Alkylation de l'acetylacetate de methyle par le α(p-nitrophenyl)-ethanol chiral par deshydratation intermoleculaire

Mitsunobu's method of acetoacetic ester alkylation by $\text{p}$-nitrophenyl-ethanol avoid the S_RN1 reaction and is well appropriate for the correlation of absolute configuration and $\text{ee}$ of the O and C alkylation products.     

Synchronization of signal sampling with liquid pulsation in systems with peristaltic pumps

Method and electronic circuitry are described for synchronization of analytical signal sampling with pulsation of liquid flow in systems with a peristaltic pump. The technique is illustrated for cathodic stripping voltammetry of manganese.     

Untersuchungen an einigen Einkristallen des Systems CuxHg1–xCr2Se4

Study of Some Single Crystals of the Cu_xHg_1–xCr₂Se₄ System Single crystals of the Cu_xHg_1–xCr₂Se₄ for 0 ≤ x ≤ 0.077 were prepared by the chemical transport method. The crystals were analyzed and investigated by X-rays. Some electric and magnetic properties of the single crystals were determined and the results obtained are discussed.     

Maßanalytische Bestimmung von Merkapto-Benzthiazol im Wärmeaustauscher eines Reaktors

Zusammenfassung Eine volumetrische Methode zur Bestimmung geringer Mengen Merkapto-Benzthiazol in der Kühlflüssigkeit von Reaktoren wurde ausgearbeitet. Es wird in ammoniakalischem Medium mit ammoniakalisehem Silbernitrat titriert. Das Merkapto-Benzthiazol bildet mit Silberionen einen weißen, flockigen Niederschlag. Der Endpunkt der Titration wird mit Hilfe der Dead-stop-Indikation bestimmt. Er wird durch eine sprunghafte Stromstärkeerhöhung (Pt-Pt-Elektrode, 500 mV und 10^–7 A Empfindlichkeit des Galvanometers) angezeigt. Die Methode wird durch Triäthanolamin, Glykol, geringe Mengen von Chlorid und Phosphat nicht gestört.

---

Summary A volumetric method has been developed for determining slight amounts of mercapto-benzthiazol in the cooling liquid of reactors. It is titrated in ammoniacal medium with ammoniacal silver nitrate. The mercapto-benzthiazol yields a colorless flocculent precipitate with silver ions. The endpoint of the titration is found by the dead stop indication. It is signalled by a sudden jump in the current strength (Pt-Pt-electrode, 500 mV and 10^–7 amp sensitivity of the galvanometer). The method is not impaired by triethanolamine, glycol, slight amounts of chloride, nor by phosphate.

---

Résumé On a mis au point une méthode volumétrique pour le dosage de faibles quantités de mercaptobenzothiazole dans le liquide de refroidissement des réacteurs. On titre en milieu ammoniacal par le nitrate d'argent ammoniacal. Le mercaptobenzothiazole forme un précipité blanc, floconneux avec les ions argent. On détermine le point d'équivalence du titrage par la méthode du «dead stop end point». Il se trouve signalé par une augmentation brusque de l'intensité (électrodes Pt-Pt, 500 mv et 10^–7 A de sensibilité du galvanomètre). La triéthanolamine, le glycol, de petites quantités de chlorures et de phosphates, ne gênent pas.

---

---

Vorgetragen beim Symposium für analytische Chemie in Graz, 29. September bis 1. Oktober 1965.     

Spectrophotometric determination of ruthenium after extraction of perruthenate with benzyltributylammonium chloride

A simple and convenient extractive spectrophotometric method for the determination of ruthenium has been developed. It is based on the oxidation of the different ruthenium (II, III or IV) species to perruthenate with potassium periodate at pH 7.8. The perruthenate is then extracted with benzyltributylammonium chloride in chloroform followed by direct spectrophotometric measurements at 342 and 380 nm. The optimum concentration range was found to be 0.1–5 mg l^–1, the standard deviation ±2.1%. The method has been successfully applied to the determination of ruthenium in organoruthenium compounds.     

HPLC-Electrochemical detection with graphite-poly (tetrafluoroethylene) electrode Determination of the fungicides thiram and disulfiram

The suitability of composite graphite-poly(tetrafluoroethylene) (Teflon) electrodes as amperometric indicator electrodes in HPLC detection is demonstrated. The determination of the fungicides thiram and disulfiram in the presence of ziram has been chosen as an analytical problem. The optimization of working conditions, such as the choice of the organic solvent used in the mobile phase as well as its percentage, the potential applied to the composite electrode, and the time elapsed between mixing the carbamates and the injection, has been accomplished by using the wall-jet flow-cell configuration. The effect of the acetonitrile percentage used in the mobile phase on the retention of thiram, disulfiram, ziram and phenol was evaluated. Resolution up to the baseline can be achieved with 45% acetonitrile. The sensitivity of the determination of thiram and disulfiram in the presence of a constant concentration of ziram is slightly better when using a wall-jet cell; however, the background current is higher, as well as the baseline noise and the time necessary to achieve stabilization of the baseline before the injection. Lower limits of detection for both fungicides, as well as a better repeatability, were obtained when using a thin-layer flow cell configuration. As an application, the determination of thiram in spiked apple samples, at a level of 0.5 mg thiram kg(-1) apple, has been carried out with a mean recovery of 97 +/- 3% for a significance level of 0.05.     

Porphyrin acids

The structural change from the porphyrin free base to monoacid and diacid by successive protonation has been studied by the IR, visible and NMR spectroscopy. The results have indicated that the cation and anion of the porphyrin diacid are strongly associated through H-bonding. The far IR spectra show especially marked differences in the free base, monoacid, and diacid due to the changes of the inner core of the porphyrin ring.     

Über Reaktionen von Nitrosophenolen, 4. Mitt.: Reaktion von Nitrosonaphtholen mit Naphtholen

Zusammenfassung Die Reaktion von 1-Nitroso-2-naphthol mit 1-und 2-Naphthol sowie die Reaktion von 2-Nitroso-1-naphthol mit 2-Naphthol in Äthanol und in Äther bei Anwesenheit von HNO₃ gibt 5H-Dibenzo[a,j]phenoxazon-(5) (I), 5H-Dibenzo[a,j]phenoxazon-(5)-14-oxid (II), 5H-Dibenzo[a,h]phenoxazon-(5) (III) sowie 5H-Dibenzo[a,h]phenoxazon-(5)-14-oxid (IV). Es wurde ein Reaktionsmechanismus vorgeschlagen und die Konstitution der hergestellten Verbindungen spektrophotometrisch und potentiometrisch bestimmt.

---

The reaction of 1-nitroso-2-naphthol with 2-and 2-naphthol and the reaction of 2-nitroso-1-naphthol with 2-naphthol in ethanol or ether in the presence of nitric acid have been studied. The main reaction products isolated were the dibenzophenoxazones I–IV. The reaction mechanism for their formation is proposed.

---

---

Mit 4 Abbildungen     

The effect of mechanical activation on the thermal decomposition of chalcopyrite

Experimental results on the influence of preliminary mechanical activation on the thermal decomposition of chalcopyrite are presented and discussed. The following experimental facts were found: