强流ECR离子源引出系统研究

为了提高强流ECR 离子源的引出束流品质,分别设计了1# 和2# 引出系统,利用束流引出模拟软件PBGUNS 对1# 和2# 引出系统进行了质子束流引出与传输的模拟计算,结合实际测得的发射度数据分析引出系统,发现2# 引出系统比1# 引出系统引出束流品质高。对ECR 离子源引出系统的电势等位线分布等参数引起的球差进行了简单数学推导及MATLAB 绘图,并结合1# 和2# 引出系统束流相图模拟结果证明了球差会使引出束流品质有效发射度增长,通过适当加大电极孔径可改善束流聚焦情况,得到了束流光学聚焦较好的束流引出系统设计。To improve the quality of extracted ion beam from a high current ECR ion source, 1# and 2# extraction systems were designed and tested. The PBGUNS code was used to simulate the 1# and 2# extraction systems of proton ion beam. The emittance measurement results with the two different extraction systems were compared and analyzed with the simulation, the conclusion that more high quality beam extracted from 2# system than 1# system was got. The formula derivation of ECR ion source extraction system spherical aberration and MATLAB drawing was done by the analyzing on the distribution of extraction field equipotentials, effective emittance increasing caused by spherical berration was proved by 1# and 2# extraction systems beam phase space simulation result, beam focusing would be improved if electrode hole size increasing appropriately and a general concept on good optics focusing of ion beam extraction system was proposed finally.     

壳模型哈密顿量本征值的美与奇

本征值问题是自然科学中基本运算之一,对于超大矩阵的对角化是当今许多科学问题的瓶颈。在应用原子核壳模型理论研究较重的原子核结构时,因为壳模型组态太大,通常的方法是基于各种物理考虑做某些组态截断,另一个思路是利用新的算法和飞速发展的计算机资源对这些大矩阵对角化或者近似对角化。总结了本课题组近年来在壳模型哈密顿量本征值近似方面研究的主要结果,包括最低本征值半经验公式及多种外推方法、本征值与对角元的相关性等。The eigenvalue problem is one of the fundamental issues of sciences. Many research fields have been challenged by diagonalizing huge matrices. The nuclear structure theorists face this problem in studies of medium-heavynuclei in terms of the nuclear shell model, in which the configuration space is too gigantic to handle. Thus one usually truncates the nuclear shell model configuration space based on various considerations. Another approach is to make use of super computers by various algorithms, and/or to obtain approximate eigenvalues. In this paper we review our recent efforts in obtaining approximate eigenvalues of the nuclear shell model Hamiltonian, with the focus on our semi-empirical approach and a number of extrapolation approaches towards predicting the lowest eigenvalue, as well as strong correlation between the sorted eigenvalues and the diagonal matrix elements, and so on.     

生成超重核的熔合反应中的动力学形变效应

利用包含动力学势能面的双核模型对超重核的生成机制中的一些问题进行了研究。对双核系统的粒子交换势能面进行的计算结果表明,反应过程中原子核动力学形变对于粒子交换势能面的结构有显著的影响。进一步计算了生成超重核的熔合几率,结果显示,原子核的动力学形变导致内熔合位垒升高,进而明显降低了生成超重核的熔合几率。Some aspects in the fusion mechanism for the production of superheavy nuclei are investigated with the dinuclear system model with dynamical potential energy surface. The calculation results about the potential energy surface indicate that the inclusion of nuclear dynamical deformation affects the structure of potential energy surface significantly.The investigation on the fusion probability to synthesize superheavy nuclei indicates that the fusion probability decreases significantly due to the increase of the inner fusion barrier for the inclusion of the nuclear dynamical deformation.     

提高全息图衍射效率的一种方法

本文介绍用稀释显影提高全息图衍射效率的方法。给出了稀释显影的特性曲线以及衍射效率与显影时间、曝光量之间的关系。得到了三种全息干板的高衍射效率。 关键词：     

用差矢法标定高级劳厄点

对于电子衍射谱的高级劳厄带斑点标定,提出一种新的方法。直接通过测定亮衍射斑的点间距和向量合成来标定高级劳厄带第一个衍射斑的指数,进一步导出最靠近入射斑和其它的斑点指数。 关键词：     

强激光照射下,α-LiIO3晶体中晶格振动的多模激发和模之间的相互作用

本文叙述了用调Q倍频YAG脉冲激光照射α-LiIO₃晶体,在不同的散射配置下,获得了各种散射谱图。实验表明,当用e光入射时,可以比用o光入射激发起更多不同模的晶格振动;获得了E₂模的很强的一阶、二阶斯托克斯散射线和反斯托克斯散射线,E₁模Polariton的一阶、二阶、三阶斯托克斯线和反斯托克斯线,还获得了反斯托克斯频率区一条频移为469cm^-1的新线,认为是不同模的Polariton之间的相互作用引起的。最后,提到实验中初步观察到的晶体拉曼活性的“疲劳现象”。 关键词：     

ISOMERIC CROSS SECTION RATIO IN THE 197Au(n,2n)196Au REACTION

Isomeric cross section ratio for the ¹⁹⁷Au (n, 2n) reaction at 15 MeV is measured by the activation method. Using the Huizenga and Vandenbosch method, the isomeric ratio is calculated for the reaction. From the comparison of the measured and theoretically calculated isomeric ratio, the values of the spin cut-off factor and nuclear moment of inertia are determined.