Removal and regeneration of aqueous divalent cations by boehmite

Boehmite (Al(OH)O) was employed for the removal of aqueous Mg(2+), Cu(2+), Cd(2+), Pb(2+), and Co(2+) at 298 K. Although boehmite was able to remove these divalent cations, the greater removal rate with boehmite of Pb(2+) (28.7%) than with Mg(2+), Cu(2+), Cd(2+), and Co(2+) (5.6, 25.3, 10.9, and 13.3%, respectively) was observed under acidic conditions. Under stronger alkaline conditions, in which the lead species was completely dissolved, a greater removal rate of Pb(2+) (more than 80%) was observed under the corresponding conditions employed for the acidic conditions. The removed lead species could not be dissolved from boehmite in an acidic solution while an evident dissolution of lead species was detected using an aqueous NaOH solution. The results shown in the present study reveal that boehmite can be employed as a reagent for the removal and regeneration of aqueous metal cations.     

Stereospecific Oxycyanation of Alkenes with Sulfonyl Cyanide

Oxycyanation of alkenes would allow the direct construction of useful β-hydroxy nitrile scaffolds. However, only limited examples of such reactions have been reported, and some problems including limited substrate scope and the lack of diastereocontrol in the case of the oxycyanation of internal alkenes have arisen. We herein report on the intermolecular oxycyanation of alkenes using p-toluenesulfonyl cyanide (TsCN) in the presence of tris(pentafluorophenyl)borane (B(C₆F₅)₃) as a catalyst, affording products that contain a sulfinyloxy group and a cyano group at the vicinal position. The reaction features a stereospecific syn-addition. The reaction also shows a broad substrate scope with good functional group tolerance. Mechanistic investigations by experimental studies and density functional theory (DFT) calculations revealed that the reaction proceeds via an unprecedented stereospecific mechanism through the electrophilic cyanation of alkenes, in which B(C₆F₅)₃ efficiently activates TsCN through the coordination of the cyano group to the boron center.     

In situ and real-time visualisation of oxygen distribution in DMFC using a porphyrin dye compound

A luminescent porphyrin dye film has been coated onto a transparent separator on the cathode side of a direct methanol fuel cell (DMFC) to visualise clearly oxygen distribution under operating conditions by analysing emission from the dye.     

Determination and purification of sesamin and sesamolin in sesame seed oil unsaponified matter using reversed‐phase liquid chromatography coupled with photodiode array and tandem mass spectrometry and high‐speed countercurrent chromatography

In Asian countries, sesame seed oil unsaponified matter is used as a natural food additive due to its associated antioxidant effects. We determined and purified the primary lignans sesamin and sesamolin in sesame seed oil unsaponified matter using reversed‐phase liquid chromatography coupled with photodiode array and tandem mass spectrometry and high‐speed countercurrent chromatography. Calibration curves showed good correlation coefficients (r² > 0.999, range 0.08 and/or 0.15 to 5 μg/mL) with a limit of detection (at 290 nm) of 0.02 μg/mL for sesamin and 0.04 μg/mL for sesamolin. Sesame seed oil unsaponified matter contained 2.82% sesamin and 2.54% sesamolin, respectively. Direct qualitative analysis of sesamin and sesamolin was achieved using quadrupole mass spectrometry with positive‐mode electrospray ionization. Pure (>99%) sesamin and sesamolin standards were obtained using high‐speed countercurrent chromatographic purification (hexane/ethyl acetate/methanol/water; 7:3:7:3). An effective method for determining and purifying sesamin and sesamolin from sesame seed oil unsaponified matter was developed by combining these separation techniques for standardized food additives.     

Palladium(II)-catalyzed carboxylation of benzene and other aromatic compounds with carbon monoxide under very mild conditions

Aromatic compounds such as benzene, toluene, chlorobenzene, anisole, and naphthalene were carboxylated by palladium(II) acetate catalyst with carbon monoxide in the presence of potassium peroxodisulfate in trifluoroacetic acid (TFA) at room temperature under atmospheric pressure. The aromatic carboxylic acids were formed in good yields; for example, the carboxylation of benzene with carbon monoxide proceeds quantitatively under the optimal conditions.     

Stereochemistry of the free‐radical polymerization of zinc methacrylates coordinated with a bidentate ligand

The polymerization of zinc methacrylates coordinated with a bidentate ligand ( 1 – 4 ) was carried out in chloroform at 60°C. The polymerization of these monomers gave chloroform‐insoluble polymers. Stereoregularity of the polymers was estimated from ¹H NMR spectra of poly(methyl methacrylate)s (PMMAs) derived from the original polymers. Monomers 1 and 2 gave slightly different polymers compared with conventional ones obtained by polymerization of methacrylic acid, while 3 afforded higher amounts of isotactic polymers than 1 and 2 . Conversely, 4 gave a polymer of high syndiotacticity. Furthermore, the relationship between triad tacticity and monomer concentration in the feed was studied. Consequently, it was demonstrated that the structure of bidentate ligands coordinated with zinc ion influences the stereoregularity of the resulting polymers.     

Mg/K2S2O8‐promoted direct carboxylation of saturated hydrocarbons with CO

Saturated hydrocarbons react with carbon monoxide in the presence of magnesium powder and potassium peroxodisulfate in trifluoroacetic acid (TFA) to afford the corresponding carboxylic acids as major products and alkyl trifluoroacetates as minor products in high yields. The use of equimolar amounts of magnesium (5 mmol) and K₂S₂O₈(5 mmol) is best for this reaction. Cyclohexane is carboxylated most effectively at 80 °C for 30 h using 50 atm CO, 3 ml of TFA and 1 mmol of cyclohexane, giving 80% conversion (95% conversion yield) based on cyclohexane. The reactivity of various saturated hydrocarbons has been determined by competitive reactions of equimolar amounts of cyclohexane (5 mmol) and another hydrocarbon (5 mmol). The order of decreasing reactivity obtained is cycloheptane > cyclohexane > cyclopentane > n‐propane > methane. Copyright ­© 1999 John Wiley & Sons, Ltd.     

High-performance optics for thermal microscopy

We have developed a thermal microscope which has an InSb detector and optics optimized for the camera. Using this system, we evaluated maximum resolution of a 30×/numerical aperture 0.71 lens made of silicon and germanium, and achieved the cutoff frequency of around 300 line pairs/mm, which is almost a diffraction-limited performance. The thermal microscope is installed on the THEMOS-1000, a product of Hamamatsu Photonics, for thermal emission analysis.