Low noise double pass L-band erbium-doped fiber amplifier

A new double pass long wavelength band erbium-doped fiber amplifier with enhanced noise figure characteristics is demonstrated. The noise figure is improved by about 2.6 dB with the incorporation of broadband conventional-band fiber Bragg grating (FBG) in between the two segments of erbium-doped fiber. By incorporating both the pre-amplifier and the FBG, the noise figure is further improved, which varies from 4.0 to 5.0 dB in the flat gain region from 1570 to 1600 nm. The gain varies from 32.0 to 33.4 dB within this region. The new amplifier with high gain and low noise figure can be useful as an inline amplifier in a wavelength division multiplexing transmission system.     

Interaction of Point Defects with Twin Boundaries in Copper

The interaction between small vacancy clusters and twin boundaries in copper is studied by using many-body potential developed by Ackland et aL for fcc metals. The interaction energies of single-, di- and tri-vacancy clusters with （111） and （112） twin boundaries are computed using well established simulation techniques. For （111） twins the vacancy clusters are highly repelled when they are on the adjacent planes, and are attracted when they are away from the boundary. In the case of （112） twins, vacancy clusters are more attracted to the boundary when they are near the boundary as compared to away from it. Vacancy clusters on both the sides of the boundary are also investigated, and it is observed that the clusters energetically prefer to lie on the off-mirror sites as compared to the mirror position across the twin.     

Performance improvement of spectral amplitude coding-optical code division multiple access systems using NAND detection with enhanced double weight code

The bit-error rate (BER) performance of the spectral amplitude coding-optical code division multiple access (SACOCDMA) system has been investigated by using NAND subtraction detection technique with enhanced double weight (EDW) code. The EDW code is the enhanced version of double weight (DW) code family where the code weight is any odd number and greater than one with ideal cross-correlation. In order to evaluate the performance of the system, we used mathematical analysis extensively along with the simulation experiment. The evaluation results obtained using the NAND subtraction detection technique was compared with those obtained using the complementary detection technique for the same number of active users. The comparison results revealed that the BER performance of the system using NAND subtraction detection technique has greatly been improved as compared to the complementary technique.     

Lack of anomalous diffusion in linear translationally-invariant systems determined by only one initial condition

It is shown that as far as the linear diffusion equation meets both time- and space-translational invariance, the time dependence of a moment of degree α is a polynomial of degree at most equal to α, while all connected moments are at most linear functions of time. As a special case, the variance is an at most linear function of time.     

Image sharing scheme based on combination theory

We present a simple algorithm for sharing and hiding secret image based on combination theory. The secret image is firstly encrypted by matrix multiplications and then shared into many shadow images by multiplying binary random sampling matrices. The sampling matrices randomly assign the pixel values to the shadow images which satisfy a specific combination rule as a constrain, so that the (t, n) threshold secret sharing scheme can be implemented. Numerical experiments have demonstrated the effectiveness of this image sharing algorithm.     

Synthesis, structural and magnetic properties of the nanocomposite Fe63B23Nd7Y3Nb3Cr1 magnets

The Fe₆₃B₂₃Nd₇Y₃Nb₃Cr₁ nanocomposite magnets in the form of sheets have been prepared by copper mold casting technique. The phase evolution, crystal structure, microstructural and magnetic properties have been investigated in the as-cast and annealed states. The as-cast sheets show magnetically soft behaviors which become magnetically hard by thermal annealing. The optimal annealed microstructure was composed of nanosize soft magnetic α-Fe (19-29 nm) and hard magnetic Nd₂Fe₁₄B (45-55 nm) grains. The best hard magnetic properties such as intrinsic coercivity, _jH_c of 1119 kA/m, remanence, B_r of 0.44 T, magnetic induction to saturation magnetization ratio, M_r/M_s=0.61 and maximum energy product, (BH)_max of 55 kJ/m³ was obtained after annealing at 680 °C for 15 min. The annealing treatment above 680 °C results in non-ideal phase grains growth, which degrade the magnetic properties.     

Nonclassical Symmetries for Nonlinear Partial Differential Equations via Compatibility

The determining equations for the nonclassical symmetry reductions of nonlinear partial differential equations with arbitrary order can be obtained by requiring the compatibility between the original equations and the invariant surface conditions. The (2+1)-dimensional shallow water wave equation,
Boussinesq equation, and the dispersive wave equations in shallow water serve as examples illustrating how compatibility leads quickly and easily to the determining equations for their nonclassical symmetries.     

On the accuracy of bore reconstruction from input impedance measurements: application to bassoon crook measurements

The determination of a pipe bore from the measured reflection function is a technique that has reached a certain maturity. However, the measurement of the reflection function in the time domain (pulse reflectometry) requires equipment that is rather difficult to operate. On the other hand, the techniques for measuring the input impedance have reached an unquestionable maturity with respect to measurement setup and to calibration. It is thus likely that impedance measurements might be able to give the same information. By doing simulations, it is first shown that the reflection function deduced from the input impedance gives access to the bore with a precision comparable with that obtained with pulse reflectometry. It is then shown that the accuracy obtained with measurements is of the same order as that obtained from simulations. The technique is then used for the dimensional inspection of bassoon crooks.     

Preparation and properties of semiconductor CuO nanoparticles via a simple precipitation method at different reaction temperatures

Preparation and properties of CuO nanoparticles as an important p-type semiconductor via a simple precipitation method at different reaction temperatures varying from 10 to 115°C using copper acetate as a starting material have been reported. In addition, we investigated the influence of the ultrasonic irradiation through synthesizing the nanosized CuO at 60°C. Samples were characterized by XRD, FT-IR, SEM, TEM and UV-Vis techniques. XRD patterns of samples were identical to the single-phase pure CuO with a monoclinic structure. FT-IR spectra exhibited sharp peaks at around 519 and 598?cm^?1 which can be assigned to vibrations of the Cu-O bond. Results indicated that properties of samples had great dependence on the temperature and ultrasonic irradiation. The crystallite size and crystallization increased with increasing the temperature from 10 to 115°C. The band gap of samples was estimated to be in the range of 1.9–2.9?eV that is larger than the reported value for the bulk CuO (1.85?eV). This study provides a simple method for the preparation of nanosized CuO with a better surface uniformity and a narrow size distribution. Synthesized CuO samples with adjustable and controllable optical properties make the applicability of copper oxide even more versatile.