空间有理参数多项式曲线的整数级绘制算法

讨论了空间有理曲线中心投影后导数上界的估计，基于曲线各阶差分的递推计算，给出了空间有理参数多项式曲线的快速绘制算法．算法只用到整数的加减法，效率高．     

有理逼近的一些最新进展

作为非线性逼近的一个重要特殊情形，有理函数逼近（即有理逼近）无论在实践中还是在应用中有都有重要的意义，有理逼近日益成为逼近论的一个重要和具有很强生命力的课题。近年来，在这一方面的研究成果不断涌现，其中许多都是非常有意义的。本文将对此作一个总结，特别对其中涉及我们自己的工作作一个回顾。     

耦合时间精度对模拟飞行器自由运动特性的影响

将亚迭代技术引入流体动力学和刚体动力学方程的耦合求解,获得细长三角翼极限环运动的规律.探讨耦合时间精度对飞行器非定常运动特性的影响,细长三角冀的大迎角自由滚运动最终形成极限环振荡的周期性自维持运动,不同攻角自由滚振幅阶跃式的变化特点较好地吻合了自由滚试验的规律.对于多系统耦合问题,亚迭代耦合求解(耦合时间精度为二阶)对物理时间步长的依赖性不明显;而存在一阶时间滞后的解耦推进方法的数值结果强烈地依赖于物理时间步长选取,稍大的时间步长将导致非物理的数值结果.     

碲基掺铒光纤放大器对于渐变输入信号的瞬态响应

为了抑制输出信号功率的瞬态波动,提出了调理脉冲信号边沿变化方式的思想.通过有限差分法数值模拟四能级模型下的粒子数速率-光功率传输方程组,理论研究了宽带碲基掺铒光纤放大器(Erbium-doped Tellurite-based Fiber Amplifier,EDTFA)对于低频脉冲输入信号的瞬态响应.研究表明,相比具有阶跃上升沿的方波脉冲,选择一个合适的渐变上升沿脉冲信号可以有效地抑制EDTFA输出端信号功率的瞬时上冲幅度.在多信道系统中,选择渐变的信道功率上传和下载方式,可以延缓其余信道输出功率的瞬态响应速度,从而为后续增益箍制技术的实施提供了便利.     

Photon-Assisted Conductance Structure for a Quantum Dot

We investigate theoretically the electron transport of a two-level quantum dot irradiated under a weak laser field at low temperatures in the rotating wave approximation. Using the method of the Keldysh equation of motion for nonequilibrium Green function, we examine the conductance for the system with photon polarization perpendicular to the tunnelling current direction. It is demonstrated that by analytic analysing and numerical examples, a feature of conductance peak splitting appears, and the dependence of conductance on the incident laser frequency and self-energy are discussed.     

磁控溅射法制备的CaCu3Ti4O12薄膜

采用溅射方法成功地制备了CaCu3Ti4O12薄膜,用原子力显微镜、x射线衍射(XRD)仪和LCR分析仪对样品进行形貌、物相结构和介电性质的研究.XRD表明,薄膜比块体的晶格常数小但晶格畸变较大;LCR测量结果显示,在相同温度下薄膜比块体的相对介电常数低,薄膜相对介电常数由低到高转变时对应的温度较高且激活能较大.分析表明:薄膜的相对介电常数较低是样品中晶相含量较低、缺陷较多使内部阻挡层电容大量减小、致密度不高引起的;薄膜中激活能的增大由膜和基底间晶格的不匹配造成膜中的内应力增大、微结构、缺陷和畴等因素决定;介电常数在低频时的急剧增大,意味着存在界面极化,它与界面的缺陷、悬挂键有关.     

CSRm束流径向和轴向振荡的耦合

介绍了由于磁铁的安装误差和螺线管的存在而造成的束流径向和轴向的耦合，以及耦合对束流稳定的影响。结合CSRm结构的典型参数分析得出:二极磁铁和四极磁铁在纵向角安装偏差为-0.5~0.5 mrad；有螺线管存在的情况下，工作点落在和共振线时，将导致束流不稳定而大量损失，落在差共振线时，束流稳定。通过模拟计算发现:螺线管产生的耦合远大于磁铁的纵向角安装偏差产生的耦合。     

Attenuation correction for dedicated breast PET using only emission data based on consistency conditions

Accurate attenuation correction is required in dedicated breast PET imaging systems for image artifact removal and quantitative studies. In this study, a method using only emission data based on consistency conditions is proposed for attenuation correction in breast PET imaging systems. The consistency conditions are exploited to evaluate the accuracy of the estimated attenuation distribution and find the appropriate parameters that yield the most consistent attenuation distribution with the measured emission data. We have proved the validity of the method with experimental investigations and single-patient studies using a dedicated breast PET. The results show that the method is capable of accurately estimating the attenuation distribution of a uniform attenuator from the experimental data with various relatively low activities. The results also show that in single-patient studies, the method is robust for the irregular boundary of breast tissue and provides a distinct improvement in image quality.     

Local hydrated structure of an Fe2+/Fe3+ aqueous solution: an investigation using a combination of molecular dynamics and X-ray absorption fine structure methods

The hydrated shell of both Fe2+ and Fe3+ aqueous solutions are investigated by using the molecular dynamics (MD) and X-ray absorption structure (XAS) methods. The MD simulations show that the first hydrated shells of both Fe2+ and Fe3+ are characterized by a regular octahedron with an Fe-O distance of 2.08 for Fe2+ and 1.96 for Fe3+, and rule out the occurrence of a Jahn-Teller distortion in the hydrated shell of an Fe2+ aqueous solution. The corresponding X-ray absorption near edge fine structure (XANES) calculation successfully reproduces all features in the XANES spectra in Fe2+ and Fe3+ aqueous solution. A feature that is located at energy 1 eV higher than the white line (WL) in an Fe3+ aqueous solution may be assigned to the contribution of the charge transfer.     

基于Bitaper-LPFG-Bitaper结构的全光纤Mach-Zehnder干涉仪的温度传感特性

提出并制作出一种基于锥体光纤-长周期光纤光栅-锥体光纤结构的全光纤Mach-Zehnder(M-Z)干涉仪传感器,并对其温度传感特性进行了研究.实验结果表明,固定光纤锥体和长周期光纤光栅的结构,仅改变两个光纤锥体之间的距离,对应不同的M-Z干涉谐振峰呈现出不同的温度传感特性:随着两个光纤锥体之间的距离增加,位于短波长处的谐振峰,传感器的温度灵敏度减小,而位于长波长处的谐振峰,传感器的温度灵敏度增加.当传感器长度为16.5 cm时,在1 680 nm附近的温度灵敏度达到0.102 06 nm/℃.实验结果对于锥体光纤-长周期光纤光栅组合型温度传感器的优化设计具有重要参考价值.