Study of methods for evaluating the probability of multiple site damage occurrences

Two methods currently available for evaluating the probability of Multiple Site Damage(MSD)occurrence were studied in this paper.One of the methods is a probabilistic analysis approach based on the statistical theory and fatigue characteristics of each structural detail,and the other is an approach which defines the initial damage scenario by means of Monte-Carlo simulation,and multiple initial crack scenarios are randomly generated.A modified method based on the Monte-Carlo simulation was proposed in this paper,in which the random fluctuation of the stress was considered to give more accurate evaluation results.In the presented method,the probability of MSD occurrence in a structural element containing multiple details was calculated based on the Monte-Carlo simulation and the p-S-N curve of a single structural detail.Fatigue tests were accomplished using specimens containing 21-similar-details to obtain the fatigue life corresponding to MSD occurrence.Tests on single-detail specimens and static calibration tests were also conducted to get the basic fatigue properties of the material and the degree of stress fluctuation.The aforementioned three methods were compared and validated via the test results.The influence of the stress random fluctuation degree on the probability of MSD occurrence and influence of the distribution types on evaluating the MSD occurrence probability were discussed.     

ICF靶面均匀照明二元光学器件的设计与研制

 采用不同的优化算法,设计了ICF均匀照明二元光学器件。提出了全局/局部联合搜索算法(GLUSA),对平面输入波获得了旁瓣小、光强均匀的设计结果。完成了16阶浮雕表面结构的位相板的试制加工,并利用光学CT法测量了焦斑光强分布,实验结果表明获得了较好的光强包络,但顶部均匀性还有待进一步提高。将单元器件扩展为阵列器件,增加了对输入光波畸变的宽容度。     

用偏压限制器控制KT－5C托卡马克等离子体边缘电场的实验研究

在托卡马克ＫＴ－５Ｃ上，我们首次采用可灵活组合的多块限制器进行了施加偏压以控制等离子体边缘电场的实验，结果表明，在本装置上限制器加正偏压优于加负偏压，正偏压改变等离子体边缘电场效果更明显。偏压限制器收集面积、纵场和偏置电压的大小对偏压效果的影响都是敏感的。改变限制器收集面积和偏压导致的边缘电场的变化最终将趋于饱和，另外发现，偏压限制器与等离子体柱的相对位置对等离子体边缘电场的影响也是重要的。     

投影式头戴静脉显像光学系统的设计

为了辅助静脉穿刺及相关的医疗操作, 设计了一款基于投影式头戴显示器(HMPD)的静脉显像系统, 其光学系统由近红外成像系统和穿透型HMPD构成。利用光学设计软件ZEMAX优化设计近红外成像系统, 使其具有F/2.6的大数值孔径, 有利于弱反射红外光的收集成像。穿透型HMPD采用与近红外成像系统相同的光学结构, 有利于简化系统的加工装调。设计结果表明, 近红外成像系统成像质量优异, 分辨率达到QXGA(2 048×1 536)。穿透型HMPD具有18 mm的大出瞳直径及25 mm的大出瞳距离, 场曲小于0.03 D, 畸变小于0.32%, 达到QXGA分辨率显示模式。与现行的静脉显像系统相比, 本显像系统结构简单紧凑、佩戴舒适, 且具有超高分辨率, 是一款适用于辅助医疗的目视系统。     

脉冲氙灯放电过程分析与实验测定

脉冲氙灯是一种新型光源,利用量子理论以及气体放电理论分析了脉冲氙灯放电过程,设计了放电测试系统,实验测定了放电过程中的电压、电流和光脉冲信号。结果表明：在预电离阶段自由电子浓度较低,能量较低;气体放电阶段灯内形成电子崩,使得自由电子浓度的增大,放电电流迅速上升,电压下降;离子复合时释放出光子形成光脉冲,氙灯脉冲的光能量输出和光谱特性与复合电子能量、氙气复合能级相关,而当输入能量与氙灯的能耗不一致的时候,将导致充电电容反复充放电,而使电路产生振荡。对于分析脉冲氙灯放电过程,优化放电回路参数设计和脉冲氙灯的生产具有重要意义。     

水热法合成纳米晶NaYF4 : Er3+,Tm3+,Yb3+ 的上转换发光特性

以EDTA为络合剂,用水热法合成了Er³⁺,Tm³⁺和Yb³⁺共掺杂的NaYF₄纳米晶。XRD和TEM的结果表明:粒径约为30 nm,属于六方晶系。在980 nm半导体激光器激发下,研究了不同Er³⁺离子掺杂浓度对Tm³⁺和Er³⁺离子上转换发光性能的影响,光强与泵浦功率的双对数曲线表明,474,525,539,650 nm的发射均属于双光子过程,408 nm的发射属于三光子过程。讨论了样品的协作敏化和声子辅助共振能量传递的上转换发光机制。     

Theoretical Investigation of Femtosecond-Resolved Photoelectron Spectrum of NaI Molecules

The time-resolved photoelectron spectra （TRPES） of NaI molecules are calculated by using the time-dependent wave packet method. Two different potential energy curves （adiabatic and diabatic） are adopted in the simulation. The third peak of the photoelectron spectra presented in the adiabatic calculation is induced by the reflection of the wave packet. The oscillating of the wave packet onto the diabatic energy curve is a decreasing process. The comparison of the photoelectron spectra between the two different calculations （adiabatic and diabatic） is presented.     

RP-HPLC测定八角枫药材中的水杨苷

建立反相高效液相色谱法测定八角枫药材中水杨苷含量。采用Shim-pack vp-ODS C18(150mm×4.6mm,5μm),柱温为25℃;以乙腈-水(7∶93,V/V)为流动相,流速为1.0mL.min-1;检测波长为269nm。水杨苷在16.02—80.10μg.mL-1范围内线性关系良好,线性方程为y=5070.1x+4069.1,r=0.9994,平均回收率为99.53%,RSD=1.19%。该方法快速简单,可用于八角枫药材的质量控制。     

用双光束干涉制作二维光子晶体

利用双光束干涉,在光敏材料上制作光子晶体结构.通过改变两束光之间的夹角可以改变制备样品的周期.改变曝光次数以及两次曝光时干涉条纹的夹角可以分别得到一维、二维正方晶格以及二维三角晶格结构的光子晶体.