有机掺杂溶胶-凝胶法制备pH敏感膜及其光谱响应的研究

使用四甲氧基硅烷（TMOS）和二甲基二甲氧基硅烷（DiMe-DMOS)为共先驱体，采用溶胶－凝胶的有机掺杂，制备对pH具有宽程响应的敏感膜。详细考察了包埋溴酚蓝和溴酚绿的敏感膜对pH的响应值、响应时间、泄漏和可逆性等响应性能指标，并进行了溴酚蓝和溴酚绿在水相与膜内吸收光谱的研究。     

基于正交小波包的茶叶近红外光谱特性分析

针对茶叶近红外光谱数据中存在着高度的共线性和高维数,根据小波包变换具有的去相关能力。通过引入保留能量和置零系数来定量描述茶叶近红外光谱小波包变换后的特性;分析与实验表明,正交小波包对近红外光谱具有较强的压缩能力,压缩后保留的能量为99．98％,而置零系数百分比高达95．87％;这一结果对近红外光谱图的存储、检索及快速处理都有着十分重要的意义。     

Radiation characteristics and implosion dynamics of tungsten wire array Z-pinches on the YANG accelerator

We investigated the radiation characteristics and implosion dynamics of low-wire-number cylindrical tungsten wire array Z-pinches on the YANG accelerator with a peak current 0.8-1.1 MA and a rising time ～ 90 ns.The arrays are made up of(8-32)×5 μm wires 6/10 mm in diameter and 15 mm in height.The highest X-ray power obtained in the experiments was about 0.37 TW with the total radiation energy ～ 13 kJ and the energy conversion efficiency ～ 9%(24×5 μm wires,6 mm in diameter).Most of the X-ray emissions from tungsten Z-pinch plasmas were distributed in the spectral band of 100-600 eV,peaked at 250 and 375 eV.The dominant wavelengths of the wire ablation and the magneto-Rayleigh-Taylor instability were found and analyzed through measuring the time-gated self-emission and laser interferometric images.Through analyzing the implosion trajectories obtained by an optical streak camera,the run-in velocities of the Z-pinch plasmas at the end of the implosion phase were determined to be about(1.3-2.1)×10 7 cm/s.     

气侵期间环空气液两相流动研究

本文建立了描述钻井气侵期间井眼气液两相流偏微分方程组,该方程组既考虑了不同渗透率的储层与储层钻开不同厚度下的气体侵入井眼情况,也给出了这种情况下该偏微分方程组的求解方法。利用实验数据进行了模拟,揭示了环空气液两相流型与流动参数变化特征,据此,能够为安全有效地井控提供理论基础。     

基于J-TEXT 装置的光耦合隔离放大器设计与分析

基于反馈技术设计了一款带宽2.7MHz、高线性度、低传输延时的光耦合隔离放大器,仿真分析了 I-V 转换电路补偿电容对电路频率特性的影响,并选择了合适的电路参数。将部分寄生参数考虑在内,建立了电路数学模型,仿真、测试与理论分析相结合研究了电路的线性度与频率特性。基于J-TEXT 装置静电探针悬浮电位测量系统验证了电路在系统中的可用性。     

稳态装置中的尘埃等离子体状态

介绍了用于研究尘埃等离子体中波的直流放电的尘埃等离子体装置,该装置能产生长约３０ｃｍ,直径约８．４ｃｍ的尘埃等离子体柱。在等离了体中加入尘埃后,朗缪尔探针的饱和电流明显降低。尘埃所带负电量与电机转速成正比,可达到等离子体负电量的４０％。     

光/电激发方式对AlGaInP及GaN基LED电学特性的影响

采用光激励与电激励的方式对AlGaInP与InGaN/GaN基LED的电学特性进行了表征,并重点比较分析了两种激励方式的下理想因子这一重要参数的差异.探讨了影响LED理想因子的因素,确定理想因子的适宜注入强度范围.研究结果表明:结温与注入强度是影响LED理想因子的重要因素;对于特定类型的发光二极管,空间电荷区起主导作用...     

Bonding Interface Imaging and Shear Strength Prediction by Ultrasound

The propagation of a longitudinal ultrasonic wave normally incident upon an adhesively bonded structure is studied. The structure consists of adherend and adhesive layers with finite thickness. Interfaces between adherend and adhesive are regarded as distributed springs. Theoretical and experimental results show that resonant frequencies of the bonded structure vary sensitively with the interface stiffness constants and adhesive thickness, and these interface characteristics are inversed by the simulation annealing (SA) method. Furthermore, the distribution image of interface stiffnesses is compared with the state of fracture interface, and quantitative prediction of shear strength is achieved based on the distribution of interface stiffnesses and adhesive thicknesses by using a back-propagation neutral network. The average relative error of the shear strength from prediction to real value is 10.7%.     

Adiabatic Passage Based on the Calcium Active Optical Clock

We propose a new application of the optical adiabatic passage effect for the excitation of a thermal atomic beam, which will be used in the calcium active optical clock to produce population inversion. A comparison between the optical adiabatic passage effect and the Rabi π pulse is investigated, 99% of the calcium atoms in the atomic beam that has a wide velocity distribution will be excited to the upper state for population inversion using the adiabatic passage, while 76% at most will be excited to the excited state using the π pulse with suitable parameters.     

汽车尾气颗粒物的STXM和NEXAFS研究

为了研究汽车尾气颗粒物的结构和氮的种态,使用扫描透射X射线显微成像(STXM)技术研究了桑塔纳3000和高尔汽车尾气颗粒物.STXM表明单颗粒物的粒径为500nm,颗粒物质量分布不均匀,有中间空洞.比较汽车尾气颗粒物和(NH4)2SO4和NaNO3中N的1sX射线近边吸收精细结构谱(NEXAFS),铵盐在406eV有显著的σ*吸收峰,有肩部结构;汽车尾气颗粒物和NaNO3中N的近边吸收谱在412eV和418.5eV有明显的σ吸收峰;(NH4)2SO4中N的近边吸收谱在413.5eV和421.8eV更宽的σ吸收峰.硝酸盐是汽车尾气颗粒物中的N化学种态的主要存在形式.在395—418eV能量范围内对桑塔纳3000汽车尾气颗粒物进行堆栈扫描,经过主成分分析和聚类分析,发现其表层主要为硝酸盐,内部有少量铵盐.