地锦草有效成分的提取及其生物活性的研究

采用乙醇浸提法来提取地锦草中的有效成分,并对其生物活性进行研究。探讨了地锦草总黄酮的最佳提取工艺;通过体外抗氧化实验,对地锦草提取物的抗氧化活性进行研究;同时考察了提取物对大肠杆菌、枯草芽孢杆菌、青霉、曲霉的抗菌性能,并对地锦草提取物对α-淀粉酶的抑制活性进行研究。实验结果表明:地锦草总黄酮最佳提取工艺为乙醇体积分数为85%,料液比为1∶15,提取次数为3次;体外抗氧化实验表明,地锦草具有抗氧化活性,且在浓度为8 mg/mL最为明显;抗菌性能实验表明,地锦草具有抗菌性能,且对青霉、曲霉的抗菌效果比较显著;α-淀粉酶的抑制活性的实验表明,地锦草提取物对α-淀粉酶的活性有抑制能力,在pH 6.8、浓度为4.8 mg/mL、温度为70℃时,其对α-淀粉酶的抑制效果达到最大。     

不同烟草生物质热解释放致香物质的研究

采用烟叶和烟梗为原料,使用热裂解气相色谱法对烟草的燃烧时间、燃烧温度进行控制,精确模拟实际烟草致香物质释放环境,精确捕获、并半定量物质,从而在实验室模拟、分析、研究烟草燃烧物中致香物质的组成和特点。研究分别考察了两种生物质在500℃、550℃下释放的致香物质组成。结果表明,烟梗、烟叶中元素组成中硫、氮两种元素含量低,而C/H比值两种烟草生物质均较高。两个热解温度下烟叶的热解产物中致香物质的含量均明显高于烟梗。升高热解温度均有利于获得更高相对含量的热解成分。烟叶热解产物中烯烃类物质相对含量比烟梗中多,而烟梗热解产物中酚类物质含量比烟叶中多。提高热解温度有利于酮类致香物质含量产生。     

饲料中重金属检测技术的研究进展

综述了饲料中重金属的检测方法如光谱分析法(包括原子吸收光谱法、原子荧光光谱法、电感耦合等离子体发射光谱法、X-射线荧光光谱法和激光诱导击穿光谱法)、电感耦合等离子体质谱法、电化学分析法和分光光度法的研究进展,对各类检测方法的优缺点进行了对比与分析,并在此基础上对饲料中重金属检测技术的发展趋势进行了展望。     

A Study of Protein and Glycoprotein Syntheses in Pre-implantation Mouse Embryos Using Mini-2D-Electrophoresis, Video Densitometer Scanning and Computer-Image Analysis

In the present study, proteins and glycoproteins of mouse embryos at 2-cell,morula and blastocyst stages were analyzed.The techniques of ~(35)S-Met incorporation,ConA antiserum-precipitating ConA-binding proteins, mini-2D-electrophoresis, fluorography,video densitometer scanning and the computer-lmage system were used for analyses.Results of the investigations indicated that proteins and glycoproteins were synthesized by the embryos in a gradual increase manner from 2-cell to blastocyst. A relatively large amount of glycoproteins was synthesized during the morula and blastocyst stages.Two specific small glycoproteins respectively with molecular weights about 6500 and 9000 and PIs at 5.0 and 6.5 were apparently synthesized in the blastocyst but not in the 2-cell or the morula.     

A New Criterion for Brittle-Ductile Transition of Polymer Blends

The T_c criterion was first used by S. Wu for characterizing the brittleductile (B-D) transition of N6/EPDM blends. But in this paper, a new criterion which is based on the stress analysis of blends is proposed to characterize the B-D transitions of blends, namely, A criterionV_(fc) and d_c are the critical volume fractions and particle size of dispersed particles in blends, respectively. For given blends, A is independent of the morphology of dispersed phase and is only the characteristic parameter of matrix. The B-D transitions of different blends, including polar N6/EPDM blends, nonpolar PP/EPDM blends and PE/CaCO_3 composites, were manipulated with A criterion and satisfactory results were obtained. In addition, a new master curve for the impact strength of PP/EPDM blends versus V_f~2/d was obtained. The results showed that A criterion is more suitable than T_c criterion for characterizing the B-D transition of blends.     

Homolytic reductive alkylation of methylvinyl ketone with ethers by Ti(III) decomposition of t-butyl hydroperoxide

Reductive alkylatin of methylvinylketone has been accomplished by hydrogen abstraction from cyclic ethers with the redox couple: t-butyl hydroperoxide-titanous chloride. A redox radical mechanism is proposed and the selectivity of the hydrogen abstraction by t-butoxy radicals and reduction of α-ketoalkyl radical by titanous ions is discussed.     

弱凝胶钻井液成胶剂AM/AMPS/OA_8的合成与表征

针对水平井、大斜度井钻井过程中井眼润滑性、岩屑携带以及钻井速度的影响等问题,通过合理的分子设计,以丙烯酰胺(AM)、2-丙烯酰胺-2-甲基丙磺酸(AMPS)和实验室自制疏水单体丙烯酸正辛醇OA_8为原料,利用胶束聚合法,制备了一种弱凝胶成胶剂AMAMPSOA_8,其结构经1H NMR和IR表征。以AMAMPSOA_8在低剪切速率下的表观粘度为指标设计正交试验,确定最优反应条件为:AM与AMPS摩尔配比为4.8∶1,引发剂用量为单体总质量的0.04%,疏水单体浓度为0.75%,于70℃反应9 h。该条件下,0.5%AMAMPS0A_8聚合物溶液在低剪切速率3 r·min~(-1)下表观粘度可达23 680 mPa·s。利用热分析仪、高温滚子炉、高温高压流变仪对产物性能进行了研究。研究表明:AMAMPSOA_8的抗温性能可达160℃;聚合物溶液体系有明显的触变性,在40 min后溶液切力增加幅度变缓。     

熟手-新手化学教师“化学键”课堂教学行为特征比较研究

通过对熟手教师和新手教师的6节常态课堂中教学行为对类型、所用时间以及分布特征进行对比分析,发现熟手教师在各个小类教学行为对上的使用、教学行为转换上好于新手教师,新手教师在教学行为对使用的时间利用率上低于熟手教师。在常态课教学中,熟手教师和新手教师都应该多尝试采用开放度较高的教学行为对,新手教师要更加关注学生,引导学生思考,积极参与课堂。     

可瓷化硅橡胶材料的研究

研究了一种可瓷化硅橡胶,其特点是在火灾发生时可在金属线外形成瓷化绝缘保护层,600℃的成瓷温度大幅度低于目前文献报道的成瓷温度。实验得到的优化瓷化填料配方为:相对于100份混炼胶,氧化铝10份、硅灰石15份、结构控制剂9份、碳酸锂3份。在此配方条件下,未瓷化硅橡胶的断裂伸长率316%、拉伸强度10.79MPa、体积电阻率134×10~(12)Ω·cm,其在600℃、800℃瓷化后的抗压强度分别为3.47MPa、10.13MPa、体积电阻率≥28×10~(12)Ω·cm,满足电缆用硅橡胶的力学和绝缘要求。经热重分析及SEM分析可知加入瓷化填料后,试样烧蚀重量减少了39.4%,烧蚀残留率大大提高,且成瓷试样结构致密。     

Improving the mechanical properties of CNF films by NMMO partial dissolution with hot calender activation

Reinforcing of cellulose nanofibril (CNF) films by partial dissolution with N-methylmorpholine-N-oxide (NMMO) was investigated. The method investigated is composed of impregnation of CNF film with liquid solution of NMMO followed by dry heat activation. The heat activation of the impregnated film was carried out using a heated calendering nip, which enabled simultaneous heating and compression. The partial dissolution of cellulose by NMMO caused a significant increase in the transparency of CNF film due to the decrease of film porosity and increased surface smoothness. The dry strength of the reinforced film was increased from 122 up to 195 MPa. Furthermore, the wet strength of the reinforced film was up to 70% greater than the dry strength of pure CNF film. The changes in the fibrillar structure were investigated with topographical imaging (SEM and AFM) and spectroscopically using NMR and FTIR. No significant changes in the fibril structure or cellulose morphology were observed. Moreover, the treated film resisted significant water pressure, highlighting CNF film’s permanent water resistance. The partial dissolution process with NMMO was also capable of reinforcing a CNF composite film with macro scale structural elements (lyocell short-cut fibres). The strategy investigated is a robust and fast method to improve the mechanical properties of fibrillary cellulose films, allowing them utilization in applications where improved water resistance and fully cellulosic character are required properties.