Ⅱ-Ⅵ族化合物薄膜电致发光

电致发光薄膜是平板显示器的重要材料之一,我们从研究ZnS:Mn,Cu直流电致发光薄膜的大面积稳定发光开始,首次将稀土离子引进直流电致发光薄膜,实现了各色的直流电致发光,并研究其激发机理、过热电子的能量分布、稀土离子的碰撞截面和稀土离子发光中心在晶格中的位置等。在国内首先研制成功ZnS:Mn交流电致发光薄膜计算机终端显示器,并扩大面积到640×480像素(对角线10英寸)。为了实现彩色化显示,研制出稀土离子掺杂的各色交流电致发光薄膜。研究不同稀土离子在薄膜中的浓度猝灭,以便提高薄膜的发光亮度。在致力于实现彩色的过程中,首要的任务是提高蓝色电致发光薄膜的亮度和探索新的蓝色电致发光薄膜材料:从ZnS:TmF₃到CaS:TmF₃,发光亮度有了很大的提高;使SrS:Ce薄膜蓝色电致发光的亮度超过1000cd/m²;同时探索纳米Si和非晶Si/SiO₂超晶格结构的蓝色电致发光。成功地实现了ZnS:Mn/SrS:Ce白色电致发光和SrS:HoF₃三基色线谱发射的白色电致发光,发光亮度也超过1000cd/m²。     

Growth of NaBi（WO4）2 Dendrite and Mechanism

The solid-liquid interface motion of NaBi（WO4）2 （NBWO） melt crystal growth is observed in an in situ system, in which the whole processes of interface transition from fiat interface and cellular to dendrite are visualized. The spacing of the dendrite under smaller temperature gradient turns out to be larger than that under larger temperature gradient, which is found to be sensitive to the temperature distribution. The mechanism of dendrite growth of NBWO is studied based on the model of the growth units of anion coordination polyhedra. The { 001} face has two apex links, so it shows higher stability and has high growth rate and forms the arm of dendrite, whereas the {010} face has only one apex link, and thus shows relative slower growth rate and firstly forms the branches.     

壳聚糖的化学改性及其谱学研究

以壳聚糖(CTS)与硫氰酸铵和氯乙酸反应,合成了带有硫脲基和羧基双官能团的中间产物,再经戊二醛交联,制备了水不溶性的可用于处理含金属废水的颗粒状树脂.用FT-IR进行了表征,表明-HN-C(S)-NH-CH2-COOH基团接枝到CTS链上并形成交联.吸附实验表明,该树脂对Cd2 的吸附量(2.248mmol·g-1)比Mg2 (1.035mm0l·g-1)高得多.再生3次后的树脂仍然具有良好的吸附性能.     

XRD粉末衍射法研究微波场作用下4A分子筛的合成

在微波场作用下合成了粒度均匀、白度和钙离子交换容量高、性能优异的4A分子筛。用XRD粉末衍射法研究了硅铝比、水钠比、微波功率和微波加热时间对微波合成4A分子筛的影响,找出了在微波场作用下合成4A分子筛的最佳条件,并用IR, SEM和DSC等方法对合成的产物进行了表征。     

无催化纳米氧化锌的制备及其光学性质研究

本文采用无催化剂直接蒸发高纯Zn粉,在800℃氧气氛条件下,在Si(111)衬底上生长得到以四角状为主的纳米ZnO(T-ZnO)。T-ZnO纳米线每个角约互成110°,长度约为1.5μm,直径100nm左右;Raman分析表明E2(H)普遍存在于各形态的ZnO;光致发光光谱表明,T-ZnO纳米线的光致发光除了与材料性质有关,还与杂质缺陷有关,蓝绿光带是ZnO的缺陷产生的。     

Ultrasound imaging and evaluation of lesion induced by High Intensity Focused Ultrasound

The present study was to investigate the differential imaging method for detecting HIFU (High Intensity Focused Ultrasound)-induced lesions and the estimation of variation of attenuation for lesion evaluation with log spectral difference algorithm. Experiment results of bovine muscle and liver in vitro were acquired. Several algorithms for lesion detection - Absolute Difference (AD), Sum Absolute Differences (SAD) and Sum Squared Differences (SSD) - were analyzed with several window sizes and threshold values. Then three attenuation parameters were compared to evaluate the degree of tissue damage. It was found that variation of the mean attenuation △α was an effective parameter to evaluate lesions.     

Reactive Ion Etching as Cleaning Method Post Chemical Mechanical Polishing for Phase Change Memory Device

In order to improve nano-scale phase change memory performance, a super-clean interface should be obtained after chemical mechanical polishing （CMP） of Ge2Sb2Te5 phase change films. We use reactive ion etching （RIE） as the cleaning method. The cleaning effect is analysed by scanning electron microscopy and an energy dispersive spectrometer. The results show that particle residue on the surface has been removed. Meanwhile, Ge2Sb2Te5 material stoichiometric content ratios are unchanged. After the top electrode is deposited, currentvoltage characteristics test demonstrates that the set threshold voltage is reduced from 13 V to 2.7V and the threshold current from 0.1 mA to 0.025 mA. Furthermore, we analyse the RIE cleaning principle and compare it with the ultrasonic method.     

X波段长脉冲高功率微波产生的实验研究

 获得长脉冲高功率微波（HPM）输出是HPM源技术追求的重要目标之一。从物理机理上分析了影响慢波结构HPM器件实现长脉冲HPM输出的因素,并利用长脉冲脉冲功率源和过模慢波结构HPM器件,开展了X波段长脉冲HPM产生实验。实验中,采用介质-铜阴极,并在慢波结构表面镀Cr,在导引磁场约0.7 T、二极管电压约400 kV、电流约10 kA、束流脉宽200 ns的条件下,获得了功率500 MW、脉宽约100 ns、主模为TM₀₁的X波段长脉冲HPM输出。对实验结果的分析表明,脉冲功率源与HPM器件的阻抗不匹配,是导致HPM器件输出微波脉宽比电子束脉宽短、以及HPM器件输出微波功率效率较低的主要原因。     

航空发动机旋转叶片振动监测系统研究

介绍了叶尖定时测量旋转叶片的原理，设计的光纤柬式传感结合光电接收实现了高精度的弱光检测。基于“5＋2”传感器均布方案，利用双速率对叶片振动信号进行采样，通过“5＋2”处理算法实现了振动频率的准确辨识，并在某航空设备上进行了高速模拟转子实验，实验表明测得频率与应变仪结果一致。     

S波段锥形磁绝缘线振荡器长脉冲实验研究

 对一种由弱变和强变结构组成的锥形磁绝缘线振荡器进行了长脉冲实验研究。在二极管电压350 kV左右、电流约25 kA、脉宽约128 ns的条件下,获得了500 MW、脉宽约90 ns的高功率微波输出。对波形中出现的拐点进行了分析,研究表明：二极管电压波形好坏会对微波源的性能造成严重的影响,较好的电压波形是实现长脉冲运行的关键。同时对采用不锈钢平面负载、不锈钢丝网状负载以及石墨负载电子收集极进行了实验研究,研究表明采用石墨收集极可以输出较好的微波波形。