Adsorption of Ethoxylated Alkyl Phenols on Silica Gel from Aqueous Micellar Solutions

Adsorption of ethoxylated nonylphenols (Neonols) from their micellar solutions on coarse-pore KSK silica gel was studied under static conditions. The energy of adsorption interaction between micelles and silica gel surface was determined using the Hill–de Boer isotherm. For the initial parts of the isotherms (from 1 to 6 CMC₁), it was equal to –15.8kT. The study of coadsorption of Neonols with dye methylene blue showed that the micellar adsorption layer is fragmentary and that the amount of the adsorbed surfactant is dependent on the conditions of the adsorption layer formation.     

Preparation of56Mn-labelled sand: A radiotracer for phocess industry oriented powder mixing studies

A method for the preparation of a radioactive tracer for sand,⁵⁶Mn-labelled sand, using NH₄MnF₃ as the label carrier was developed. The labelling process is based on the adsorption of the label carrier onto the sand particles.     

Spectrophotometric determination of microamounts of scandium with o-chlorophenylfluorone and cetyltrimethylammonium bromide

The reaction of scandium(III) with o-chlorophenylfluorone (o-CIPF) in the presence of cetyltrimethylammonium bromide (CTMAB) has been studied. In an acetate buffer at pH 4.4, a red-purple complex is obtained, with maximum absorption at 569 nm and a molar absorptivity of 1.31 x 10(5)1.mole(-1).cm(-1). The composition of the complex is found to be 1:2:2 Sc-o-CIPF-CTMAB. Beer's law is obeyed over the range 0-12 mug/25 ml scandium. The proposed method has been used for determination of trace scandium in tungsten ores after its prior separation by solvent extraction.     

Pt-Sn脱氢催化剂浸渍状态的Sn-119和Pt-195的多核NMR研究

测定了Ｐｔ－Ｓｎ型催化剂浸渍状态下的Ｓｎ－１１９、Ｐｔ－１９５的多核核磁共振。当ＳｎＣｌ２／ＤＣｌ溶液体系中加入Ｈ２ＰｔＣｌ６以后，出现了Ｓｎ（Ⅳ）和另外一种Ｓｎ（Ⅱ）的构型，Ｓｎ－１１９峰向高场位移，说明部分Ｓｎ（Ⅱ）被氧化成Ｓｎ（Ⅳ），Ｈ２ＰｔＣｌ６的量对这种氧化性影响较小。而Ｈ２ＰｔＣｌ６／Ｄ２Ｏ溶液体系中加入ＳｎＣｌ２以后部分Ｐｔ（Ⅳ）被还原成Ｐｔ（Ⅱ），随着ＳｎＣｌ２量的增加，Ｐｔ（Ⅱ）     

Barium dichromate [BaCr2O7], a mild reagent for oxidation of alcohols to their corresponding carbonyls in non-aqueous polar aprotic media

Barium dichromate is used as a mild oxidizing agent for the selective conversion of primary and secondary alcohols to their corresponding aldehydes and ketones, respectively. Over-oxidation does not occur and primary alcohols undergo oxidation to the aldehyde. Primary and secondary benzylic alcohols are oxidized faster and more efficiently.     

Sensitive high-performance liquid chromatography/mass spectrometry method for determination of steviol in rat plasma

The main toxicological concern of stevioside, a highly potent sweetener from S. rebaudiana, is its main metabolite, steviol. To determine very low levels of steviol in in vivo experiments, a sensitive liquid chromatography/atmospheric pressure chemical ionization mass spectrometry (LC/APCI-MS) method was developed for quantifying steviol in rat plasma after oral administration of a single dose of stevioside (0.5 g/kg). The sample preparation uses liquid-liquid extraction with tert-butyl methyl ether in an acidic environment. The retention time of steviol was 10.5 min. The assay was linear over the range 2-1000 ng/mL with a lower limit of detection of 1 ng/mL. The intra- and inter-day precision were <5 and <7%, respectively, and the accuracy was in the range 95-108%. The steviol concentration profile in rat plasma was determined.     

Synthesis of14C-propoxur (o-isopropoxyphenyl N-methylcarbamate-14C) insecticide

Propoxur (Baygon^®) is an insecticide with a broad spectrum of activity and a very low order of mammalian toxicity. Radiosynthesis of propoxur was performed by the reaction of acetyl-1¹⁴C chloride and sodium azide to produce methyl isocyanate which then reacted with o-isopropoxyphenol at 100°C. A two compartment reaction tube with a break seal was utilized. Chromatographic procedures for isolating the N-methylcarbamates from their reaction mixtures are reported. Acetyl-1–¹⁴C chloride was prepared from thionyl chloride and sodium acetate-1–¹⁴C. Grignard reaction between methyl iodide and carbon –14 dioxide yielded acetic acid –¹⁴C which was neutralized by sodium hydroxide solution to give sodium acetate 1-¹⁴C.     

Diamond synthesis by DC thermal plasma CVD at 1 atm

Diamond crystals and films have been success full y synthesized by DC thermal plasma jet CVD at a pressure of I atrn. A novel triple torch plasma reactor has been used to generate a convergent plasma volume to entrain the participating gases. Three coalescing plasma jets produces! by this reactor direct the dissociated and ionized gaseous species onto ( 100) silicon wafer substrates where the diamond grows. In a typical 10-min run, depending on the method of .substrate preparation, either microcrystals with sizes up to 8 m or continuous films with thicknesses of 1–2 m have been obtained. X-ray diffraction, scanning electron microscopy, and Raman spectroscopy have been used for the characterization of the crystals and of the films.     

Asymmetric dimers can be formed by dewetting half-shells of gold deposited on the surfaces of spherical oxide colloids

Asymmetric dimers consisting of gold microcrystals and spherical silica colloids have been fabricated by depositing thin films of gold onto the spherical colloids to form half-shells, followed by annealing at elevated temperatures. The capability and feasibility of this procedure have been demonstrated with silica and titania beads of 0.2-2 mum in diameter and gamma-Fe2O3/polystyrene@SiO2 core-shell particles 0.5 mum in size. The dimensions of gold microcrystals could be conveniently varied in the range of 100-650 nm by controlling the thickness of gold films and/or the diameter of the spherical colloids. This method provides another route to asymmetric dimers made of colloidal particles that could be different in size, chemical composition, surface functionality, density or sign of surface charge, bulk property, or a combination of these properties.     

Maximum spectrum of continuous wavelet transform and its application in resolving an overlapped signal

To estimate the number of peaks and to find the individual peak positions in an overlapped signal, a new method called maximum spectrum of continuous wavelet transform (MSCWT) was developed by extracting the maximum coefficients of continuous wavelet transform (CWT). The peak position in MSCWT was the same as that in its original signal. In this process, CWT was performed not on a single dilation but on an appreciation dilation range. To obtain such a range, a new criterion was introduced to choose a center dilation, which was used to form the dilation range. If Cdilation denoted the center dilation, the proper dilation range was [Cdilation -6 +/- 2, Cdilation +1 +/- 1]. The Mexican Hat function was an analytical wavelet. Utilizing the information of the peak number and the position detected by MSCWT, a fitting route was performed to recover the original signal. One simulated and four true overlapped signals, including high performance liquid chromatography (HPLC), ultraviolet-visible (UV) spectrum, and differential pulse voltammetric (DPV), were processed, and the results indicated that MSCWT could detect an overlapped peak number and position, and the curve fitting based on information of MSCWT had a higher accuracy. The proposed method was an efficient one in resolving different types of overlapped signals.