Highly efficient oxidation of 2-imidazoline-5-carboxylic derivatives to imidazole-5-carboxylic derivatives by dioxygen

A highly efficient and environmental-benign oxidation by dioxygen (or air) as the sole oxidant was first applied for the conversion of 2-imidazoline-5-carboxylic derivatives to imidazole-5-carboxylic derivatives in very good and excellent yields. The substituent effect on 2-imidazoline ring was investigated. This protocol was also suitable for the synthesis of 2-imidazoles in relatively large scale.     

尘埃粒子计数器中光源对传感器光通量的影响分析

在Mie散射理论基础上，由单分散射的光强表达式导出在偏振光的入射条件下一定立体角内的散射光通量的表达式，并与自然光入射作比较。计算了在相同强度不同光源入射下，尘埃粒子计数器的两种常用散射光收集系统收集的散射光通量。结果表明：采用近前向散射光收集系统得到的光通量相等；而采用直角方向散射光收集系统时两者并不相等，且在平面偏振光入射时，收集的散射光通量还跟探测器中心与入射光偏振方向夹角有关。用MATLAB编程计算，得出了在探测器中心与偏振方向的夹角成90°或270°位置时，收集的散射光通量有极值的结论，为激光尘埃计数器传感器光学设计提供了依据。     

基于回波平移序列的快速三维磁共振温度成像方法

高强度聚焦超声（HIFU）是一种无创的热消融疗法，为保证其安全性和有效性，需要一种精度高、速度快的测温方法在其治疗过程中对温度进行监控.基于质子共振频率位移（PRFS）的磁共振温度成像（MRT）对温度具有较高的灵敏度，且与温度具有良好的线性关系，因此常被用于引导HIFU治疗.然而在实际应用中，HIFU治疗的最大隐患在于可能造成表皮灼伤，并且灼伤区域可能与焦点区域相隔较远.因此MRT的监控范围十分重要.本文基于三维回波平移成像序列，结合可控混叠的空间并行成像技术，实现了时间分辨率为3 s的快速三维温度成像.为了验证该方法的精度，本文首先设计了仿体降温实验，利用光纤温度计验证回波平移序列测温的准确度和精确度.然后在室温条件下扫描离体猪肉组织，对比加速前后的MRT的测温精确度.在HIFU加热条件下扫描离体猪肉组织，对比加速前后的MRT的测温准确度.结果显示，本文提出的方法可以在3 s内完成三维温度精准测量，对于HIFU治疗的安全监控具有重要意义.     

In situ self-assembly synthesis of gold nanoparticle arrays on polystyrene microspheres and their surface plasmon resonance

Gold (Au) nanoparticle arrays with tunable morphology and optical characteristics were synthesized by in-situ self-assembly process that occurred on the surface of aniline-modified polystyrene (PS) microspheres. The method can be used to control the growth of both single and aggregated Au nanoparticle arrays on PS microsphere surface. This method could also be adapted for synthesis of other noble metals hybrid materials, which opens exciting opportunities for their practical applications.     

变系数拟自回归模型下的测量误差分析

本文对雷达测量误差影响较大的因素进行了分析研究,并将其和雷达测量数据一起建立了变系数拟自回归的统计模型以实现对雷达测量值的纠偏,利用剖面最小二乘法估计模型参数,在一定条件下证明了模型的大样本性质,并结合残差的峰度和偏度构建了区间估计。实际数据的拟合和预测结果显示,我们提出的纠偏方法可将误差减少90%。     

Electrospinning synthesis and photocatalytic property of CaFe2O4/MgFe2O4 heterostructure for degradation of tetracycline

CaFe₂O₄/MgFe₂O₄ nanowires with heterostructure had been successfully synthesized by electrospinning method. The obtained samples were systematically characterized by scanning electron microscopy (SEM), X‐Ray diffraction (XRD), UV–Vis diffuse reflectance spectra (UV‐Vis DR) and Environment scanning electron microscopy (ESEM). The novel CaFe₂O₄/MgFe₂O₄ nanowires exhibit an enhanced photocatalytic activity for degrading of tetracycline (TC) under visible light. Compared with bare CaFe₂O₄ or MgFe₂O₄ samples, the prepared CaFe₂O₄/MgFe₂O₄ (Ca:Mg:Fe = 3:2:10) composited nanowires show the best photocatalytic performance with a degradation efficiency of 40% after 150 min reaction time. This enhancement is attributed to the heterostructure of CaFe₂O₄/MgFe₂O₄ nanowires, which effectively repress the recombination of photo‐generated electrons and holes. Based on heterostructure and energy band positions, the enhancement of mechanism under visible‐light enhances the photocatalytic activity.     

Influence of mechanical stress on the molar mass distribution and the rheological behavior of polysaccharides

The mechanical stress acting on hydrocolloid macromolecules in flow processes may change the molecular structure, the rheological properties, affecting the technical function and thereby the properties. This paper introduces a newly developed method for definite “mechanical stress treatment” of xanthan and guar gum. Rheological measurements (intrinsic viscosity) and chromatography (GPC) allowed the resulting rheological and structural changes to be quantified.     

应力波和动光弹等差条纹的分析与判读

介绍了动光弹的基本原理，并从理论上回答了动光弹应用中的一些问题，如惯性力可否忽略等．并在总结回顾动光弹等差条纹级次判读方法的基础上，提出了把应力波理论与等差条纹分析判读相结合的方法，这样不仅使条纹判读的概念更清晰，而且可提高条纹分析和级次判读的准确性．     

热熔还原法制备超硬复合相氮化碳及其工艺探索

本文采用热熔还原法,以聚氯乙烯、氯化铵、氧化铁为原料制备复合超硬相氮化碳(α/β-C3 N4).采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)以及透射电子显微镜(TEM)对样品进行表征.在此基础上分析了不同温度和原料配比下合成复合相C3 N4的物相组成及形貌变化.结果表明样品形貌随着原料配比的不同在颗粒、棒状、纳米线之间转变.当C、N和Fe之间摩尔比为3:4:0.4时,所制备出的样品呈纳米线状,纳米线的直径约为15 nm,结晶性良好.而在其它配比下,只能获得棒状或颗粒状α/β复合相C3 N4.     

微分中值定理与Newton-Leibniz公式可互相证明

首先用微分中值定理推出了Newton-Leibniz公式,同时也用Newton-Leibniz公式推出了三个微分中值定理,从而证明了微分中值定理与Newton-Leibniz公式可互相证明.