Spatial distribution of the intensity noise of a vertical-cavity surface-emitting semiconductor laser

We studied anticorrelated quantum fluctuations between the TEM(00) and the TEM(01) transverse modes of a vertical-cavity surface-emitting semiconductor laser by measuring the transverse spatial distribution of the laser beam intensity noise. Our experimental results are found to be in good agreement with the predictions of a phenomenological model that accounts for quantum correlations between transverse modes in a light beam.     

Superchirped moiré grating based on an acousto-optic superlattice with a chirped fiber Bragg grating

A superchirped moiré grating has multiple superimposed chirped Bragg gratings. We show that a superchirped moiré grating can be formed in an acousto-optic superlattice with a chirped fiber Bragg grating. There are multiple transmission peaks related to Fabry-Perot resonance in the transmission spectrum. The peak spacing is varied by the acoustic frequency. The proposed devices can be used as tunable multiple-passband transmission filters and switches.     

Experimental analysis of the electrode products emitted byhigh-current vacuum arcs

The mass distribution of particles produced in the high-current vacuum arc was investigated. The experiments were concentrated on evaluating the spatial mass distribution emitted in the radial as well as in the azimuthal directions calculated from the mass deposition profile on collectors surrounding the arc discharge. The experiments were carried out in a vacuum chamber evacuated to an ambient pressure <10^-4 Pa. High-current arcs in the range from 2-7.5 kA were drawn between butt contacts of 31 and 55 mm in diameter (anode and cathode, respectively) both of a copper-chromium alloy (CuCr25). The surface mass deposited along multi-segment collectors was measured by a micro densitometer, and an inductively coupled plasma (ICP) spectrometer. Two angular mass deposit distributions were determined: the azimuthal distribution on the plane parallel to the cathode surface, and the radial distribution as a function of the angle with respect to the cathode plane. Both distributions were anisotropic and the structure of the deposition layer depended on the angle of incidence of the particles onto the substrate, the density of the particle flux and other factors. The mass deposited on the collectors consisted mostly of chromium molecules (approx. 80% of Cr and 20% Cu) for CuCr25 or CuCr40 electrodes     

激光直写邻近效应的校正

邻近效应是限制光刻系统分辨力的一个重要因素,它也限制了激光直写在亚微米和亚半微米光刻中的应用。分析了激光直写邻近效应产生的原因,指出它和电子束直写及投影光刻的区别,提出了一种简便有效的邻近校正方法。实验表明,通过光学邻近校正（ＯＰＣ）,利用微米级激光直写系统,制作出了０．６μｍ的实用光刻线条     

参数不确定的分数阶混沌系统广义错位延时投影同步

为进一步增强通信系统中保密通信的安全性,结合广义错位投影同步和延时投影同步,提出了广义错位延时投影同步.以分数阶Chen系统和Lü系统为例,针对两系统参数都不确定,基于分数阶稳定性理论与自适应控制方法,设计了非线性控制器和参数自适应律,实现了广义错位延时同步,并辨识出驱动系统和响应系统中所有不确定参数.理论分析和数值仿真验证了该方法的可行性与有效性.     

从银电极上氢析出的温度效应得到的反应动力学启示

利用循环伏安法研究了多晶银电极在0.1 mol/L HClO₄溶液中氢析出反应的温度效应. 发现当从析氢起始电位负向扫描至零电荷电位(-0.4 V)时,氢析出反应的表观活化能(E_a,app)和指前因子(A)均随着电势的负移而增大(对应的E_a,app从24 kJ/mol增大至32 kJ/mol).继续负向扫描至零电荷电位以后,E_a,app随电势的负移而减小但A不随电势变化. 推测E_a,app和A在零     

无表面活性剂Pt和PtRu纳米粒子制备及其甲醇氧化活性

利用一种简单的方法制备不含任何表面活性剂并具有高甲醇氧化活性的Pt和PtRu纳米电催化剂. 以CO为还原剂, CO和多壁碳纳米管(MWCNT_s)为保护剂和载体,通过一步反应得到沉积在多壁碳纳米管上Pt纳米粒子,在制备过程中无需使用任何有机溶剂或表面活性剂. 利用循环伏安法和计时电流法表征了所合成催化剂的甲醇氧化活性,甲醇氧化的峰电位(ca. 0.9 V vs. RHE)处的电流密度和比质量电流高达11.6 mA/cm² 和860 mA/mg_Pt. 在Pt/MWCNT_s表面电沉积Ru后,催化剂在低电位处的甲醇氧化活性得到提高,其在0.5和0.6 V的稳态比质量电流分别达到了20和80 mA/mg.     

利用原位红外光谱与微分电化学质谱联用技术研究在Pt以及PtRu电极上发生的甲醇氧化反应

利用电化学衰减全反射原位傅里叶变换红外光谱与微分电化学质谱联用技术,在流动电解池环境以及恒电位条件下研究了Pt电极和Pt电极通过表面电沉积Ru形成的PtRu电极(Pt_xRu_y)上发生的甲醇氧化反应(反应电解质溶液为0.1 mol/L HClO₄+0.5 mol/L MeOH). 在0.3～0.6 V(参比电极为可逆氢参比)实验用到的所有电极上,CO是唯一能从红外光谱观察到的与甲醇相关的表面吸附物;在Pt_0.56Ru_0.44电极上可以观察到CO吸附在Ru原子形成的岛上和CO线式吸附在Pt电极表面红外波段,而其他电极上只能观察到Pt表面上线式吸附的CO;甲醇氧化活性按Pt_0.73Ru_0.27>Pt_0.56Ru_0.44>Pt_0.83Ru_0.17>Pt的顺序递减;在0.5 V 时,甲醇在Pt_0.73Ru_0.27电极上的氧化反应的CO₂电流效率达到了50%.     

硫和银共掺杂介孔TiO2的制备、表征及其对染料的光催化降解活性

以P123为模板,以钛酸四正丁酯、硝酸银和硫脲为原料采用模板法制备了一系列硫和银共掺杂介孔TiO₂光催化材料．利用SEM、XRD、BET和紫外-可见光谱等技术对其形貌、晶体结构及表面结构、光吸收特性等进行了表征．以甲基橙溶液的光催化降解为模型反应,考察了不同掺杂量的样品在紫外和可见光下的光催化性能．结果表明,用模板法制备的共掺杂介孔TiO₂光催化材料在紫外和可见光条件下较纯介孔TiO₂和单掺杂介孔TiO₂对甲基橙溶液具有更好的光催化降解效果, 且硫和银的掺杂量及样品焙烧温度显著影响该材料的催化性能．当硫掺杂量为2mol%和银掺杂量为1mol%,在500 oC 焙烧2 h所得光催化材料的催化性能最佳,4 h即可使甲基橙的降解率达98.8%,重复使用4次仍可使甲基橙的降解率保持在87.5%以上     

铒镱共掺光纤放大器的高温老化输出功率

对1550 nm铒镱共掺光纤放大器不同温度下的输出功率以及经过高温老化后的输出功率和光谱进行了实验研究.通过对比高温和常温下铒镱共掺光纤放大器的输出功率随泵浦功率的变化曲线,得出铒镱共掺光纤放大器在高温环境工作可提高输出功率,且不同长度的增益光纤对温度的敏感性不同的结论.以Arrhenius模型为加速老化模型对增益光纤...