperature, electron density and concentration of active species increase significantly with increase in helium percentage in the mixture and RF power.     

Measurement of total angular momentum values of high-lying even-parity atomic states of samarium by spectrally resolved laser-induced fluorescence technique

Spectrally resolved laser-induced fluorescence technique was used to uniquely assign total angular momentum (J) values to high-lying even-parity energy levels of atomic samarium. Unique J value assignment was done for seven energy levels in the energy region 34,800–36,200 cm⁻¹, recently observed and reported in the literature.