光纤布拉格光栅传感器应变传递双向耦合分析

粘贴于受弯基体表面的光纤布拉格光栅传感器测量应变与基体真实应变之间存在误差,因此研究光纤布拉格光栅传感器的变形机理、分析测量应变与真实应变之间的关系是目前的研究热点.首先研究光纤布拉格光栅传感器与基体之间的相互作用机理,然后,利用有限元解、实验值和理论解进行对比验证,并分析产生误差的原因.最后,通过参数分析研究弹性模量、厚度、粘结长度等参数对光纤布拉格光栅传感器测量效果的影响.结果表明有限元解、实验值和理论解具有相同的变化趋势,有限元解与理论解的误差在2%以内,测量值与理论解的误差在7%以内.平均应变传递率随着基体弹性模量的增大、粘结长度的增长而逐渐增大,随粘结层弹性模量的减小、粘结层厚度的增大而逐渐减小.该理论对应用于受弯基体应变测量的光纤布拉格光栅传感器的设计具有一定的指导意义.     

氧化铟掺铪红外透明导电薄膜

采用射频磁控溅射与退火工艺相结合的方法,分别在石英和硒化锌(ZnSe)衬底上制备了掺铪氧化铟(IHfO)薄膜,掺杂比例In2O3∶HfO2为98wt.%∶2wt.%.测试了薄膜的组成结构和3～5μm红外波段的光电性质,分析了退火温度、薄膜厚度和氧气流速对薄膜性能的影响.X射线衍射、扫描电子显微镜和X射线能谱表明,制备的IHfO薄膜具有氧化铟的立方体结构,掺杂铪并没有影响氧化铟的生长方向,但是减小了晶格间距,铪与铟外层电子形成新的杂化轨道.傅里叶变换红外光谱表明,随着退火温度的增加,IHfO薄膜在3～5μm波段的透过率逐渐下降,沉积在ZnSe衬底上的薄膜具有更平稳的透过率,厚度为100nm薄膜在3～5μm波段平均透过率为68%.测试霍尔效应表明,随着氧气流速的增加,IHfO薄膜电阻率逐渐增加,载流子浓度减小,霍尔迁移率变化不明显.晶界散射是影响IHfO薄膜迁移率的主要因素,当氧气流速为0.3sccm时,薄膜最佳电阻率为3.3×10~(-2)Ω·cm.与透可见光波段的导电氧化铟锡(ITO)薄膜相比,制备的IHfO薄膜可以应用在3～5μm红外波段检测气体,红外制导等领域.     

低喷淋密度超亲水表面水平管降液膜温度分布

水平管降液膜蒸发广泛应用在石油、化工、海水淡化等领域,对低喷淋密度温度演化规律的研究有助于拓宽其应用范围,理解其微观机理。本文在超亲水表面上结合红外热追踪技术,对水平管降液膜表面的温度演化规律进行了研究,分析了温度分区现象和温升规律。实验中首次发现了马鞍形液膜内部的高温环状结构,并结合三维数值模拟揭示了掺混作用导致的局部高温环状结构形成的内部机理。     

Determining elemental strontium distribution in rat bones treated with strontium ranelate and strontium citrate using 2D micro-XRF and 3D dual energy K-edge subtraction synchrotron imaging

Strontium-based medications, such as strontium ranelate, have been suggested to have therapeutic effects in patients with osteoporosis. Strontium salts available off-shelf in stores across North America are assumed to provide similar effects as strontium ranelate and thus should lead to similar distributions of elemental strontium incorporated in bone. The objective of this study was to compare the spatial distribution of strontium in animal bones following the administration of strontium ranelate and strontium citrate. Seventeen-week-old Sprague–Dawley rats were split into three groups over 10 weeks and given 625 mg/kg/day of strontium ranelate and 676 mg/kg/day of strontium citrate; the control group received no additional supplementary strontium. The humeri were collected from all animals, and strontium distribution was mapped using 2D micro-XRF and 3D dual energy K-edge subtraction (KES) imaging. 2D and 3D elemental mapping methods demonstrated that strontium delivered during treatment by both salts had the same spatial distribution. 3D elemental strontium maps of treated animal bones showed that strontium was largely observed in the trabecular regions under the epiphyseal (growth) plate. The thickness of the strontium layers in both the strontium ranelate and strontium citrate sample was not significantly different (p = .9201). 2D micro-XRF and 3D dual-energy KES images effectively elucidated the spatial distribution of elemental strontium in calcified tissue. These methods provide a novel approach to evaluating the potential efficacy of strontium supplements in the treatment of osteoporosis.     

Characterisation of ancient Roman wall-painting fragments using non-destructive IBA and MA-XRF techniques

Scientific investigation is very important in studies addressing issues of archaeological and historical objects. Ion beam analysis (IBA) and macro X-ray fluorescence (MA-XRF) spectroscopy are remarkable tools to obtain information about elemental composition and imaging of historical artefacts with a non-invasive character. These investigation techniques were employed in the framework of a project aimed at supporting the characterization of materials and techniques related with the Roman wall painting. The archaeological excavations at Villa della Piscina in Rome have revealed a luxury building with a large pool (about 50 m long) and thermal baths and numerous fragments of plaster, coming from intentional demolitions referable to two distinct architectural contexts of the Villa during the imperial age, have been found. This work deals with studying the interesting wall pictorial apparatus of great cultural value of the heritage inherited from the Roman age in the area of the ancient city of Rome. The colour palette of the pigments investigated, in particular, by MA-XRF and particle-induced X-ray emission (PIXE) and has revealed Fe, Cu, Pb, Si and Hg as main elements. Traces of other constituents uncover the choice of the different colours chosen by the artists who had embellished the rooms of the Villa.     

四溴四苯基卟啉及其金属配合物的电子结构和四溴四苯基卟啉Ni(II)的晶体结构

本文合成了7, 8, 17, 18-四溴-5, 10, 15, 20-四苯基-21, 23(H)-卟啉(H~2TPPBr~4)及其金属配合物MTPPBr~4[M=Cu(II), Ni(II), Co(II)和Zn(II)]。测定了它们的可见紫外光谱和循环伏安, 用四轨道模型(Four Orbital Model)计算了MTPPBr~4的相对前线轨道, 并解释了配合物的可见紫外光谱及电化学性质。测定了NiTPPBr~4的晶体结构, 晶体属单斜晶系, 空间群C2/c, a=2.6077(7),b=1.0414(4), c=1.9312(3)nm, β=137.1(7)°, Z=4, 最后偏离因子R=0.067, 晶体结构直接证明了卟啉亲电溴化反应具有区域选择性, 四个溴分布在相对两个吡咯环上。     

苯甲酸钠团簇离子的形成和结构

用串级飞行时间质谱(Tandem TOF)仪研究了激光蒸发方法产生的苯甲酸钠及裂解产物团簇离子的形成和可能的构型。通过对苯甲酸钠团簇离子的紫外光解的研究, 决定了反应通道及分支比, 并定性地讨论了其结构特征。     

氧化铈对Pd／Al2O3表面上CO氧化性能的影响

采用ＴＰＤ－ＭＳ及ＴＰＳＲ－ＭＳ技术研究了添加ＣｅＯ２对Ｐｄ／Ａｌ２Ｏ３催化剂上ＣＯ脱附、表面反应及表面氧脱附等性能的影响，考察了不同含氧量的气氛下ＣＯ的氧化活性，结果表明，Ｐｄ－Ｃｅ间的相互作用有利于各自原子上表面氧的吸脱附及ＣＯ的表面反应，并发现ＣＯ２脱附量大小及峰温次序与对ＣＯ的催化氧化活性有一致的对应关系。     

金属硫族化合物CsSb2(Se2)0.5Se3的溶剂热合成及其晶体结构分析

以有机溶剂热生长技术(Solvothermal Technique)在180 ℃乙二胺(en)溶液中以SbCl₃与碱金属硒化物Cs₂Se和Se在密闭容器中反应7 d,制备出新的金属硫族化合物CsSb₂(Se₂)_0.5Se₃。以单晶X射线衍射技术测得晶体结构属三斜晶系,空间群为P1,晶胞参数：a=0.653 0(2) nm,b=0.707 1(3) nm,c=0.979 9(4) nm,α=80.37(3)°,β=86.28(3)°,γ=74.61(3)°,V=0.430 0(3) nm³,Z=2。     

锰/钴-二氰胺-4-(1-咪唑基)苯胺三元配合物的合成与结构表征

以二氰胺钠[Na(dca)]和4-(1-咪唑基)苯胺(L)为共配体分别与锰盐和钴盐反应合成了2种新的配合物：零维[Mn(L)₂(dca)₂(H₂O)₂] (1)和二维[Co(L)₂(dca)](dca)_0.5(ClO₄)_0.5·1.5H₂O·MeOH (2)。通过元素分析、红外光谱和X射线单晶衍射对其进行了表征。配合物1属于三斜晶系，P1空间群。配合物2晶体属于正交晶系，Cmcm空间群。配合物1是1个中心对称的单核结构，锰(Ⅱ)离子与分别来自2个dca和2个L配体的4个氮原子以及2个水分子配位，形成八面体配位几何，L和dca均为单齿配位；配合物2是由混合桥dca和L组装成的二维配位聚合物网状结构，相邻的二维网以面对面方式堆积，沿c轴方向形成一维孔道，里面填充着未配位的反离子和溶剂分子。