Development of a chemical vapor sensor using piezoelectric quartz crystals with coated unusual lipids

Piezoelectric quartz crystal sensors were developed using lipids with various properties for highly sensitive detection of chemical vapors. Lipids with varying lengths of alkyl chains were coated onto 10 MHz AT-cut quartz crystal resonators and the response of these modified crystals to chemical vapors were measured. It was shown that hydrophilic compounds, such as ethanol and methanol, could be recognized efficiently by lipids having shorter alkyl chains, whereas lipids with longer alkyl chains showed affinity to more hydrophobic vapors, such as toluene, hexane and cyclohexane. Frequency changes caused by adsorption of alcohols could be enhanced when cholesterol was co-immobilized in the lipid layer. To confirm the assumption that the sensor-response might be affected by the properties of lipids derived from acyl chains, we have examined the effects of two types of newly synthesized unusual lipids on sensor response. When lipids having one triple bond each at different positions on their alkyl chains were coated onto quartz crystals separately, lower responses were observed compared to responses obtained for a sensor with immobilized, saturated phosphatidylcholine. Lipids containing -branched acyl chains, however, showed good affinity for organic vapors, and sensor responses improved 4–5-fold. Moreover, these sensors were shown to have sensitivity of the same order as the humans' sense of smell (10⁻⁵–10⁻⁶ w/w in liquid paraffin) when measured using standard odorants (isovaleric acid, skatole, etc.) for an olfactometry established in Japan.     

Detection sensitivity of time interval analysis for the determination of α-radionuclides with millisecond order lifetimes

A selective extraction of the correlated events due to three kinds of short-lived -decay events,²¹⁶Po (145 ms),²¹⁷At (32.3 ms) and²¹⁵Po (1.78 ms), from other random background events were examined by using a time interval analysis (TIA) from the viewpoint of detection sensitivity. In the theoretical treatment based on the probability and statistics, it was clarified that the detection sensitivity proportionally increased with shortening half-lives in the following order,²¹⁵Po>²¹⁷At>²¹⁶Po. In the experiments, pulses from a liquid scintillator owing to -decay events were analyzed using a multiple TIA technique and resulted in the highest sensitivity of²¹⁹Rn–²¹⁵Po pairs in the actinium series. Thus, the multiple TIA method was applied to the practical determination of²¹⁹Rn–²¹⁵Po pairs in natural samples.     

Iron‐catalyzed living radical polymerization of acrylates: Iodide‐based initiating systems and block and random copolymerizations

A half‐metallocene iron iodide complex [Fe(Cp)I(CO)₂] induced living radical polymerization of methyl acrylate (MA) in conjunction with an iodide initiator [(CH₃)₂C(CO₂Et)I, 1 ] and Al(Oi‐Pr)₃ to give polymers of controlled molecular weights and narrow molecular weight distributions (MWDs) (M_w/M_n < 1.2). With the use of chloride and bromide initiators, the MWDs were broader, whereas the molecular weights were similarly controlled. Other acrylates such as n‐butyl acrylate (nBA) and tert‐butyl acrylate (tBA) can be polymerized with 1 /Fe(Cp)I(CO)₂ in the presence of Ti(Oi‐Pr)₄ and Al(Oi‐Pr)₃, respectively, to give living polymers. The 1 /Fe(Cp)I(CO)₂ initiating system is applicable for the synthesis of block and random copolymers of acrylates (MA, nBA, and tBA) and styrene of controlled molecular weights and narrow MWDs (M_w/M_n = 1.2–1.3). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2033–2043, 2002     

Assembled structures of nanocrystals in polymer/calcium carbonate thin-film composites formed by the cooperation of chitosan and poly(aspartate)

Assembled structures of calcium carbonate (CaCO₃) nanocrystals have been examined for polymer/CaCO₃ thin-film composites synthesized through a self-organization process inspired by biomineralization. For the crystallization of CaCO₃, a thin-film matrix of chitosan has been used as a polymeric substrate. When the matrix is immersed into a supersaturated aqueous solution of CaCO₃ containing 1.4 × 10⁻³ wt % poly(aspartate) (PAsp), thin-film crystals of CaCO₃ are formed spontaneously. Three kinds of disklike films have been observed under a polarizing optical microscope. Electron diffraction analyses of each film have revealed that one is aragonite, displaying radial orientation of the c axes, and the others are vaterite, exhibiting different orientations. Detailed observation by scanning electron microscopy has clarified that these films are assemblies of crystalline particles 10–20 nm in size. The thin-film composites have been obtained over a PAsp concentration range of 4.4 × 10⁻⁴ to 1.0 × 10⁻² wt %. Vaterite formation becomes dominant when the concentration of PAsp is increased. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5153–5160, 2006     

The resonant secondary emission of the F center in alkali halides

The secondary radiation after resonant excitation of F center and its linear polarization P correlated to the polarization of resonant light have been measured for five alkali halides at low temperatures. In KC1, the spectrum of P over the whole Stokes region is divided into three successive regions, the depolarization range at the one-phonon Raman scattering, the near plateau range, and the depolarization range down to vanishing. The former two have common relevance to resonant energy and symmetries of coupled phonons. These relevances are interpreted adopting a configuration coordinate model for 2s- and 2p-like excited states.     

Synthesis and Reactions of 1-Phenylbenzo[b]thiophenium Salts

1-Phenylbenzo[b]thiophenium salts are prepared and reacted under thermal and photochemical conditions. The chemical behaviors are discussed.     

Deprotection of dithioacetals with 30% hydrogen peroxide catalyzed by tantalum(V) chloride–sodium iodide or niobium(V) chloride–sodium iodide

The reaction of dithioacetals with 30% hydrogen peroxide in the presence of catalytic amounts of tantalum(V) and iodide ion effectively produced carbonyl compounds in high yields. Dithioacetals also can be deprotected using the niobium(V) catalyzed oxidation of iodide ion by hydrogen peroxide under mild conditions.     

Complete Photochromic Structural Changes in Ruthenium(II)?Diimine Complexes,Based on Control of the Excited States by Metalation

The thermal and photochemical reactions of a newly synthesized complex, [Ru^II(TPA)(tpphz)]²⁺ ( 1 ; TPA=tris(2‐pyridylmethyl)amine, tpphz=tetrapyrido[3,2‐a:2′,3′‐c:3′′,2′′‐h: 2′′′,3′′′‐j]phenazine), and its derivatives have been investigated. Heating a solution of complex 1 (closed form) and its derivatives in MeCN caused the partial dissociation of one pyridylmethyl moiety of the TPA ligand and the resulting vacant site on the Ru^II center was occupied by a molecule of MeCN from the solvent to give a dissociated complex, [Ru^II(η³‐TPA)(tpphz)(MeCN)]²⁺ ( 1′ , open form), and its derivatives, respectively, in quantitative yields. The thermal dissociation reactions were investigated on the basis of kinetics analysis, which indicated that the reactions proceeded through a seven‐coordinate transition state. Although the backwards reaction was induced by photoirradiation of the MLCT absorption bands, the photoreaction of complex 1′ reached a photostationary state between complexes 1 and 1′ and, hence, the recovery of complex 1 from complex 1′ was 67 %. Upon protonation of complex 1 at the vacant site of the tpphz ligand, the efficiency of the photoinduced recovery of complex 1 +H⁺ from complex 1′ +H⁺ improved to 83 %. In contrast, dinuclear μ‐tpphz complexes 2 and 3 , which contained the Ru^II(TPA)(tpphz) unit and either a Ru^II(bpy)₂ or Pd^IICl₂ moiety on the other coordination edge of the tpphz ligand, exhibited 100 % photoconversion from their open forms into their closed forms ( 2′ → 2 and 3′ → 3 ). These results are the first examples of the complete photochromic structural change of a transition‐metal complex, as represented by complete interconversion between its open and closed forms. Scrutinization by performing optical and electrochemical measurements allowed us to propose a rationale for how metal coordination at the vacant site of the tpphz ligand improves the efficiency of photoconversion from the open form into the closed form. It is essential to lower the energy level of the triplet metal‐to‐ligand charge‐transfer excited state (³MLCT*) of the closed form relative to that of the triplet metal‐centered excited state (³MC*) by metal coordination. This energy‐level manipulation hinders the transition from the ³MLCT* state into the ³MC* state in the closed form to block the partial photodissociation of the TPA ligand.     

In vivo multispectral imaging of the absorption and scattering properties of exposed brain using a digital red–green–blue camera

Optical Review - To evaluate multi-spectral images of the absorption and scattering properties in the cerebral cortex of rat brain, we investigated spectral reflectance images estimated by the...