氯氮平、去甲氯氮平及奥氮平的高效液相色谱电化学检测特性的研究

 采用高效液相色谱安培电化学检测法 ,考察了氯氮平、去甲氯氮平和奥氮平在不同 pH值流动相下的色谱分离情况及其色谱峰高与检测电压的关系。结果表明 ,氯氮平、去甲氯氮平和奥氮平的保留时间均随流动相 pH值的升高而延长 ;在pH值为 4 5 6和 5 5 6的流动相中 ,均可实现基线分离。 3种化合物的色谱峰高与检测电压之间呈典型的“S”型曲线 ,pH值升高时该曲线均左移。氯氮平、去甲氯氮平和奥氮平的检测电压必须大于产生最大氧化电流的最低电压才能得到稳定的检测电流。这种典型的“S”型伏安曲线对于化合物的定量和定性检测具有重要意义。     

钴的二苯甲酰甲烷配合物：晶体结构及其轴向置换反应

Cobalt(Ⅱ) can form complexes with Hdbm in different environments. Hdbm reacted with cobalt nitrate to give complex 1 [Co(dbm)₂·2H₂O]. When complex 1 reacted with pyridine， α-stilbazole or 4，4′-bipyridine respectively， complex 2 [Co(DBM)₂Py₂] (Py=pyridine)， 3 [Co(DBM)₂Sbz₂] (Sbz=α-stilbazole) or 4 [Co(DBM)₂BPy]_n was obtained in turn through metathetical reaction. The coordination modes are octahedral polyhedrons. In the crystal structures， the two dbms take the plane position and two other donor molecules take the axial position. CCDC： 196070 for complex 2; 186859 for complex 3.     

高比表面积介孔网状氧化镁的制备、表征及对废水中Pb(Ⅱ)的吸附性能和机理

以天然水菱镁矿为原料，通过"煅烧-水化-煅烧"的简单方法制备了高比表面积介孔网状MgO，且实验过程中无须加入任何试剂。系统性研究了氧化镁用量、吸附时间、吸附温度及pH对氧化镁吸附模拟废水中铅离子吸附性能的影响，揭示了吸附机理，并考察了氧化镁对多种离子的吸附效果。结果表明：该氧化镁吸附剂具有188 m²·g^-1的高比表面积和0.85 cm³·g^-1的高孔体积，平均孔径为12.33 nm，其吸附动力学和等温线数据与伪二级模型和Langmuir模型高度吻合，表明重金属离子在氧化镁上为单层化学吸附。MgO介孔网状结构表现出对Pb（Ⅱ）的高吸附性能，最大吸附量为7 431.5 mg·g^-1，该数值远高于其他报道的基于MgO吸附剂的数值，铅去除率高达99.8%以上。介孔网状MgO的吸附机理主要是羟基官能团以及Mg（Ⅱ）与MgO表面重金属离子之间的离子交换所致。另外，该氧化镁可同时吸附多种离子，对Cd、Cr、Ni、As、Co、P、Se、Be、Bi、Cu、Fe、Mn、V、Zn、Al离子均具有优异的吸附性能。     

基于芳香四羧酸构筑的两种配位聚合物的荧光及磁性质（英文）

在溶剂热条件下,基于芳香四羧酸合成了2种新颖的配位聚合物:{[Zn2(tptc)(1,4-bimb)2]·H2O}n(1)和{[Ni(tptc)0.5(1,2-bimb)(H2O)]·H2O}n(2),其中,tptc为对-三联苯-3,3″,5,5″-四羧酸,1,4-bimb为1,4-二(咪唑-1-亚甲基)苯,1,2-bimb为1,2-二(咪唑-1-亚甲基)苯。结构分析表明,1为三维结构,拓扑符号为(86);2为二维层状网络,通过氢键相互作用进一步扩展为三维超分子结构。此外,我们还研究了1对阳离子、阴离子的荧光感应以及2的磁性质。     

半绝缘GaAs的欧姆接触电极材料Ag/Co掺杂的非晶碳膜制备与检测

稳定的欧姆接触对半导体器件的正常工作起到至关重要的作用.目前市场上主要采用金/金锗镍合金作为n型GaAs的电极材料,工艺复杂,成本高昂.本文研究了一种新型的、廉价的适用于半绝缘GaAs的欧姆接触电极材料Ag/Co掺杂的非晶碳膜及其制备过程,以便于读者对半导体器件的制备工艺和流程有所了解.     

石墨烯基水凝胶的研究进展

石墨烯独特的分子结构使其具有优异的物理化学性质,这引起了国内外学者的研究兴趣。研究者们相继制备出了各种石墨烯基复合材料,其中,石墨烯基水凝胶是一种实用而吸引人的材料,有着广泛的应用前景。本文对石墨烯基水凝胶的研究进展进行了综述,对其在超级电容器、生物医药、水处理等方面的应用做了相关介绍,并对石墨烯基水凝胶的发展前景进行了展望。     

In Situ Anchoring of Pyrrhotite on Graphitic Carbon Nitride Nanosheet for Efficient Immobilization of Uranium

Enrichment of U^VI is an urgent project for nuclear energy development. Herein, magnetic graphitic carbon nitride nanosheets were successfully prepared by in situ anchoring of pyrrhotite (Fe₇S₈) on the graphitic carbon nitride nanosheet (CNNS), which were used for capturing U^VI. The structural characterizations of Fe₇S₈/CNNS-1 indicated that the CNNS could prevent the aggregation of Fe₇S₈ and the saturation magnetization was 4.69 emu g⁻¹, which meant that it was easy to separate the adsorbent from the solution. Adsorption experiments were performed to investigate the sorption properties. The results disclosed that the sorption data conformed to the Langmuir isotherm model with the maximum adsorption capacity of 572.78 mg g⁻¹ at 298 K. The results of X-ray photoelectron spectroscopy (XPS) demonstrated that the main adsorption mechanism are as follows: U^VI is adsorbed on the surface of Fe₇S₈/CNNS-1 through surface complexation initially, then it was reduced to insoluble U^IV. Thereby, this work provided an efficient and easy to handle sorbent material for extraction of U^VI.     

Preparation of hydrophilic poly(vinylidene fluoride) membrane by in-situ grafting of N-vinyl pyrrolidone via a reactive vapor induced phase separation procedure

Increasing hydrophilicity of hydrophobic membrane is one of the strategies to improve its antifouling performance. Herein we report a procedure of reactive-vapor induced phase separation to prepare an N-vinyl pyrrolidone (NVP) modified poly(vinylidene fluoride) (PVDF) membrane to improve its hydrophilicity. PVDF solution containing NVP monomer was cast in ammonia water vapor atmosphere to prepare the modified membrane. During the process, PVDF was dehydrofluorinated by the reactive vapor of ammonia water to generate double bond of FC═CH, and then NVP was grafted. The degree of grafting modification and the microstructure evolution of the membrane were studied by adjusting the amount of NVP addition. A possible mechanism of membrane formation from crystallization gelling to non-crystallization gelling has been proposed to understand the morphology change from nodular sphere to bi-continuous microstructure with fibril matrix. It has been found that rising the degree of modification has changed the polymorph of PVDF from β to α crystalline phase, as well as turned the hydrophobic PVDF membrane into hydrophilic. Moreover, the modified membrane displayed obvious reduction in bovine serum albumin adsorption, suggesting improvement in anti-fouling performance. Therefore, our work provides an easy strategy to prepare hydrophilic PVDF membrane, which may have promising potential applications.     

含酰胺结构超低膨胀聚酰亚胺薄膜的热膨胀行为

采用联苯二酐与3种含酰胺结构二胺制备了具有不同取代基团的聚酰胺-酰亚胺薄膜, 考察了酰胺结构对薄膜力学、 耐热及尺寸稳定性的影响, 研究了聚集态结构与薄膜热膨胀行为的关系和规律. 该系列薄膜具有超高强度和优异的耐热性能, 拉伸强度高达280.5 MPa, 玻璃化转变温度在389~409 ℃, 并在30~300 ℃温度范围内表现出超低负膨胀, 热膨胀系数(CTE, ppm/℃, 即10 ⁶ cm·cm ^-1·℃ ^-1)在-3.05~-1.74 ppm/℃之间. 聚集态分析结果表明, 酰胺结构使分子链间形成了强氢键相互作用, 分子链在薄膜面内方向高度有序取向, 并在膜厚方向堆积更为紧密, 使薄膜表现出热收缩现象. 通过不同体积大小的取代基团进一步调控分子链间相互作用及排列堆积, 可实现薄膜在高温下近乎零尺寸形变, 为设计制备超低膨胀聚合物基板材料提供了新思路.