有机-无机杂化凝胶法合成YAG∶Ce3+荧光粉的包膜及其稳定性

本文以金属硝酸盐为原料，柠檬酸为配位剂的有机-无机杂化凝胶法来合成掺杂三价铈离子的钇铝石榴石荧光粉，采用X-射线衍射法研究了杂化凝胶在煅烧过程中的相转变机制。结果表明:杂化凝胶在煅烧过程中可以通过两条途径形成Y₃Al₅O₁₂(YAG)相:一是由无定形Y₂O₃和Al₂O₃直接向YAG相的一步相转变;二是由无定型Y₂O_{3相似文献}   

速霸螨中克螨特和唑螨酯的高效液相色谱分析

采用Hypersil硅胶柱，在流动相为正己烷-四氢呋喃(体积比90：10)，流速为1．0mL／min，检测波长为230nm，柱温为20℃时，速霸螨中克螨特和唑螨酯得到很好分离；克螨特的平均回收率为100％，标准偏差为0．65g/L，相对标准偏差为0．66％；唑螨酯的平均回收率为98％，标准偏差为0.08g/L，相对标准偏差为0．29％；方法简便、快捷、准确。     

连续碳纤维增强的聚芳醚酮复合材料的层间破坏

用双悬臂梁和端开口弯曲试件分别研究了连续碳纤维增强的聚芳醚酮复合材料(CF/PEK-C)的Ⅰ型和Ⅱ型的层间破坏。CF/PEK-C的Ⅰ型层破坏的线弹性断裂判据G_(Ⅰc)和弹塑性断裂判据J_(Ⅰc)分别为0.69KJ/m~2且与裂纹长度无关。CF/PEK-C的Ⅱ型层间破坏的稳定性,与裂纹和半距之比α/L有关。当α/L小于0.7时,表现为不稳定的Ⅱ型层间破坏的断裂韧性G_(Ⅱc)为1.62KJ/m~2。当α/L大于0.7时,则为稳定的Ⅱ型层间破坏。此时的G_(Ⅱc)与临界点的选择有关。由亚临界点和0.95点法得出的G_(Ⅱc)值分别为1.73和2.74KJ.M~2。     

MOLECULAR DESIGN SYNTHESIS AND PROPERTIES OF SIX KINDS OF MULTIPHASE (STYRENE-ETHYLENE OXIDE)COPOLYMERS

Multiphase copolymers of styrene (S) and ethylene oxide (EO) are amphiphilic, because of the hydrophobic and amorphous polystyrene (PS) segments and the hydrophilic and crystalline polyoxyethylene (PEO). They have many uses including polymeric surfactants, electrostatic charge reducers, compatibilizer in polymer     

NATIONAL STANDARD OF HEAT CAPACITY MEASUREMENT OF SOLIDS IN THE RANGE OF 4.2—90K——AN AUTOMATED ADIABATIC CALORIMETER FROM 25 TO 90K AND MOLAR HEAT CAPACITIES OF α-ALUMINA

The construction of an automated adiabatic calorimeter for heat capacity measurement ofsolids in the temperature range of 25- 90K is described in detail. The sample vessel of thecalorimeter has thin radial vanes which make no contact with its inner wall and are distrib-uted evenly, thus greatly improving the internal thermal equilibration of the vessel. Theprecision of temperature control for the adiabatic shields and electrical leads of the calori-metric system are heightened to a great extent by using the high precision ACD- 79 modeladiabatic controller specially developed by us for this purpose. Measurements of the heatcapacities of high purity α-Al_2O_3, one of the internationally-accepted standard referencematerials, agree with those of the National Bureau of Standards (NBS), USA within ±0.3%,demonstrating the reliability of this apparatus.     

神府烟煤以及贵阳贫煤分别与木屑掺烧灰沉积特性研究

利用CCD相机和沉积探针组成的在线监测系统，在50 kW下行炉上研究了木屑与神府烟煤以及贵阳贫煤的掺烧灰沉积特性。灰渣沉积过程可分为三个阶段：缓慢增长阶段、快速增长阶段和稳定阶段。烟煤掺烧灰沉积厚度随着木屑掺烧比例的增加而增加，贫煤掺烧灰沉积厚度则随着木屑掺烧比例增加而减小。烟煤中掺烧木屑比例为0、6.7%、15%和22%时，渣层稳定厚度分别为1.37、3.85、11.50、20.56 mm，稳定相对热流密度分别为0.44、0.41、0.30、0.26。贫煤掺烧木屑比例为6.7%、15%和22%时，稳定厚度分别为18.65、10.97和9.78 mm，稳定相对热流密度分别为0.29、0.31、0.33。掺烧木屑之后，灰渣初始层中Ca、K元素显著增加。在相同温度下，随着木屑掺烧比例的增加，灰中熔融相比例增加，因为木屑灰分中含有较多的Na₂O、K₂O等碱金属氧化物，而Al₂O₃、SiO₂等含量较少，降低了灰的熔融温度。     

环境样品中五氯苯酚分析方法的研究进展

本文概述了国内外环境样品中五氯苯酚(PCP)测定方法的研究状况,包括分光光度法、HPLC法、GC法和免疫分析法等。重点介绍了PCP的提取、衍生化过程,同时总结了各种方法的优缺点。引用文献19篇。     

通用型激光诱导荧光微流控芯片分析仪的研制与性能考察

设计和研制了一种通用型激光诱导荧光微流控芯片分析仪.检测部分按共聚焦检测原理设计,采用CCD(电荷耦合器件)监测通道,三维自动调节聚焦,发射波长滤光片可方便地更换以适应多种染料选择,能分别显示进样和分离通道2条电流-时间曲线.考察了该分析仪的检测灵敏度、检测极限和线性范围,显示了分析灵敏度高,检测限低和线性范围宽等特点,在自制注塑型PMMA塑料芯片上实现了φX174Haedi-gesT_dNA片段的分离测定和烟叶act基因PCR产物的分析     

CaCO3/PEEK复合体系的力学行为和热行为研究

以聚醚醚酮和碳酸钙复合体系为研究对象,考察了偶联剂和填料添加量对复合材料力学行为和热行为的影响.发现磺化聚醚醚酮作为偶联剂能有效地改善材料的力学性能,提高基体树脂的玻璃化转变温度,降低基体树脂的熔点,有助于改善聚醚醚酮的加工条件     

Identification of Different Cobalt Nucleation on Glassy Carbon

The nucleation mechanisms of cobalt from sulfate solutions were studied by utilizing the electrochemical technique, chronoamperometry. It was found that the recorded current-time transients introduced from 1.0mol/L CoSO4 solution were complexes with unusual shapes. All characteristic features were identified as separate process. The instantaneous or progressive nucleation with 2D or 3D growth exists during the cobalt deposition, depending on the applied potentials.