Molecular-programmed self-assembly of homo- and heterometallic penta- and hexanuclear coordination compounds: synthesis, crystal structures, and magnetic properties of ladder-type CuII2MIIx (M=Cu, Ni; x=3, 4) oxamato complexes with CuII2 metallacyclophane cores

New homo- and heterometallic, hexa- and pentanuclear complexes of formula {[Cu2(mpba)2(H2O)F][Cu(Me5dien)]4}(PF6)(3).5H2O (1), {[Cu2(Me3mpba)2(H2O)2][Cu(Me5dien)]4}(ClO4)(4).12H2O (2), {[Cu2(ppba)2][Cu(Me5dien)]4}(ClO4)4 (3), and [Ni(cyclam)]{[Cu2(mpba)2][Ni(cyclam)]3}(ClO4)(4).6H2O (4) [mpba=1,3-phenylenebis(oxamate), Me3mpba=2,4,6-trimethyl-1,3-phenylenebis(oxamate), ppba=1,4-phenylenebis(oxamate), Me5dien=N,N,N'N' ',N' '-pentamethyldiethylenetriamine, and cyclam=1,4,8,11-tetraazacyclotetradecane] have been synthesized through the use of the "complex-as-ligand/complex-as-metal" strategy. The structures of 1-3 consist of cationic CuII6 entities with an overall [2x2] ladder-type architecture which is made up of two oxamato-bridged CuII3 linear units connected through two m- or p-phenylenediamidate bridges between the two central copper atoms to give a binuclear metallacyclic core of the cyclophane-type. Complex 4 consists of cationic CuII2NiII3 entities with an incomplete [2x2] ladder-type architecture which is made up of oxamato-bridged CuIINiII and CuIINiII2 linear units connected through two m-phenylenediamidate bridges between the two copper atoms to give a binuclear metallacyclophane core. The magnetic properties of 1-3 and 4 have been interpreted according to their distinct "dimer-of-trimers" and "dimer-plus-trimer" structures, respectively, (H=-J(S1A.S3A+S1A.S4A+S2B.S5B+S2B.S6B)-J'S1A.S2B). Complexes 1-4 exhibit moderate to strong antiferromagnetic coupling through the oxamate bridges (-JCu-Cu=81.3-105.9 cm-1; -JCu-Ni=111.6 cm-1) in the trinuclear and/or binuclear units. Within the binuclear metallacyclophane core, a weak to moderate ferromagnetic coupling (J'Cu-Cu=1.7-9.0 cm-1) operates through the double m-phenylenediamidate bridge, while a strong antiferromagnetic coupling (J'Cu-Cu=-120.6 cm-1) is mediated by the double p-phenylenediamidate bridge.     

Surface and Structural Investigation of a MnOx Birnessite‐Type Water Oxidation Catalyst Formed under Photocatalytic Conditions

Catalytically active MnO_x species have been reported to form in situ from various Mn‐complexes during electrocatalytic and solution‐based water oxidation when employing cerium(IV) ammonium ammonium nitrate (CAN) oxidant as a sacrificial reagent. The full structural characterization of these oxides may be complicated by the presence of support material and lack of a pure bulk phase. For the first time, we show that highly active MnO_x catalysts form without supports in situ under photocatalytic conditions. Our most active ⁴MnO_x catalyst (～0.84 mmol O₂ mol Mn^?1 s^?1) forms from a Mn₄O₄ bearing a metal–organic framework. ⁴MnO_x is characterized by pair distribution function analysis (PDF), Raman spectroscopy, and HR‐TEM as a disordered, layered Mn‐oxide with high surface area (216 m²g^?1) and small regions of crystallinity and layer flexibility. In contrast, the ^SMnO_x formed from Mn²⁺ salt gives an amorphous species of lower surface area (80 m²g^?1) and lower activity (～0.15 mmol O₂ mol Mn^?1 s^?1). We compare these catalysts to crystalline hexagonal birnessite, which activates under the same conditions. Full deconvolution of the XPS Mn2p_3/2 core levels detects enriched Mn³⁺ and Mn²⁺ content on the surfaces, which indicates possible disproportionation/comproportionation surface equilibria.     

Homoleptic Zincate‐Promoted Room‐Temperature Halogen–Metal Exchange of Bromopyridines

Homoleptic lithium tri‐ and tetraalkyl zincates were reacted with a set of bromopyridines. Efficient and chemoselective bromine–metal exchanges were realized at room temperature with a substoichiometric amount of nBu₄ZnLi₂?TMEDA reagent (1/3 equiv; TMEDA=N,N,N′,N′‐tetramethylethylenediamine). This reactivity contrasted with that of tBu₄ZnLi₂?TMEDA, which was inefficient below one equivalent. DFT calculations allowed us to rationalize the formation of N???Li stabilized polypyridyl zincates in the reaction. The one‐pot difunctionalization of dibromopyridines was also realized using the reagent stoichiometrically. The direct creation of C? Zn bonds in bromopyridines enabled us to perform efficient Negishi‐type cross‐couplings.     

Development and validation of a sensitive and selective method using GC/MS-MS for quantification of 5-fluorouracil in hospital wastewater

Pollution of the environment by pharmaceuticals is a subject of growing scientific and societal concern. However, few quantitative data have been reported concerning hospital wastewater contamination. Among the different molecules used at hospital, antineoplastic drugs appear to be of special interest, and 5-fluorouracil (5-FU) can be considered as a key compound of this therapeutic class. To monitor this pharmaceutical in hospital wastewater, a highly specific and selective method was developed using gas chromatography tandem mass spectrometry after solid-phase extraction. This sensitive method (limit of quantification = 40 ng L⁻¹) was then applied to assess sewage contamination of a middle-size hospital with oncology service located in Paris, France. Native 5-FU was detectable in 12 of the 14 analysed samples. In positive samples, concentration range was measured from 0.09 to 4.0 μg L⁻¹. Finally, a predicting model for the hospital wastewater concentrations is presented, and results of this model are discussed.     

Insight into the reactivity of olefins in the Pauson-Khand reaction

The reactivity of different Co(2)(CO)(6)-acetylene complexes in the Pauson-Khand reaction is strongly dependent on the nature of the olefin. Theoretical calculations at both the DFT and ONIOM levels are concordant with experimental observations and suggest how the olefin-cobalt interactions in the complex could have a major effect on the relative reactivity of the olefins. This study rationalizes for the first time the experimentally observed reactivity differences of cyclohexene, cyclopentene, and norbornene.     

An operando DRIFTS investigation into the resistance against CO2 poisoning of a Rh/alumina catalyst during toluene hydrogenation

CO(2) is a major contaminant of renewable H(2) derived from biomass fermentation. The effect of the presence of CO(2) on the activity of alumina-supported Pt and Rh catalysts used for the hydrogenation of toluene at 348 K was investigated. The use of operando diffuse reflectance spectroscopy (DRIFTS) was crucial in unravelling the changes in the nature and abundance of species adsorbed at the sample surface and relating those to the changes of catalytic activity. Rhodium supported on alumina was only partly deactivated by the introduction of CO(2) during the hydrogenation of toluene, contrary to the case of Pt/alumina. Rh was only partially covered by carbonyl species derived from CO(2) and it was shown that toluene could successfully compete with some of the linearly adsorbed carbonyls for adsorption. The alumina support stored many CO(2)-derived adsorbates (carbonates, hydrogenocarbonates, carboxylates) that could spill over to the metal and form carbonyl species even after the removal of CO(2) from the feed.     

Rearrangement of 4-(1-haloalkyl)- and 4-(2-haloalkyl)-2-azetidinones into methyl omega-alkylaminopentenoates via transient aziridines and azetidines

The synthesis of 4-(1-haloalkyl)-2-azetidinones and 4-(2-haloalkyl)-2-azetidinones was investigated with use of the Staudinger reaction between in situ generated ketenes and alpha-haloimines or beta-haloimines. This new class of functionalized 2-azetidinones was further evaluated for its potential use as intermediates in the synthesis of highly functionalized compounds. The reaction of 4-(1-haloalkyl)-2-azetidinones and 4-(2-haloalkyl)-2-azetidinones with sodium methoxide in methanol yielded ring-opened products, i.e., methyl 2-alkoxy-4-(alkylamino)pentenoate and methyl 5-(alkylamino)pentenoate, respectively. Further attention was paid in detail to the reaction mechanism involved in this peculiar transformation. It was proven that these reactions proceeded via intermediate aziridines or azetidines.     

Detection of genetically modified corn (Bt176) in spiked cow blood samples by polymerase chain reaction and immunoassay methods

The fate of DNA and protein transgenic sequences in products derived from animals fed transgenic crops has recently raised public interest. Sensitive molecular tests targeting the Bt176 genetic construct and the transgenic Cry1Ab protein were developed to determine whether plant sequences, especially transgenic sequences, are present in animal products. A protocol for total DNA extraction and purification from cow whole blood samples was first drawn up and assessed by spiking with known amounts of DNA from Bt176 maize. The limit of detection for transgenic sequences (35S promoter and Bt176-specific junction sequence) was determined by both the polymerase chain reaction-enzyme-linked immunosorbent assay (PCR-ELISA) and the 5'-nuclease PCR assay. Four additional PCR systems were built to substantiate the results. The first detects a mono-copy maize-specific sequence (ADH promoter). Two others target multi-copy sequences from plant nucleus (26S rRNA gene) and chloroplast (psaB gene). The last one, used as a positive control, targets a mono-copy animal sequence (alpha(s1)-casein gene). Both methods detected a minimum spiking at 25 copies of Bt176 maize/mL in 10 mL whole blood samples. The sandwich ELISA kit used detected down to 1 ng transgenic Cry1Ab protein/mL spiked whole blood.