克拉霉素漂浮-生物粘附微囊的制备及性能研究

选用乳化-溶剂挥发法制备乙基纤维素载药微球(EMs), 并通过内部凝胶化法进行包衣制得海藻酸钠-乙基纤维素载药微囊(AEMs), 最后通过离子交联法进一步包衣制得壳聚糖-海藻酸钠-乙基纤维素载药微囊(CAEMs). 研究克拉霉素漂浮\|生物粘附微囊的制备工艺, 并考察微囊的体外漂浮性能、 粘附性能及体内滞留性能. 结果表明, CAEMs球形度较好, 药物包封率为72.3%~78.2%, 载药量为7.1%~12.7%. 在pH=5的醋酸缓冲液中, 6 h时的累积释放率为56.6%~70.6%, 漂浮率大于70%, 4 h时的体内滞留率为60.5%. CAEMs有望通过延长药物胃内滞留时间, 在临床用于根除幽门螺旋杆菌, 从而降低消化道溃疡的复发率.     

阿奇霉素片及胶囊剂溶出度考察

采用硫酸显色法对两家药厂生产的阿奇霉素片及胶囊剂进行了溶出度考察。结果表明，阿奇霉素在10－100μg/mL范围内线性关系良好，平均 回收率为99．83％（n=6)。阿奇霉素片及胶囊剂在45min时的溶出量均不低于标示量的80％。而两厂产品体外溶出度结果均达到要求。     

Studies on the phase properties of lyotropic liquid crystals of Brij35/sodium oleate/oleic acid/water system:By means of polarizing microscope,SAXS,~2H-NMR and rheological methods

The pseudo-quaternary phase diagram of Brij35/sodium oleate/oleic acid/water systems has been investigated, and the liquid crystal area has been identified, which covers about two thirds of the whole phase diagram. The liquid crystal structure and behavior have been also studied by using polarizing texture, small angle X-ray scattering, 2H-NMR and rheometer etc. The result shows that when the composition of the system changes along the line of AA′ in this large liquid crystal region, the structural change is cubic→cubic/lamellar→lamellar→lamellar/hexagonal→hexagonal. Meanwhile, we made the first attempt of systematic study of the rheological properties of the above system. The lattice constants of cubic and hexagonal liquid crystals are 10.53 and 5.68 nm, respectively.     

A Large Conformational Change of a Bridged β-Cyclodextrin Dimer in Aqueous Solution

A novel bridged β-CD dimer in which two β-cyclodextrins were linked by a naphthalene at positions 2 and 7 has been synthesized. 1H and 13CNMR measurements showed that a large change in the conformation of the dimer occurred in aqueous solution. The dimer interacted with methyl and ethyl orange to form stable inclusion complexes via "induced fit" mechanism.     

白术挥发油中苍术酮氧化反应的动力学

白术挥发油;苍术酮;动力学方程;活化能;反应机理     

球形钴酸锂的乳液法合成及其结构、性能研究

采用一种特殊乳液法, 制备了锂离子电池正极材料球形LiCoO₂. 分别研究了一次颗粒尺寸、烧结时间对于二次造粒的影响. 还对LiCoO₂球体内部的结构进行了SEM和HRTEM研究, 发现一次颗粒非常紧密地融合在一起, 晶体边界区域没有明显的非晶相区, 也没有纳米级别的孔洞、裂缝. 电化学性能研究表明, 在900 ℃烧结4 h的材料具有较高的首次放电容量(143 mAh•g^－1)和良好的循环性能     

刚性链嵌段共聚物研究 Ⅱ．含双酚S的聚醚醚酮共聚物合成与性能

series of multiblock copolymers composed of polyetheretherketone (PEEK) and 4, 4'-dihydroxydiphenylsulfone (DHDPS) were synthesized by polycondensation. The property of copolymers were characterics by DSC, IR, WAXD and TGA. The results indicate that the T_g of copolymers increases with increasing DHDPS content' When the DHDPS content of the copolymers is less than 22% (the average degree of polymerization of PEEK oligomers is more than 6), the copolymers are Crystalline polymers. The highest T_g of the Crystalline copolymers is 160℃,the lowest T_m is 304℃.     

催化裂化汽油脱硫添加剂USY/ZnO/Al2O3的性能评价

 在固定流化床催化裂化装置上，以减压蜡油为原料，对制备的U\r\nSY／ZnO／Al2O3催化裂化汽油脱硫添加剂的性能进行了评价．结果表明\r\n，随着添加剂添加量和剂油比的增加，生成汽油的硫含量降低．在500\r\n℃和剂油比为5的条件下，在FCC平衡催化剂中添加30％的添加剂时，汽\r\n油的硫含量可由不加添加剂时的1230μg／g降低到770μg／g左右．添\r\n加剂的添加量（10％）较低时，对催化裂化产物的分布基本没有影响；\r\n添加30％的添加剂时，焦炭的产率有所增加，但汽油收率基本不变．X\r\nRD表征结果表明，USY／ZnO／Al2O3添加剂中的ZnO对USY的晶相结构有\r\n一定的破坏作用，但随着反应与再生次数的增多，ZnO与Al2O3之间形成\r\n较为稳定的锌铝尖晶石结构，使添加剂的性能趋于稳定．     

耐高温α-淀粉酶结合Ca2+的研究

测定了耐高温α-淀粉酶分子中含10个Ca2+,脱钙酶逐量补钙后的活力及稳定性研究表明:酶分子中前8个Ca2+参与酶的催化作用,后2个Ca2+抖对酶结构起稳定作用.脱钙酶加钙后室温下的荧光光谱和CD谱表明:酶的构象虽有变化,但不显著,说明酶的构象对ca2+的依赖性很小.脱钙酶结合不同数目的Ca2+,于90℃加热15 min后,测其荧光光谱,结果表明,结合10个Ca2+时,酶保持最大的稳定构象;CD谱表明脱钙酶加热时仍具有一定的螺旋结构.这再次说明,酶的构象对ca2+依赖性较低.     

微量元素对人体健康的影响

阐述了微量元素的生理作用以及对人体健康的影响和微量元素平衡的重要性，对临床医学及日常生活有一定的参考价值。