HL-2M常规偏滤器位形抽气对碳杂质分布影响的模拟分析

在小角度V型结构的HL-2M常规偏滤器位形下,采用SOLPS 5.0程序研究了抽气速率Sp对装置粒子排除控制能力及溅射产生的碳杂质分布的影响.模拟结果表明,当进入边缘区域的能量为4MW、上游密度为n sep=3.0×10 m-3时,过高的抽气速率(大于40m3?s-1)将迅速降低靶板附近中性粒子压强和等离子体密度,并引...     

考虑时滞效应与均值-方差效用的非零和投资与再保险博弈

在考虑时滞效应的影响下研究了非零和随机微分投资与再保险博弈问题.以最大化终端绝对财富和相对财富的均值-方差效用为目标,构建了两个相互竞争的保险公司之间的非零和投资与再保险博弈模型,分别在经典风险模型和近似扩散风险模型下探讨了博弈的Nash均衡策略.借助随机控制理论以及相应的广义Hamilton-Jacobi-Bellm...     

The Biological Fate of Pharmaceutical Excipient β-Cyclodextrin: Pharmacokinetics,Tissue Distribution,Excretion, and Metabolism of β-Cyclodextrin in Rats

β-cyclodextrin has a unique annular hollow ultrastructure that allows encapsulation of various poorly water-soluble drugs in the resulting cavity, thereby increasing drug stability. As a bioactive molecule, the metabolism of β-cyclodextrin is mainly completed by the flora in the colon, which can interact with API. In this study, understanding the in vivo fate of β-cyclodextrin, a LC-MS/MS method was developed to facilitate simultaneous quantitative analysis of pharmaceutical excipient β-cyclodextrin and API dextromethorphan hydrobromide. The established method had been effectively used to study the pharmacokinetics, tissue distribution, excretion, and metabolism of β-cyclodextrin after oral administration in rats. Results showed that β-cyclodextrin was almost wholly removed from rat plasma within 36 h, and high concentrations of β-cyclodextrin distributed hastily to organs with increased blood flow velocities such as the spleen, liver, and kidney after administration. The excretion of intact β-cyclodextrin to urine and feces was lower than the administration dose. It can be speculated that β-cyclodextrin metabolized to maltodextrin, which was further metabolized, absorbed, and eventually discharged in the form of CO₂ and H₂O. Results proved that β-cyclodextrin, with relative low accumulation in the body, had good safety. The results will assist further study of the design and safety evaluation of adjuvant β-cyclodextrin and promote its clinical development.     

Development of Optogenetic Dual-Switch System for Rewiring Metabolic Flux for Polyhydroxybutyrate Production

Several strategies, including inducer addition and biosensor use, have been developed for dynamical regulation. However, the toxicity, cost, and inflexibility of existing strategies have created a demand for superior technology. In this study, we designed an optogenetic dual-switch system and applied it to increase polyhydroxybutyrate (PHB) production. First, an optimized chromatic acclimation sensor/regulator (RBS10–CcaS#10–CcaR) system (comprising an optimized ribosomal binding site (RBS), light sensory protein CcaS, and response regulator CcaR) was selected for a wide sensing range of approximately 10-fold between green-light activation and red-light repression. The RBS10–CcaS#10–CcaR system was combined with a blue light-activated YF1–FixJ–PhlF system (containing histidine kinase YF1, response regulator FixJ, and repressor PhlF) engineered with reduced crosstalk. Finally, the optogenetic dual-switch system was used to rewire the metabolic flux for PHB production by regulating the sequences and intervals of the citrate synthase gene (gltA) and PHB synthesis gene (phbCAB) expression. Consequently, the strain RBS34, which has high gltA expression and a time lag of 3 h, achieved the highest PHB content of 16.6 wt%, which was approximately 3-fold that of F34 (expressed at 0 h). The results indicate that the optogenetic dual-switch system was verified as a practical and convenient tool for increasing PHB production.     

Mo/MCM-22分子筛碳化钼活性中心结构及甲烷活化机理的密度泛函理论研究

 应用密度泛函理论研究了Mo/MCM-22分子筛上碳化钼活性中心的几何结构和电子结构,以及甲烷在该活性中心上的活化机理. 设计了两种结构的活性中心模型: Mo(CH2)2(模型A)和Mo(CH)CH2(模型B); 它们都嫁接在MCM-22分子筛超笼边缘的T4位的Brnsted-酸性位上,用3T簇模型代替分子筛的骨架,对所设计的模型进行了几何结构优化和电子结构分析. 结构优化结果显示, Mo与CH2端基以双键结合,键长为0.18～0.19 nm, 而Mo与CH端基以叁键结合,键长为0.17 nm. 通过自然键轨道分析,证明中心钼原子以配位键与骨架氧原子结合. 根据前线分子轨道的分析,预测了甲烷活化反应将发生在甲烷分子的HOMO和钼活性中心的LUMO之间,即 C-H 键的电子流向 Mo-C 键的π*轨道. 甲烷 C-H 键发生异裂, H+和H3C-基团分别与 Mo-C 键上的Mo和C成键. 在模型A上,甲烷活化反应的活化能为119.97 kJ/mol; 在模型B上,甲烷的H原子可以分别结合到CH2端基和CH端基上,对应的活化能分别为91.37和79.07 kJ/mol.     

湿式氧化工艺中颗粒Ru催化剂的活性和稳定性

分别采用传统成型法和新的成型法制备了一系列以CeO2为主要成分的载体,将贵金属Ru浸渍在这些载体上制备了不同的催化剂.对催化剂的比表面积和机械强度进行了表征,并通过湿式氧化乙酸的静态实验和湿式氧化苯酚的动态实验分别考察了催化剂的活性和稳定性.结果表明,Ru负载在采用新方法成型的载体上制得的催化剂具有更大的比表面积.向CeO2中掺杂Zr能增大载体的比表面积.新方法制备的催化剂Ru/ZrO2-CeO2催化湿式氧化乙酸具有良好的活性,化学需氧量(COD)去除率为98%.在110h的催化湿式氧化苯酚反应中,苯酚和COD的去除率维持在96%左右,反应过程中活性组分的溶出浓度很小,催化剂表面有少量的积炭,但积炭在300℃能够被完全氧化.因而催化剂具有较好的稳定性和工业应用可能性.     

p型G aSb窗口层在热光伏电池中的应用研究

为了提高GaSb热光伏电池的转换效率,在电池结构中引入p+-GaSb窗口层,研究了生长基底、衬底温度和反应物源温度对p+-GaSb薄膜性能的影响,并优化了电池结构中p+-GaSb窗口层的厚度和掺杂浓度.实验结果表明,生长基底和温度等制备参数影响着p+-GaSb薄膜的结构特性和电学特性,而且,较薄的高掺杂p+-GaSb层有利于提高电池性能.通过测试和仿真,热光伏电池的转换效率达到9.49;(AM1.5测试)和20.34;(AFORS-HET仿真).     

相位可控的核四极矩共振激励脉冲发生器设计

在核四极矩共振（NQR）领域,射频激励脉冲信号的优劣对NQR响应信号有重要影响.针对常规方法中射频激励脉冲参数不可控的问题,本文基于32位闪存微型控制器STM32和直接数字频率合成（DDS）芯片AD9910设计了一种相位可控激励脉冲发生器.采用STM32控制AD9910产生波形参数（脉冲宽度、脉冲间隔、脉冲个数和共振频率等）可控的射频激励脉冲,利用LabVIEW软件平台设计脉冲参数设置界面,并建立计算机与微控制器通信,实现波形参数的精确优化控制.实验结果表明,该方法实现了相位可控的NQR激励脉冲序列,可为后续NQR信号检测提供有效激励源.     

Adaptive neural network consensus tracking control for uncertain multi-agent systems with predefined accuracy

Nonlinear Dynamics - This paper proposes the consensus tracking control problem for a class of uncertain nonlinear multi-agent systems. By using a group of nonnegative functions, an adaptive neural...     

基于塑性铰理论的车身概念设计正碰分析与优化方法

在概念设计阶段,车身碰撞安全性能评价是一个难点问题,需要详细的结构模型,本文基于塑性铰理论提出采用梁单元简化模型对框架车身进行概念设计阶段的耐撞性评估和优化设计方法。首先,介绍了关于箱型截面薄壁梁弯曲特性研究的理论模型与计算过程,接着赋予梁单元塑性铰的特性,模拟薄壁梁变形,再对框架车身进行了碰撞仿真。将仿真结果与详细模型对比,以分析简化模型的精度及可靠性。最后,以此为基础对框架车身进行耐撞性优化。结果表明,该简化模型易于创建,且有较高的精度,可用于概念设计阶段梁结构的设计工作。