G-网络排队系统的研究新进展

在研究排队网络的文献中,G-网络(即推广的排队网络)最近受到了国际学者广泛的关注,它的研究在一定程度上丰富了排队网络的内容.正因为有很多学者投入到此项研究中,新的结果是层出不穷的.本文简短地介绍G-网络近年来的发展.     

凸域内弦的平均长度

本文研究了凸域内弦的平均长度.通过广义支持函数与凸域的弦幂积分,建立了凸域内弦的平均长度的一般公式,并用此公式得出了圆域和矩形域内弦的平均长度.     

Multiband Terahertz Photonic Band Gaps of Subwavelength Planar Fractals

Optical transmission properties of subwavelength planar fractals in terahertz （THz） frequency regime are studied by means of time-domain spectroscopy. The transmission spectra with multiple pass bands and stop bands are observed. The tunable photonic band gaps are realized by changing the angle between the principle axis of planar fractal and the polarization of THz wave. The possible application of the subwavelength optical component is discussed. We attribute the detected transmittance from subwavelength fractals to localized resonances.     

A Rapid Solid-phase Synthesis to Soluble Oligothiophene Molecular Wires

A novel method for the preparation of oligothiophene molecular wires is described via a bi-directional solid-phase synthesis. Using an alternating sequence of bromination and Stille coupling reactions, oligomers were obtained up to the heptamer in excellent yield and purity.     

用OZSAD软件实现复合式变焦凸轮曲线优化设计

变焦距光学系统凸轮曲线设计是保证光学系统变焦精确、平滑和驱动力均衡的关键。以2运动组元变焦系统的牛顿法变焦推导公式为依据，分析等间隔设计和等角距设计凸轮曲线方法的特点，结合EBA20X10光学镜头设计实例，探讨了结合2者优点实现复合式凸轮曲线优化设计的方法。文中等间距是指变倍透镜组沿光轴的移动量与凸轮转角呈线性关系，凸轮曲线沿圆周展开为直线；等角距是指系统焦距与凸轮转角呈线性关系。最后介绍了可实现3种凸轮曲线辅助设计的软件工具OZSAD V1.2。设计结果表明，该设计方法可以降低凸轮曲线压力角，减少总展开角及加工点对数，还可保证凸轮的设计精度。     

正丁基苝四羧酸二酰亚胺的晶型和性能研究

文章合成了N,N'-二正丁基苝四羧酸二酰亚胺,并纯化、调晶,进行了IR、元素分析、X射线等测定.分析该化合物在DMF中的紫外光谱(最大吸收波长524.80 nm)、荧光光谱(最大发射波长539.0 nm)、Stokes位移(数值15 nm)等光谱性质.在400～700 nm范围内,α晶型薄膜紫外-可见吸收出现很强的吸收峰,且由β型变为α型,最大吸收波长有明显的红移(545 nm变为580 nm).X射线粉末衍射也反映出α晶型的2θ在26.0°处衍射峰CPS为2 508,β型在25.2°为1 891.α,β晶型作为电荷产生材料制得的功能分离型有机光导体,在光源滤波波长λ=532 nm曝光下,测得含α,β感光体达到饱和电位的时间分别为46,93.98 s,光衰电位(5.3千伏电压负充电电晕,1～2 s后的表面电位)分别为727和525 V,半衰曝光量分别为4.32,4.34μJ·cm-2,残余电位分别为30和45 V等光导性能数值.     

Optical characteristics of semiconductor saturable absorber mirrors investigated by the reflection Z-scan technique

Recently, the semiconductor saturable absorber mirror (SESAM) has become a key component of passive mode-locked solid-state lasers. Here we present a simple method based on the reflection Z-scan technique to measure the key optical parameters of SESAM such as saturation fluence and modulation depth. The experimental results demonstrate that our method is able to perform with a high accuracy of 10⁻⁴ and a dynamic range of over four orders of magnitude.     

塑料闪烁体的辐照特性

利用⁶⁰Co放射源分别对3种塑料闪烁体(BC-408, EJ-200, BC-404)进行辐照损伤研究, 比较辐照前后的透射谱、发射谱及光产额的变化, 发现3种闪烁体在低剂量具有较好的抗辐照性能; 当照射剂量超过1.44×10⁴Gy时,透射谱明显变坏, 光输出减少很严重, 但发射谱却保持不变.     

短波通滤光片膜系设计

详细介绍用等效折射率概念设计短波通滤光片的原理和计算方法。根据原理和方法，选择二氧化钛（TiO2）作为高折射率材料、二氧化硅（SiO2）作为低折射率材料。首先从理论上计算出用这2种材料设计的波长λ=950～1150nm的短波通滤光片所需要的周期数，然后给出短波通滤光片的主膜系和光谱曲线。由于据此周期数设计出的膜系光谱曲线在750～810nm处的透过率不符合要求，因此对该膜系进行了改进。依照改进的设计进行多次制备，最终制备出了符合要求的短波通滤光片，找到了最佳制备工艺和方法。最后，对制备出来的短波通滤光片薄膜进行了各种环境实验。实验结果表明，膜层的各项指标符合设计要求。     

Photoinduced Transformation between Charge Carrier and Spin Carrier in Polymers

By dynamical simulations, we show a transforming process between neutral soliton （spin carrier） and charged soliton （charge carrier） in polymers via photo-excitation, taking a polaron as the transitional bridge. It is photoinduced transformation between spin carrier and charge carrier. In this way, we demonstrate an access for polymers to be applied to spintronics.